My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

platformio.ini 21KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639
  1. #
  2. # Marlin Firmware
  3. # PlatformIO Configuration File
  4. #
  5. # For detailed documentation with EXAMPLES:
  6. #
  7. # http://docs.platformio.org/en/latest/projectconf.html
  8. #
  9. # Automatic targets - enable auto-uploading
  10. # targets = upload
  11. #
  12. # By default platformio build will abort after 5 errors.
  13. # Remove '-fmax-errors=5' from build_flags below to see all.
  14. #
  15. [platformio]
  16. src_dir = Marlin
  17. boards_dir = buildroot/share/PlatformIO/boards
  18. default_envs = megaatmega2560
  19. [common]
  20. default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
  21. extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
  22. build_flags = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__
  23. lib_deps =
  24. U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
  25. LiquidCrystal@1.3.4
  26. TMCStepper@>=0.5.0,<1.0.0
  27. Adafruit NeoPixel@1.2.5
  28. LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip
  29. Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip
  30. SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
  31. SailfishRGB_LED=https://github.com/mikeshub/SailfishRGB_LED/archive/master.zip
  32. SlowSoftI2CMaster=https://github.com/mikeshub/SlowSoftI2CMaster/archive/master.zip
  33. #################################
  34. # #
  35. # Unique Core Architectures #
  36. # #
  37. # Add a new "env" below if no #
  38. # entry has values suitable to #
  39. # build for a given board. #
  40. # #
  41. #################################
  42. #
  43. # ATmega2560
  44. #
  45. [env:megaatmega2560]
  46. platform = atmelavr
  47. framework = arduino
  48. board = megaatmega2560
  49. build_flags = ${common.build_flags}
  50. board_build.f_cpu = 16000000L
  51. lib_deps = ${common.lib_deps}
  52. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  53. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  54. monitor_speed = 250000
  55. #
  56. # ATmega1280
  57. #
  58. [env:megaatmega1280]
  59. platform = atmelavr
  60. framework = arduino
  61. board = megaatmega1280
  62. build_flags = ${common.build_flags}
  63. board_build.f_cpu = 16000000L
  64. lib_deps = ${common.lib_deps}
  65. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  66. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  67. monitor_speed = 250000
  68. #
  69. # AT90USB1286 boards using CDC bootloader
  70. # - BRAINWAVE
  71. # - BRAINWAVE_PRO
  72. # - SAV_MKI
  73. # - TEENSYLU
  74. #
  75. [env:at90usb1286_cdc]
  76. platform = teensy
  77. framework = arduino
  78. board = at90usb1286
  79. build_flags = ${common.build_flags}
  80. lib_deps = ${common.lib_deps}
  81. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  82. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  83. monitor_speed = 250000
  84. #
  85. # AT90USB1286 boards using DFU bootloader
  86. # - PrintrBoard
  87. # - PrintrBoard Rev.F
  88. # - ? 5DPRINT ?
  89. #
  90. [env:at90usb1286_dfu]
  91. platform = teensy
  92. framework = arduino
  93. board = at90usb1286
  94. build_flags = ${common.build_flags}
  95. lib_deps = ${common.lib_deps}
  96. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  97. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  98. monitor_speed = 250000
  99. #
  100. # Due (Atmel SAM3X8E ARM Cortex-M3)
  101. #
  102. # - RAMPS4DUE
  103. # - RADDS
  104. #
  105. [env:DUE]
  106. platform = atmelsam
  107. framework = arduino
  108. board = due
  109. build_flags = ${common.build_flags}
  110. lib_deps = ${common.lib_deps}
  111. src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
  112. monitor_speed = 250000
  113. [env:DUE_USB]
  114. platform = atmelsam
  115. framework = arduino
  116. board = dueUSB
  117. build_flags = ${common.build_flags}
  118. lib_deps = ${common.lib_deps}
  119. src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
  120. monitor_speed = 250000
  121. [env:DUE_debug]
  122. # Used when WATCHDOG_RESET_MANUAL is enabled
  123. platform = atmelsam
  124. framework = arduino
  125. board = due
  126. build_flags = ${common.build_flags}
  127. -funwind-tables
  128. -mpoke-function-name
  129. lib_deps = ${common.lib_deps}
  130. src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
  131. monitor_speed = 250000
  132. #
  133. # NXP LPC176x ARM Cortex-M3
  134. #
  135. [env:LPC1768]
  136. platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.0.zip
  137. framework = arduino
  138. board = nxp_lpc1768
  139. build_flags = -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
  140. # debug options for backtrace
  141. # -funwind-tables
  142. # -mpoke-function-name
  143. lib_ldf_mode = off
  144. lib_compat_mode = strict
  145. extra_scripts = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
  146. src_filter = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
  147. monitor_speed = 250000
  148. lib_deps = Servo
  149. LiquidCrystal
  150. U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
