marlin

Grafico dei commit

Autore	SHA1	Messaggio	Data
Bernhard	0183e6332a	made prepare->autostart independent of current folder.	12 anni fa
Bernhard	1532200435	found error in filenames. One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely	12 anni fa
Christian Thalhammer	fde51084f3	set SD file delete to M30; switch printime output to M31	12 anni fa
Blair Thompson	046a8e0039	Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.	12 anni fa
Erik van der Zalm	c6f2ec3c82	remove stop_heating_wait	12 anni fa
Michael Moon	5aadc2f5ca	cardreader needs to include some other files	13 anni fa
Michael Moon	8d0916af13	allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications	13 anni fa
Bernhard	729cde4475	fix autostart failure if in wrong directory	13 anni fa
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	13 anni fa
Bernhard	3c1a4aac2b	header file simplification	13 anni fa
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	13 anni fa
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	13 anni fa
Bernhard	82c99625fa	instant stop of sd prints from the panel.	13 anni fa
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	13 anni fa
Bernhard	cc4a9cdb69	added autostart procedure trigger to the ultralcd menu	13 anni fa
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 anni fa
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	13 anni fa
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	13 anni fa
Bernhard	6d6f323535	make an option if sd-card stop should release the steppers.	13 anni fa
Bernhard Kubicek	379ea642e1	make tuneing sub-menu.	13 anni fa
Bernhard Kubicek	b21d5193f2	made ultralcd compatible with folders.	13 anni fa
Bernhard Kubicek	5ad1d19384	make it compile without sd_support	13 anni fa
Bernhard Kubicek	f0154de5b3	found bug that disabled printing from root.	13 anni fa
Bernhard Kubicek	869cee74e6	host-based sd card printing seems now to work with folders	13 anni fa
Bernhard Kubicek	70abca195a	overworked cardreader for folder support; not finished yet.	13 anni fa
Bernhard Kubicek	ab154d5592	project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram.	13 anni fa
Bernhard Kubicek	7b70caab7c	made progmem mainly, found one bug in cardreader, added a empty class for cardreader in case no sd support.	13 anni fa
Bernhard Kubicek	907daa49af	made loop counters uint8_t most were int(16_t) before	13 anni fa
Bernhard Kubicek	fc0064e525	made cardreader more selfsustained	13 anni fa
Bernhard Kubicek	01df04e02c	first compile with the cardreader class	13 anni fa

9 Commit (7bb326d389cd5a9f14a99bf0fa8275712fe4b380)