marlin/platformio.ini

#
# Marlin Firmware
# PlatformIO Configuration File
#
# For detailed documentation with EXAMPLES:
#
# http://docs.platformio.org/en/latest/projectconf.html
#

# Automatic targets - enable auto-uploading
# targets = upload

#
# By default platformio build will abort after 5 errors.
# Remove '-fmax-errors=5' from build_flags below to see all.
#

[platformio]
src_dir      = Marlin
boards_dir   = buildroot/share/PlatformIO/boards
default_envs = megaatmega2560

[common]
default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
build_flags = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__
lib_deps =
  U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
  LiquidCrystal@1.3.4
  TMCStepper@>=0.5.0,<1.0.0
  Adafruit NeoPixel@1.2.5
  LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip
  Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip
  SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
  SailfishRGB_LED=https://github.com/mikeshub/SailfishRGB_LED/archive/master.zip
  SlowSoftI2CMaster=https://github.com/mikeshub/SlowSoftI2CMaster/archive/master.zip

#################################
#                               #
#   Unique Core Architectures   #
#                               #
#  Add a new "env" below if no  #
# entry has values suitable to  #
#   build for a given board.    #
#                               #
#################################

#
# ATmega2560
#
[env:megaatmega2560]
platform          = atmelavr
framework         = arduino
board             = megaatmega2560
build_flags       = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed     = 250000

#
# ATmega1280
#
[env:megaatmega1280]
platform          = atmelavr
framework         = arduino
board             = megaatmega1280
build_flags       = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed     = 250000

#
# AT90USB1286 boards using CDC bootloader
# - BRAINWAVE
# - BRAINWAVE_PRO
# - SAV_MKI
# - TEENSYLU
#
[env:at90usb1286_cdc]
platform      = teensy
framework     = arduino
board         = at90usb1286
build_flags   = ${common.build_flags}
lib_deps      = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000

#
# AT90USB1286 boards using DFU bootloader
# - PrintrBoard
# - PrintrBoard Rev.F
# - ? 5DPRINT ?
#
[env:at90usb1286_dfu]
platform      = teensy
framework     = arduino
board         = at90usb1286
build_flags   = ${common.build_flags}
lib_deps      = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000

#
# Due (Atmel SAM3X8E ARM Cortex-M3)
#
#  - RAMPS4DUE
#  - RADDS
#
[env:DUE]
platform      = atmelsam
framework     = arduino
board         = due
build_flags   = ${common.build_flags}
lib_deps      = ${common.lib_deps}
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_DUE>
monitor_speed = 250000
[env:DUE_USB]
platform      = atmelsam
framework     = arduino
board         = dueUSB
build_flags   = ${common.build_flags}
lib_deps      = ${common.lib_deps}
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_DUE>
monitor_speed = 250000
[env:DUE_debug]
# Used when WATCHDOG_RESET_MANUAL is enabled
platform      = atmelsam
framework     = arduino
board         = due
build_flags   = ${common.build_flags}
  -funwind-tables
  -mpoke-function-name
lib_deps      = ${common.lib_deps}
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_DUE>
monitor_speed = 250000

#
# NXP LPC176x ARM Cortex-M3
#
[env:LPC1768]
platform          = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.0.zip
framework         = arduino
board             = nxp_lpc1768
build_flags       = -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
# debug options for backtrace
#  -funwind-tables
#  -mpoke-function-name
lib_ldf_mode      = off
lib_compat_mode   = strict
extra_scripts     = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
src_filter        = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
monitor_speed     = 250000
lib_deps          = Servo
  LiquidCrystal
  U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
  TMCStepper=https://github.com/p3p/TMCStepper/archive/pr_lpctimingfix.zip
  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/release.zip
  SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip

[env:LPC1769]
platform          = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.0.zip
framework         = arduino
board             = nxp_lpc1769
build_flags       = -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
# debug options for backtrace
#  -funwind-tables
#  -mpoke-function-name
lib_ldf_mode      = off
lib_compat_mode   = strict
extra_scripts     = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
src_filter        = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
monitor_speed     = 250000
lib_deps          = Servo
  LiquidCrystal
  U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
  TMCStepper=https://github.com/p3p/TMCStepper/archive/pr_lpctimingfix.zip
  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/release.zip

#
# Sanguinololu (ATmega644p)
#
[env:sanguino_atmega644p]
platform      = atmelavr
framework     = arduino
board         = sanguino_atmega644p
build_flags   = ${common.build_flags}
lib_deps      = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000

#
# Sanguinololu (ATmega1284p)
#
[env:sanguino_atmega1284p]
platform      = atmelavr
framework     = arduino
board         = sanguino_atmega1284p
build_flags   = ${common.build_flags}
lib_deps      = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000

#
# Melzi and clones (ATmega1284p)
#
[env:melzi]
platform      = atmelavr
framework     = arduino
board         = sanguino_atmega1284p
build_flags   = ${common.build_flags} -fmerge-all-constants
upload_speed  = 57600
lib_deps      = ${common.lib_deps}
lib_ignore    = TMCStepper
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000

