marlin

Commit graph

Autor	SHA1	Nachricht	Datum
alexborro	d74aabf259	Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation"	vor 10 Jahren
John Davis	e99f24ff2f	Update planner.h Changed level and leveling to compensation.	vor 10 Jahren
Scott Lahteine	07c6b5ab71	Using axis constants	vor 10 Jahren
Justin Nesselrotte	07c0eeee99	Fixed a comment in the planner	vor 10 Jahren
Alex Borro	253dfc4bc1	Bed Auto Leveling feature Check the Readme for instruction how to enable and configure the feature	vor 11 Jahren
Scott Lahteine	5dabc95409	Apply all changes from latest Marlin_V1 Diffed and merged, preserving my updates	vor 11 Jahren
Erik van der Zalm	971ec35135	Expanded M302 to allow setting the temp	vor 11 Jahren
Erik van der Zalm	bd2cd4903e	Added #ifdef BARICUDA around the BariCUDA changes	vor 11 Jahren
Jordan Miller	fbd899a37d	Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.	vor 11 Jahren
Simon Oliver	93f0463b21	Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset). Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read. Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks. Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk. Conflicts: Marlin/language.h	vor 11 Jahren
Bernhard Kubicek	451f9cc6d1	Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.	vor 12 Jahren
Erik van der Zalm	e056bf8081	Added E-Jerk	vor 12 Jahren
Erik van der Zalm	aac7aa3bf0	Queued fan control. Issue #90	vor 12 Jahren
Daid	88d289caa1	Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature.	vor 12 Jahren
Erik van der Zalm	a0a1f81913	various changes	vor 12 Jahren
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	vor 13 Jahren
Bernhard	3c1a4aac2b	header file simplification	vor 13 Jahren
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	vor 13 Jahren
Bernhard	61c943b4bf	fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.	vor 13 Jahren
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	vor 13 Jahren
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) Advance (not tested)	vor 13 Jahren
Bernhard	0bc9daa4f7	make it compile with arduino 1.0 ; function is still untested.	vor 13 Jahren
Bernhard	b0c3871750	more fixing of the sanguino math round problem	vor 13 Jahren
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	vor 13 Jahren
Bernhard	26a1de1e44	force inline	vor 13 Jahren
Bernhard	f8e170a44b	planner optimization by inline functions	vor 13 Jahren
Erik van der Zalm	aad4b75b94	First parts 2nd extruder	vor 13 Jahren
Erik van der Zalm	c0f8c9fd72	Seperate ENDSTOP_INVERTING for X Y and Z Added simple endstop filter. Corrected M114 count display.	vor 13 Jahren
Bernhard Kubicek	5535e51bf6	Yes, thats the beta.	vor 13 Jahren
Bernhard Kubicek	379ea642e1	make tuneing sub-menu.	vor 13 Jahren
Erik van der Zalm	915ef2d4a1	Added software endstops	vor 13 Jahren
Bernhard Kubicek	8a08b8e07e	trying to get autotemp to work.	vor 13 Jahren
Bernhard Kubicek	a9c7da06e3	and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h	vor 13 Jahren
Erik van der Zalm	805d37f77b	Fixed some small planner bugs	vor 13 Jahren
Erik van der Zalm	65934eee9c	A lot of changes in the planner code	vor 13 Jahren
Bernhard Kubicek	36958ee305	minor changes and first not-well working version of autotemp	vor 13 Jahren
Bernhard Kubicek	1d171e9e52	reformating and some minor bugs/things found on the way.	vor 13 Jahren
Bernhard Kubicek	00674af3a8	merge from the branch bkubicek/Marlin/zalmmerge	vor 13 Jahren
Erik van der Zalm	094afe7c10	Merged Marlin, Marlin non gen6 and Ultimaker changes	vor 13 Jahren

36 Commits (489b4fd3a5cf6bb813f979314e805f2d00f55546)