marlin

Commit Graph

Autor	SHA1	Mensaje	Fecha
Erik van der Zalm	e45e5c68bb	Added support for Gen3+ (Pins file only) Added late z enable. (blddk request) Only calculate look ahead if >2 moves in buffer. Removed some FORCE_INLINE to save memory. Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	hace 12 años
haxar	6cc6029d7a	M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print	hace 12 años
Bernhard	157aa7f2fd	m115 eol fix	hace 13 años
Bernhard	7aeb45303d	small mistake	hace 13 años
Bernhard	cee5f9020a	added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.	hace 13 años
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	hace 13 años
Bernhard	3c1a4aac2b	header file simplification	hace 13 años
Bernhard	212515148e	added m240 photography support. default off	hace 13 años
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	hace 13 años
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	hace 13 años
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	hace 13 años
Erik van der Zalm	617968ab76	G92 fix	hace 13 años
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	hace 13 años
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	hace 13 años
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	hace 13 años
Bernhard	dde4b40fa9	disable steppers in runout prevention	hace 13 años
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	hace 13 años
Bernhard	aa4f9a6474	better values.	hace 13 años
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	hace 13 años
Bernhard	1ec0c3b68a	extruder runout prevention.	hace 13 años
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	hace 13 años
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	hace 13 años
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	hace 13 años
Bernhard	460b788d78	repaired homing position setting.	hace 13 años
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	hace 13 años
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	hace 13 años
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	hace 13 años
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	hace 13 años
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	hace 13 años
Bernhard	4f909963e4	make QUICKHOME configureable	hace 13 años
Bernhard	b0c3871750	more fixing of the sanguino math round problem	hace 13 años
Bernhard	716e89b87c	first homing move diagonal towards home switches.	hace 13 años
Bernhard	e4ab0e5982	more inlines	hace 13 años
Bernhard	8cb29921a0	possible stepper release after sd printing	hace 13 años
Erik van der Zalm	6d95644c0d	Moved M88 into M84. (M84 E)	hace 13 años
Erik van der Zalm	7216a12856	Disabled M88 for boards that don't have seperate enable pins.	hace 13 años
Erik van der Zalm	98805c9228	Added M88 command. (Request from Action68)	hace 13 años
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	hace 13 años
Bernhard	2d9a715655	first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops.	hace 13 años
Bernhard	d2f034ba84	lcd message from gcode, m117	hace 13 años
Erik van der Zalm	aad4b75b94	First parts 2nd extruder	hace 13 años
Bernhard	a0dc66f7bf	Home retract distance configureable per axis.	hace 13 años
Bernhard	4d6a5c29df	disable steppers as routine in stepper.cpp	hace 13 años
Bernhard	74d0032e25	cooldown blocking selectable by #define.	hace 13 años
Bernhard	57e163e989	typo	hace 13 años
Bernhard	b58787a367	now velocities are also set in mm/sec in gcode.	hace 13 años
Erik van der Zalm	6ac9b2e761	Fixed residency time bug. (Thanks to Sound :-) )	hace 13 años
Erik van der Zalm	0e0e4945d8	Removed ISR overtaken message from ISR routine	hace 13 años
Erik van der Zalm	c0f8c9fd72	Seperate ENDSTOP_INVERTING for X Y and Z Added simple endstop filter. Corrected M114 count display.	hace 13 años
Bernhard Kubicek	5535e51bf6	Yes, thats the beta.	hace 13 años

Primera Página Anterior 1 2 3 Página Siguiente Última

108 Commits (e45e5c68bb67ddec39b9bda25cf96396c12fe10b)