marlin

Commit graph

Autor	SHA1	Nachricht	Datum
Scott Lahteine	665e45e0ba	Reduce string storage, use masking 'seen'	vor 5 Jahren
Scott Lahteine	f01f0d1956	Drop C-style 'void' argument	vor 5 Jahren
Scott Lahteine	75efa3cdac	Reorganize HAL (#14832)	vor 5 Jahren
Scott Lahteine	e85eca2630	HAL cleanup, Teensy 3.1 platform	vor 5 Jahren
Scott Lahteine	fe02241044	NONE on combined options	vor 5 Jahren
Scott Lahteine	e7682eea42	Use Arduino.h include wrapper (#13877)	vor 5 Jahren
Scott Lahteine	b376c7e374	Group DISABLED items	vor 5 Jahren
Scott Lahteine	ce563d7c2e	Various general cleanups Mostly from the L6470-oriented PR	vor 5 Jahren
Scott Lahteine	c986239837	A single SERIAL_ECHO macro type (#12557)	vor 6 Jahren
Marcio Teixeira	ccbd045f02	Fixed warning about comparing signed to unsigned (#11909)	vor 6 Jahren
Marcio Teixeira	c411e7eb0d	[2.0.x] Squelch compiler warnings seen with -Wall (#11889)	vor 6 Jahren
Scott Lahteine	2a61c9a939	Various fixups to configs, spacing, etc.	vor 6 Jahren
Dave Johnson	c64199941e	Compile only selected PIO environment (#11519)	vor 6 Jahren
Thomas Moore	f7efac57b7	Multi-host support	vor 7 Jahren
Eduardo José Tagle	ac168a03c8	Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) (#8651) * Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port * Improving the Fast IO port access implementation on Arduino DUE * Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling) * Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it. * Fixing the case where the serial port selected is the USB device * Adding configuration for the Makerparts 3D printer (www.makerparts.net) * Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration * Fine tuned Maximum acceleration for MakerParts printer * Style cleanup * Style cleanup (2) * Style fixes (3) * Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port * Improving the Fast IO port access implementation on Arduino DUE * Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling) * Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it. * Fixing the case where the serial port selected is the USB device * Adding configuration for the Makerparts 3D printer (www.makerparts.net) * Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration * Fine tuned Maximum acceleration for MakerParts printer * Style cleanup * Style changes to u8g_dev_st7920_128_64_sw_spi.cpp * Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles * After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working * Moved comments out of macro, otherwise, token pasting does not properly work sometimes * Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency * Update u8g_dev_st7920_128_64_sw_spi.cpp * Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present	vor 7 Jahren

3 Commits (bfad23d3e2e590b257ebe4317d7b14cc2dd3435c)