marlin

コミットグラフ

作成者	SHA1	メッセージ	日付
daid	2a77c84c8f	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	12年前
Erik van der Zalm	f87c80889f	Fixed M109 timer overflow (reported by triffid)	12年前
Erik van der Zalm	154de69c02	Print configuration.h version during startup (thanks hairykiwi)	12年前
Erik van der Zalm	598eb1d4f1	Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)	12年前
Erik van der Zalm	9173a5713b	Teensylu support.	12年前
Erik van der Zalm	5113513cb2	RC 1	12年前
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. One for common settings. One for advanced settings.	12年前
Erik van der Zalm	e45e5c68bb	Added support for Gen3+ (Pins file only) Added late z enable. (blddk request) Only calculate look ahead if >2 moves in buffer. Removed some FORCE_INLINE to save memory. Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	12年前
haxar	6cc6029d7a	M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print	12年前
Bernhard	157aa7f2fd	m115 eol fix	12年前
Bernhard	7aeb45303d	small mistake	12年前
Bernhard	cee5f9020a	added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.	12年前
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	12年前
Bernhard	3c1a4aac2b	header file simplification	12年前
Bernhard	212515148e	added m240 photography support. default off	12年前
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	12年前
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	12年前
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	12年前
Erik van der Zalm	617968ab76	G92 fix	12年前
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	12年前
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	12年前
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	12年前
Bernhard	dde4b40fa9	disable steppers in runout prevention	12年前
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	12年前
Bernhard	aa4f9a6474	better values.	12年前
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	12年前
Bernhard	1ec0c3b68a	extruder runout prevention.	12年前
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	12年前
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	12年前
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	12年前
Bernhard	460b788d78	repaired homing position setting.	12年前
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	12年前
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	12年前
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	12年前
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	12年前
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	12年前
Bernhard	4f909963e4	make QUICKHOME configureable	12年前
Bernhard	b0c3871750	more fixing of the sanguino math round problem	13年前
Bernhard	716e89b87c	first homing move diagonal towards home switches.	13年前
Bernhard	e4ab0e5982	more inlines	13年前
Bernhard	8cb29921a0	possible stepper release after sd printing	13年前
Erik van der Zalm	6d95644c0d	Moved M88 into M84. (M84 E)	13年前
Erik van der Zalm	7216a12856	Disabled M88 for boards that don't have seperate enable pins.	13年前
Erik van der Zalm	98805c9228	Added M88 command. (Request from Action68)	13年前
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	13年前
Bernhard	2d9a715655	first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops.	13年前
Bernhard	d2f034ba84	lcd message from gcode, m117	13年前
Erik van der Zalm	aad4b75b94	First parts 2nd extruder	13年前
Bernhard	a0dc66f7bf	Home retract distance configureable per axis.	13年前
Bernhard	4d6a5c29df	disable steppers as routine in stepper.cpp	13年前

最初前ページ 1 2 3 次ページ最後

115 コミット (b58eae7657990e59bd6154c9b2a826baa22d7f61)