Erik van der Zalm
554cc1718d
Fiexed E_ENABLE_PIN errors
hace 12 años
Erik van der Zalm
617968ab76
G92 fix
hace 12 años
Erik van der Zalm
e017228569
Merged multiple extruder support.
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
hace 12 años
Bernhard
3320a5b37d
make autotemp compatile for use without pid
hace 12 años
Bernhard
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
hace 12 años
Bernhard
82c99625fa
instant stop of sd prints from the panel.
hace 12 años
Bernhard
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
hace 12 años
Bernhard
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
hace 12 años
Bernhard
b1d84d879b
st_synchronize back to normal..
hace 12 años
Bernhard
dde4b40fa9
disable steppers in runout prevention
hace 12 años
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
hace 12 años
Bernhard
aa4f9a6474
better values.
hace 12 años
Bernhard
87fd249c43
made runout prevention independent of tempeorarily set esteps
hace 12 años
Bernhard
1ec0c3b68a
extruder runout prevention.
hace 12 años
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
hace 12 años
Bernhard
cc4a9cdb69
added autostart procedure trigger to the ultralcd menu
hace 12 años
Bernhard
61c943b4bf
fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.
hace 12 años
Keegi
bae1e422f6
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
hace 12 años
Bernhard
754d2d69b2
z homing sound fix, for now until the actual cause is found..
hace 12 años
Bernhard
986f0ba76c
moved <stdio.h> to more dominant location.
hace 12 años
Bernhard
460b788d78
repaired homing position setting.
hace 12 años
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
hace 12 años
Bernhard
cf50ba140f
added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.
hace 12 años
Erik van der Zalm
89e832c295
Update endstops only for homing. (use less resources when not used)
hace 12 años
Erik van der Zalm
b99c49ec3b
Add option to only check endstop when homing
hace 12 años
Erik van der Zalm
af22e9cd38
Some advance modifications
hace 12 años
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
hace 12 años
Bernhard
dfd240b260
overworked autotemp, removed one layer of nesting from the ultralcd.
hace 12 años
Bernhard
4f909963e4
make QUICKHOME configureable
hace 12 años
Erik van der Zalm
6b86f15686
More 2nd extruder implementation. (Not usable)
Advance (not tested)
hace 12 años
Bernhard
0bc9daa4f7
make it compile with arduino 1.0 ; function is still untested.
hace 12 años
Bernhard
b0c3871750
more fixing of the sanguino math round problem
hace 13 años
Bernhard
9c57453168
removed stream.h referenece from marlinserial.
hace 13 años
Bernhard
59205ac5fc
preliminiary implementation for the early heating finish.
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
hace 13 años
Bernhard
7a4be21b4f
made it compile if arduino decides to include files in a differnt order. DEC HEX and stuff now defined in MarlinSerial.h
hace 13 años
Bernhard
716e89b87c
first homing move diagonal towards home switches.
hace 13 años
Bernhard
d00b7e5587
repaired compiliation in windows
hace 13 años
Bernhard
e4ab0e5982
more inlines
hace 13 años
Bernhard
8cb29921a0
possible stepper release after sd printing
hace 13 años
Bernhard
b19c8b74b9
force inline
hace 13 años
Erik van der Zalm
6d95644c0d
Moved M88 into M84. (M84 E)
hace 13 años
Erik van der Zalm
7216a12856
Disabled M88 for boards that don't have seperate enable pins.
hace 13 años
Erik van der Zalm
98805c9228
Added M88 command. (Request from Action68)
hace 13 años
Bernhard
85da81e673
inlineing of small functions in serial
hace 13 años
Bernhard
b9ad0bb2ce
removed unecessary indirect register adressing in serial.
hace 13 años
Bernhard
dd5ca68c87
get rid of indirect ringbuffer calls, made some inlines, removed virtual and streaming class requirements.
hace 13 años
Erik van der Zalm
dd5296ad4d
Fixed temperature reading bug.
(When using the lower and upper adc input bank)
hace 13 años
Erik van der Zalm
f75f426dfa
Removed interrupt nesting in the stepper ISR.
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
hace 13 años
Bernhard
2d9a715655
first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops.
hace 13 años
Bernhard
d2f034ba84
lcd message from gcode, m117
hace 13 años