  151. TMCStepper=https://github.com/p3p/TMCStepper/archive/pr_lpctimingfix.zip
  152. Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/release.zip
  153. SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
  154. [env:LPC1769]
  155. platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.0.zip
  156. framework = arduino
  157. board = nxp_lpc1769
  158. build_flags = -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
  159. # debug options for backtrace
  160. # -funwind-tables
  161. # -mpoke-function-name
  162. lib_ldf_mode = off
  163. lib_compat_mode = strict
  164. extra_scripts = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
  165. src_filter = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
  166. monitor_speed = 250000
  167. lib_deps = Servo
  168. LiquidCrystal
  169. U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
  170. TMCStepper=https://github.com/p3p/TMCStepper/archive/pr_lpctimingfix.zip
  171. Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/release.zip
  172. #
  173. # Sanguinololu (ATmega644p)
  174. #
  175. [env:sanguino_atmega644p]
  176. platform = atmelavr
  177. framework = arduino
  178. board = sanguino_atmega644p
  179. build_flags = ${common.build_flags}
  180. lib_deps = ${common.lib_deps}
  181. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  182. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  183. monitor_speed = 250000
  184. #
  185. # Sanguinololu (ATmega1284p)
  186. #
  187. [env:sanguino_atmega1284p]
  188. platform = atmelavr
  189. framework = arduino
  190. board = sanguino_atmega1284p
  191. build_flags = ${common.build_flags}
  192. lib_deps = ${common.lib_deps}
  193. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  194. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  195. monitor_speed = 250000
  196. #
  197. # Melzi and clones (ATmega1284p)
  198. #
  199. [env:melzi]
  200. platform = atmelavr
  201. framework = arduino
  202. board = sanguino_atmega1284p
  203. build_flags = ${common.build_flags} -fmerge-all-constants
  204. upload_speed = 57600
  205. lib_deps = ${common.lib_deps}
  206. lib_ignore = TMCStepper
  207. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  208. monitor_speed = 250000
  209. #
  210. # Melzi and clones (Optiboot bootloader)
  211. #
  212. [env:melzi_optiboot]
  213. platform = atmelavr
  214. framework = arduino
  215. board = sanguino_atmega1284p
  216. build_flags = ${common.build_flags}
  217. upload_speed = 115200
  218. lib_deps = ${common.lib_deps}
  219. lib_ignore = TMCStepper
  220. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  221. monitor_speed = 250000
  222. #
  223. # RAMBo
  224. #
  225. [env:rambo]
  226. platform = atmelavr
  227. framework = arduino
  228. board = reprap_rambo
  229. build_flags = ${common.build_flags}
  230. board_build.f_cpu = 16000000L
  231. lib_deps = ${common.lib_deps}
  232. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  233. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  234. monitor_speed = 250000
  235. #
  236. # STM32F103RE
  237. #
  238. [env:STM32F103RE]
  239. platform = ststm32@5.6.0
  240. framework = arduino
  241. board = genericSTM32F103RE
  242. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  243. ${common.build_flags} -std=gnu++14
  244. -DDEBUG_LEVEL=0
  245. build_unflags = -std=gnu++11
  246. lib_deps = ${common.lib_deps}
  247. lib_ignore = Adafruit NeoPixel, SPI
  248. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  249. monitor_speed = 250000
  250. debug_tool = stlink
  251. upload_protocol = stlink
  252. #
  253. # STM32F103RC_fysetc
  254. #
  255. [env:STM32F103RC_fysetc]
  256. platform = ststm32@5.6.0
  257. framework = arduino
  258. board = genericSTM32F103RC
  259. #board_build.core = maple
  260. platform_packages = tool-stm32duino
  261. extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
  262. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  263. ${common.build_flags} -std=gnu++14
  264. -DDEBUG_LEVEL=0 -DHAVE_SW_SERIAL
  265. build_unflags = -std=gnu++11
  266. lib_deps = ${common.lib_deps}
  267. SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
  268. lib_ignore = Adafruit NeoPixel, SPI
  269. lib_ldf_mode = chain
  270. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  271. monitor_speed = 250000
  272. debug_tool = stlink
  273. upload_protocol = serial
  274. #
  275. # BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
  276. #
  277. [env:STM32F103RC_bigtree]
  278. platform = ststm32@5.6.0
  279. framework = arduino
  280. board = genericSTM32F103RC
  281. platform_packages = tool-stm32duino
  282. extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
  283. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  284. ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14
  285. build_unflags = -std=gnu++11
  286. lib_deps = ${common.lib_deps}
  287. lib_ignore = Adafruit NeoPixel, SPI
  288. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  289. monitor_speed = 115200
  290. [env:STM32F103RC_bigtree_USB]
  291. platform = ststm32@5.6.0
