425 Revīzijas (a873541ef6b23100dc6dec15e6195e87cef6fce5)

Autors SHA1 Ziņojums Datums
  Ian Jackson a873541ef6 Marlin.pde: include comment for emacs mode 12 gadus atpakaļ
  Chris Palmer 538189cc19 Fixed soft limits when the origin is in the middle. 12 gadus atpakaļ
  ErikZalm 686011a548 Fixed typo 12 gadus atpakaļ
  Erik van der Zalm ea2c19f978 Added CoreXY support (Thanks Ilan Moyer) 12 gadus atpakaļ
  Erik van der Zalm aa65fe22ed decoupled axes sucessfully at least on pure x or y jog 12 gadus atpakaļ
  daid 12de8fff81 Support step motor controllers with active low step pins. 12 gadus atpakaļ
  Erik van der Zalm b67dacdc8f Fixed AD595 define 12 gadus atpakaļ
  Bernhard d3002ef741 corrected retract 12 gadus atpakaļ
  Bernhard 0c123950e9 __ header file replace 12 gadus atpakaļ
  Bernhard bf077125b9 added firmware retract. disabled by default 12 gadus atpakaļ
  Bernhard 0e5e249ab5 added individual pullup setting option to have finer control in case there is a special z-min sensor, for example 12 gadus atpakaļ
  Bernhard Kubicek b7fc14bc65 repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright. 12 gadus atpakaļ
  ErikZalm 9e1021efbe Fixed SL bug. 12 gadus atpakaļ
  Daid e9bec9b6fe Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6) 12 gadus atpakaļ
  linagee fbd282b3ba Update Marlin/Configuration.h 12 gadus atpakaļ
  linagee 2e8c5049c5 Update Marlin/thermistortables.h 12 gadus atpakaļ
  linagee 2d0d8e5272 Small correction. 12 gadus atpakaļ
  Daid 4d7fe7115f Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands. 12 gadus atpakaļ
  linagee 9e9db65c3f Update Marlin/thermistortables.h 12 gadus atpakaļ
  linagee bd966ef389 Update Marlin/thermistortables.h 12 gadus atpakaļ
  linagee 775da3f103 Added top ratings and extended to ADC=1 for table 3 and 5. 12 gadus atpakaļ
  linagee 96a4baa0be Update Marlin/thermistortables.h 12 gadus atpakaļ
  linagee 2aa9f7b131 Update Marlin/thermistortables.h 12 gadus atpakaļ
  linagee c4490f5f3d Update Marlin/Configuration.h 12 gadus atpakaļ
  linagee dd9144994e Tested May 19 - It works! Verified with separate thermocouple TM-902C also. 12 gadus atpakaļ
  linagee 4c37d0d9f1 Extended range above 250C. (Operating range states up to 300C) 12 gadus atpakaļ
  Daid b59724e42b Add strigification for extruder amount in M115 report. 12 gadus atpakaļ
  Daid 16413bb8f2 Last M401 update, refresh the LCD during an M401 wait. 12 gadus atpakaļ
  Daid b3941fce5c Update after testing 12 gadus atpakaļ
  Daid d494688565 Do not initialize in the header file. 12 gadus atpakaļ
  Daid 516ec90242 Add M401 - Wait for user on LCD button press 12 gadus atpakaļ
  linagee de2ca3b2e8 Grammar correction. 12 gadus atpakaļ
  linagee c2fc466e1b Update Marlin/Configuration.h 12 gadus atpakaļ
  linagee 241f5a4c0e Update Marlin/thermistortables.h 12 gadus atpakaļ
  linagee 9f9f498491 Update Marlin/Configuration.h 12 gadus atpakaļ
  Erik van der Zalm e31bef31ad Limit PID autotune PWM to PID_MAX 12 gadus atpakaļ
  Erik van der Zalm ba96059203 add additional dropsegments test 12 gadus atpakaļ
  zittix fbd91ab0b5 Fixes #153 for bad call to abs() 12 gadus atpakaļ
  MaikStohn 159ae90874 bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only) 12 gadus atpakaļ
  MaikStohn e48f5aa6a7 fixed typo 12 gadus atpakaļ
  MaikStohn 1efe9ab497 changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu 12 gadus atpakaļ
  Guan Yang 602c8ee02b Melzi support 12 gadus atpakaļ
  Daid 279d00da9f Fixed #if for Ultimaker. 12 gadus atpakaļ
  Bernhard Kubicek 451f9cc6d1 Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. 12 gadus atpakaļ
  Erik de Bruijn e3fe1f0d00 Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed. 12 gadus atpakaļ
  Erik de Bruijn d88205d89d Suggestion to improve (TODO), no actual code changed 12 gadus atpakaļ
  Erik de Bruijn 5aa80e6c05 Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel" 12 gadus atpakaļ
  MaikStohn b657a18449 Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" 12 gadus atpakaļ
  MaikStohn d188ae4c9d added missing declaration of buttons_init() 12 gadus atpakaļ
  MaikStohn 3682d9bd5b magic PROGMEM defines to avoid hundreds of wrong GCC warnings 12 gadus atpakaļ