#
# Melzi and clones (Optiboot bootloader)
#
[env:melzi_optiboot]
platform      = atmelavr
framework     = arduino
board         = sanguino_atmega1284p
build_flags   = ${common.build_flags}
upload_speed  = 115200
lib_deps      = ${common.lib_deps}
lib_ignore    = TMCStepper
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed = 250000

#
# RAMBo
#
[env:rambo]
platform          = atmelavr
framework         = arduino
board             = reprap_rambo
build_flags       = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed     = 250000

#
# STM32F103RE
#
[env:STM32F103RE]
platform      = ststm32@5.6.0
framework     = arduino
board         = genericSTM32F103RE
build_flags   = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -std=gnu++14
  -DDEBUG_LEVEL=0
build_unflags = -std=gnu++11
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, SPI
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed = 250000
debug_tool    = stlink
upload_protocol = stlink

#
# STM32F103RC_fysetc
#
[env:STM32F103RC_fysetc]
platform          = ststm32@5.6.0
framework         = arduino
board             = genericSTM32F103RC
#board_build.core = maple
platform_packages = tool-stm32duino
extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
build_flags       = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -std=gnu++14
  -DDEBUG_LEVEL=0 -DHAVE_SW_SERIAL
build_unflags     = -std=gnu++11
lib_deps          = ${common.lib_deps}
  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
lib_ignore        = Adafruit NeoPixel, SPI
lib_ldf_mode      = chain
src_filter        = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed     = 250000
debug_tool        = stlink
upload_protocol   = serial

#
# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
#
[env:STM32F103RC_bigtree]
platform          = ststm32@5.6.0
framework         = arduino
board             = genericSTM32F103RC
platform_packages = tool-stm32duino
extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
build_flags       = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14
build_unflags     = -std=gnu++11
lib_deps          = ${common.lib_deps}
lib_ignore        = Adafruit NeoPixel, SPI
src_filter        = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed     = 115200

[env:STM32F103RC_bigtree_USB]
platform          = ststm32@5.6.0
framework         = arduino
board             = genericSTM32F103RC
platform_packages = tool-stm32duino
extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
build_flags       = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14 -DUSE_USB_COMPOSITE
build_unflags     = -std=gnu++11
lib_deps          = ${common.lib_deps}
lib_ignore        = Adafruit NeoPixel, SPI
src_filter        = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
monitor_speed     = 115200

#
# STM32F4 with STM32GENERIC
#
[env:STM32F4]
platform      = ststm32
framework     = arduino
board         = disco_f407vg
build_flags   = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, TMCStepper
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F7>
monitor_speed = 250000

#
# STM32F7 with STM32GENERIC
#
[env:STM32F7]
platform      = ststm32
framework     = arduino
board         = remram_v1
build_flags   = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, TMCStepper
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F4>
monitor_speed = 250000

#
# ARMED (STM32)
#
[env:ARMED]
platform    = ststm32@5.6.0
framework   = arduino
board       = armed_v1
build_flags = ${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
lib_deps    = ${common.lib_deps}
lib_ignore  = Adafruit NeoPixel
src_filter  = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000

#
# Longer 3D board in Alfawise U20 (STM32F103VET6)
#
[env:STM32F103VE_longer]
platform      = ststm32@5.6.0
framework     = arduino
board         = genericSTM32F103VE
monitor_speed = 250000
extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
build_flags   = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -std=gnu++14 -USERIAL_USB
  -DSTM32F1xx -DU20 -DTS_V12
build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, LiquidTWI2, SPI

#
# MKS Robin (STM32F103ZET6)
#
[env:mks_robin]
platform      = ststm32@5.6.0
framework     = arduino
board         = genericSTM32F103ZE
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin.py
build_flags   = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -std=gnu++14 -DSTM32_XL_DENSITY
build_unflags = -std=gnu++11
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, SPI

#
# MKS ROBIN LITE/LITE2 (STM32F103RCT6)
#
[env:mks_robin_lite]
platform      = ststm32@5.6.0
framework     = arduino
board         = genericSTM32F103RC
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_lite.py
build_flags   = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -std=gnu++14
build_unflags = -std=gnu++11
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, SPI

#
# MKS Robin Mini (STM32F103VET6)
#
[env:mks_robin_mini]
platform      = ststm32@5.6.0
framework     = arduino
board         = genericSTM32F103VE
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_mini.py
build_flags   = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -std=gnu++14
build_unflags = -std=gnu++11
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, SPI

#
# MKS Robin Nano (STM32F103VET6)
#
[env:mks_robin_nano]
platform      = ststm32@5.6.0
framework     = arduino
board         = genericSTM32F103VE
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_nano.py
build_flags   = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -std=gnu++14
build_unflags = -std=gnu++11
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, SPI

#
# JGAurora A5S A1 (STM32F103ZET6)
#
[env:jgaurora_a5s_a1]
platform      = ststm32@5.6.0
framework     = arduino
board         = genericSTM32F103ZE
extra_scripts = buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
build_flags   = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -DSTM32F1xx -std=gnu++14 -DSTM32_XL_DENSITY
build_unflags = -std=gnu++11
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, SPI
monitor_speed = 250000

