Scott Lahteine
4bc4351250
Date refresh
6 jaren geleden
Thomas Moore
63fd23ab1c
Cleanup MKS-SBASE compile warnings
6 jaren geleden
Thomas Moore
429e6ba8a6
Fix lcd_preheat dummy variable types
6 jaren geleden
GMagician
719cd53e09
Standardized max temp values
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
6 jaren geleden
Bob-the-Kuhn
0ea9cdf4f2
TMC2208 sanity check
6 jaren geleden
Roxy-3D
7c469c0712
Suggested change to fix Due compile problem
6 jaren geleden
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 (#9236 )
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
6 jaren geleden
GMagician
c371bdc499
Expand RAMP case light possibilities
Pin 6 is only used by servos when 2 or more of them are used
6 jaren geleden
Roxy-3D
9d0cf02fef
Correct mesh size calculations
6 jaren geleden
Roxy-3D
af9b32e3b9
Give PronterFace time to print the UBL What information...
Give PronterFace time to print the UBL What information...
6 jaren geleden
Roxy-3D
acb1e31374
Fix UBL Mesh Size regression
6 jaren geleden
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm (#9204 )
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
6 jaren geleden
blye
554d849827
Fix duration when time is exactly 86400s
6 jaren geleden
Christopher Pepper
6f1bf5d212
LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256
6 jaren geleden
Christopher Pepper
1e65562d55
LPC1768: HAL: only initialise used HardwareSerial ports
Misc formatting
6 jaren geleden
Roxy-3D
9dacd54a50
Get FT-i3-2020 configuration files into compliance with ?_BED_SIZE
6 jaren geleden
Scott Lahteine
d178d6e921
M503 patch for EEPROM_CHITCHAT off
Fix #9155
6 jaren geleden
Scott Lahteine
fa432508b0
Followup to Ender config
6 jaren geleden
Scott Lahteine
43d3d024ac
Update tmc_util.cpp
6 jaren geleden
Panayiotis Savva
ad500b01e0
Fixes TMC compilation error
6 jaren geleden
Scott Lahteine
2038722c52
LARGE_FLASH obsolete
6 jaren geleden
Scott Lahteine
f887719a40
Creality Ender board support
6 jaren geleden
Scott Lahteine
9a2dd0bc5a
Creality Ender 2/4 configuration
6 jaren geleden
Scott Lahteine
2c18faf3e4
General cleanups for HAL
6 jaren geleden
Scott Lahteine
42933c804a
Cleanups for STM32F7
6 jaren geleden
Morten
a0246c5c96
Add support for STM32F7 MCU
6 jaren geleden
Scott Lahteine
a27fa80a7e
More featureful CR-10S configuration
6 jaren geleden
Scott Lahteine
a408209d24
More reliable temperature serial report?
6 jaren geleden
Scott Lahteine
5f807e37c5
A second rename saves nine
6 jaren geleden
Scott Lahteine
02ff12d491
More up front option to show SD percentage
6 jaren geleden
Scott Lahteine
e753d6298f
FLSUN Kossel example configs
6 jaren geleden
Scott Lahteine
77c2d810f9
Bring configs up to date
6 jaren geleden
Scott Lahteine
3952070800
Link to marlinfw.org boot screen tool
6 jaren geleden
Scott Lahteine
0cd397a3f8
Add instructions for Malyan M150
6 jaren geleden
Scott Lahteine
344ebc3bd2
Create and use pins_MELZI_MALYAN.h for Malyan M150
6 jaren geleden
Scott Lahteine
094e9b1dab
Remove ARDUINO_ARCH_SAM from serial.h too?
6 jaren geleden
Scott Lahteine
c37d38886c
Fix serial.h avr block
Followup to #8148
6 jaren geleden
Scott Lahteine
4f5e087ff4
Planner anti-stutter by Sebastian Popp
6 jaren geleden
Scott Lahteine
ac368f2788
Add STEPPER_ISR_ENABLED() to HALs
Some also get a `HAL_timer_interrupt_enabled` function.
6 jaren geleden
Marvin Sinister
50c55b25f7
Renamed to upercase
6 jaren geleden
GMagician
6667a916a4
Indentation fix
6 jaren geleden
GMagician
be717b3c07
Save some program memory
This will save some program memory with no speed lose
6 jaren geleden
GMagician
f37c64ee5b
Fix unsupported CMD59
It seems that some SD cards don't support CRC_ON_OFF command. This fix will permit to use also these cards but leaving CRC check active on the system
6 jaren geleden
Thomas Moore
cfd989d7c5
Fix EEPROM SettingsData for 32-bit architectures
6 jaren geleden
Scott Lahteine
742cff5f3c
Followup to #9141
6 jaren geleden
Thomas Moore
84de428d30
[2.0.x] Fix compile errors (#9141 )
* Update persistent_store_impl.cpp
* Remove define BYTE from serial functions since Arduino docs typically show 0 for the normal case.
6 jaren geleden
Bob-the-Kuhn
e633ce06c7
LCD contrast type mismatch is back
WORKS!
6 jaren geleden
Scott Lahteine
8ac246162e
Creality CR-10S configurations
Provided by printedsolid.com
6 jaren geleden
Scott Lahteine
048486390e
Bring some configs up to date
6 jaren geleden
Scott Lahteine
6a043eee55
Various updates for TMC support
6 jaren geleden