Erik van der Zalm
461dad6e05
Added : M32 - Select file and start SD print (Can be used when printing from SD card)
Untested
11 jaren geleden
Scott Lahteine
a5cd582665
Support for 10 level deep SD folder hierarchy
11 jaren geleden
Lukasz Stefanowicz
d71f1e9bf6
Add (as an option) slower SD transfer mode
11 jaren geleden
Ketil Froyn
07e11c7cf5
Add command M928 to enable logging to file of received gcode commands
11 jaren geleden
Marius Kintel
e06d820909
Also skip .files and _files with long filenames
11 jaren geleden
daid303
1a8f54cea1
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
11 jaren geleden
daid303
6a9bee27cc
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
11 jaren geleden
daid303
97fa2a9c30
Few simple fixes that save RAM, as static strings are stored in RAM by default.
11 jaren geleden
daid303
43018a48c4
Fix for a few -Wextra warnings.
11 jaren geleden
daid
b69e75c89a
Added long filename support.
12 jaren geleden
Bernhard
0183e6332a
made prepare->autostart independent of current folder.
12 jaren geleden
Bernhard
1532200435
found error in filenames.
One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely
12 jaren geleden
Christian Thalhammer
fde51084f3
set SD file delete to M30; switch printime output to M31
12 jaren geleden
Blair Thompson
046a8e0039
Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.
12 jaren geleden
Erik van der Zalm
c6f2ec3c82
remove stop_heating_wait
12 jaren geleden
Michael Moon
5aadc2f5ca
cardreader needs to include some other files
12 jaren geleden
Michael Moon
8d0916af13
allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications
12 jaren geleden
Bernhard
729cde4475
fix autostart failure if in wrong directory
12 jaren geleden
Bernhard
57f9359a41
simplified the includes, makefile now works with arduino23
12 jaren geleden
Bernhard
3c1a4aac2b
header file simplification
12 jaren geleden
Bernhard
415aadf704
lcd panel bed support
advance and ultipanel not any more in default config
12 jaren geleden
Bernhard
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
12 jaren geleden
Bernhard
82c99625fa
instant stop of sd prints from the panel.
12 jaren geleden
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
12 jaren geleden
Bernhard
cc4a9cdb69
added autostart procedure trigger to the ultralcd menu
12 jaren geleden
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
12 jaren geleden
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
12 jaren geleden
Bernhard
dfd240b260
overworked autotemp, removed one layer of nesting from the ultralcd.
12 jaren geleden
Bernhard
6d6f323535
make an option if sd-card stop should release the steppers.
12 jaren geleden
Bernhard Kubicek
379ea642e1
make tuneing sub-menu.
12 jaren geleden
Bernhard Kubicek
b21d5193f2
made ultralcd compatible with folders.
12 jaren geleden
Bernhard Kubicek
5ad1d19384
make it compile without sd_support
12 jaren geleden
Bernhard Kubicek
f0154de5b3
found bug that disabled printing from root.
12 jaren geleden
Bernhard Kubicek
869cee74e6
host-based sd card printing seems now to work with folders
12 jaren geleden
Bernhard Kubicek
70abca195a
overworked cardreader for folder support; not finished yet.
12 jaren geleden
Bernhard Kubicek
ab154d5592
project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram.
12 jaren geleden
Bernhard Kubicek
7b70caab7c
made progmem mainly, found one bug in cardreader, added a empty class for cardreader in case no sd support.
12 jaren geleden
Bernhard Kubicek
907daa49af
made loop counters uint8_t most were int(16_t) before
12 jaren geleden
Bernhard Kubicek
fc0064e525
made cardreader more selfsustained
12 jaren geleden
Bernhard Kubicek
01df04e02c
first compile with the cardreader class
12 jaren geleden