#
# STM32F407VET6 with RAMPS-like shield
# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
# Shield - https://github.com/jmz52/Hardware
#
[env:STM32F407VE_black]
platform      = ststm32@5.4.3
framework     = arduino
board         = blackSTM32F407VET6
extra_scripts = pre:buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py
build_flags   = ${common.build_flags}
  -DSTM32F4 -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\"
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000

#
# Bigtreetech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
#
[env:BIGTREE_SKR_PRO]
platform      = ststm32@5.6.0
framework     = arduino
board         = BigTree_SKR_Pro
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags   = ${common.build_flags}
  -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\"
  -DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 -DHAVE_HWSERIAL6 -DSS_TIMER=4
lib_deps      =
  U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
  LiquidCrystal@1.3.4
  TMCStepper@>=0.5.2,<1.0.0
  Adafruit NeoPixel
  LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip
  Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip
  SoftwareSerialM=https://github.com/sjasonsmith/SoftwareSerialM/archive/SKR_PRO.zip
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000

#
# BIGTREE_SKR_BTT002 (STM32F407VET6 ARM Cortex-M4)
#
[env:BIGTREE_BTT002]
platform      = ststm32@5.6.0
framework     = arduino
board         = BigTree_Btt002
extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags   = ${common.build_flags}
  -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407VE\"
  -DTARGET_STM32F4 -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
  -DHAVE_HWSERIAL2
  -DHAVE_HWSERIAL3
  -DPIN_SERIAL2_RX=PD_6
  -DPIN_SERIAL2_TX=PD_5
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32>
monitor_speed = 250000

#
# Teensy 3.1 / 3.2 (ARM Cortex-M4)
#
[env:teensy31]
platform      = teensy
framework     = arduino
board         = teensy31
build_flags   = ${common.build_flags}
lib_deps      = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
lib_ignore    = Adafruit NeoPixel
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_TEENSY31_32>
monitor_speed = 250000

#
# Malyan M200 (STM32F103CB)
#
[env:STM32F103CB_malyan]
platform    = ststm32@5.6.0
framework   = arduino
board       = malyanM200
build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
  -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
src_filter  = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_ignore  = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL, SPI

#
# Chitu boards like Tronxy X5s (STM32F103ZET6)
#
[env:chitu_f103]
platform      = ststm32@5.6.0
framework     = arduino
board         = genericSTM32F103ZE
extra_scripts = buildroot/share/PlatformIO/scripts/chitu_crypt.py
build_flags   = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  ${common.build_flags} -DSTM32F1xx -std=gnu++14 -DSTM32_XL_DENSITY
build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps      = ${common.lib_deps}
lib_ignore    = Adafruit NeoPixel

#
# Teensy 3.5 / 3.6 (ARM Cortex-M4)
#
[env:teensy35]
platform      = teensy
framework     = arduino
board         = teensy35
build_flags   = ${common.build_flags}
lib_deps      = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
lib_ignore    = Adafruit NeoPixel
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_TEENSY35_36>
monitor_speed = 250000

#
# Espressif ESP32
#
[env:esp32]
platform      = espressif32
board         = esp32dev
framework     = arduino
upload_speed  = 115200
monitor_speed = 115200
upload_port = /dev/ttyUSB0
lib_deps =
  AsyncTCP=https://github.com/me-no-dev/AsyncTCP/archive/master.zip
  ESPAsyncWebServer=https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip
lib_ignore  = LiquidCrystal, LiquidTWI2, SailfishLCD, SailfishRGB_LED
src_filter  = ${common.default_src_filter} +<src/HAL/HAL_ESP32>

#
# FYSETC F6 V1.3
#
[env:fysetc_f6_13]
platform          = atmelavr
framework         = arduino
board             = fysetc_f6_13
build_flags       = ${common.build_flags}
board_build.f_cpu = 16000000L
lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
monitor_speed     = 250000

#
# Native
# No supported Arduino libraries, base Marlin only
#
[env:linux_native]
platform        = native
build_flags     = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined
src_build_flags = -Wall -IMarlin/src/HAL/HAL_LINUX/include
build_unflags   = -Wall
lib_ldf_mode    = off
lib_deps        =
extra_scripts   =
src_filter      = ${common.default_src_filter} +<src/HAL/HAL_LINUX>

#
# Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4)
#
[env:SAMD51_grandcentral_m4]
platform      = atmelsam
board         = adafruit_grandcentral_m4
framework     = arduino
build_flags   = ${common.build_flags} -std=gnu++17
extra_scripts = ${common.extra_scripts}
build_unflags = -std=gnu++11
lib_deps      = ${common.lib_deps}
src_filter    = ${common.default_src_filter} +<src/HAL/HAL_SAMD51>
debug_tool    = jlink

#
# Just print the dependency tree
#
[env:include_tree]
platform    = atmelavr
framework   = arduino
board       = megaatmega2560
build_flags = -c -H -std=gnu++11 -Wall -Os -D__MARLIN_FIRMWARE__
lib_deps    = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter  = +<src/Marlin.cpp>