  292. framework = arduino
  293. board = genericSTM32F103RC
  294. platform_packages = tool-stm32duino
  295. extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
  296. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  297. ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14 -DUSE_USB_COMPOSITE
  298. build_unflags = -std=gnu++11
  299. lib_deps = ${common.lib_deps}
  300. lib_ignore = Adafruit NeoPixel, SPI
  301. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  302. monitor_speed = 115200
  303. #
  304. # STM32F4 with STM32GENERIC
  305. #
  306. [env:STM32F4]
  307. platform = ststm32
  308. framework = arduino
  309. board = disco_f407vg
  310. build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
  311. lib_deps = ${common.lib_deps}
  312. lib_ignore = Adafruit NeoPixel, TMCStepper
  313. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F7>
  314. monitor_speed = 250000
  315. #
  316. # STM32F7 with STM32GENERIC
  317. #
  318. [env:STM32F7]
  319. platform = ststm32
  320. framework = arduino
  321. board = remram_v1
  322. build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
  323. lib_deps = ${common.lib_deps}
  324. lib_ignore = Adafruit NeoPixel, TMCStepper
  325. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F4>
  326. monitor_speed = 250000
  327. #
  328. # ARMED (STM32)
  329. #
  330. [env:ARMED]
  331. platform = ststm32@5.6.0
  332. framework = arduino
  333. board = armed_v1
  334. build_flags = ${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
  335. lib_deps = ${common.lib_deps}
  336. lib_ignore = Adafruit NeoPixel
  337. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
  338. monitor_speed = 250000
  339. #
  340. # Longer 3D board in Alfawise U20 (STM32F103VET6)
  341. #
  342. [env:STM32F103VE_longer]
  343. platform = ststm32@5.6.0
  344. framework = arduino
  345. board = genericSTM32F103VE
  346. monitor_speed = 250000
  347. extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
  348. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  349. ${common.build_flags} -std=gnu++14 -USERIAL_USB
  350. -DSTM32F1xx -DU20 -DTS_V12
  351. build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  352. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  353. lib_deps = ${common.lib_deps}
  354. lib_ignore = Adafruit NeoPixel, LiquidTWI2, SPI
  355. #
  356. # MKS Robin (STM32F103ZET6)
  357. #
  358. [env:mks_robin]
  359. platform = ststm32@5.6.0
  360. framework = arduino
  361. board = genericSTM32F103ZE
  362. extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin.py
  363. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  364. ${common.build_flags} -std=gnu++14 -DSTM32_XL_DENSITY
  365. build_unflags = -std=gnu++11
  366. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  367. lib_deps = ${common.lib_deps}
  368. lib_ignore = Adafruit NeoPixel, SPI
  369. #
  370. # MKS ROBIN LITE/LITE2 (STM32F103RCT6)
  371. #
  372. [env:mks_robin_lite]
  373. platform = ststm32@5.6.0
  374. framework = arduino
  375. board = genericSTM32F103RC
  376. extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_lite.py
  377. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  378. ${common.build_flags} -std=gnu++14
  379. build_unflags = -std=gnu++11
  380. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  381. lib_deps = ${common.lib_deps}
  382. lib_ignore = Adafruit NeoPixel, SPI
  383. #
  384. # MKS Robin Mini (STM32F103VET6)
  385. #
  386. [env:mks_robin_mini]
  387. platform = ststm32@5.6.0
  388. framework = arduino
  389. board = genericSTM32F103VE
  390. extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_mini.py
  391. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  392. ${common.build_flags} -std=gnu++14
  393. build_unflags = -std=gnu++11
  394. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  395. lib_deps = ${common.lib_deps}
  396. lib_ignore = Adafruit NeoPixel, SPI
  397. #
  398. # MKS Robin Nano (STM32F103VET6)
  399. #
  400. [env:mks_robin_nano]
  401. platform = ststm32@5.6.0
  402. framework = arduino
  403. board = genericSTM32F103VE
  404. extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_nano.py
  405. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  406. ${common.build_flags} -std=gnu++14
  407. build_unflags = -std=gnu++11
  408. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  409. lib_deps = ${common.lib_deps}
  410. lib_ignore = Adafruit NeoPixel, SPI
  411. #
  412. # JGAurora A5S A1 (STM32F103ZET6)
  413. #
  414. [env:jgaurora_a5s_a1]
  415. platform = ststm32@5.6.0
  416. framework = arduino
  417. board = genericSTM32F103ZE
  418. extra_scripts = buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
  419. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  420. ${common.build_flags} -DSTM32F1xx -std=gnu++14 -DSTM32_XL_DENSITY
  421. build_unflags = -std=gnu++11
  422. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  423. lib_deps = ${common.lib_deps}
  424. lib_ignore = Adafruit NeoPixel, SPI
  425. monitor_speed = 250000
  426. #
  427. # STM32F407VET6 with RAMPS-like shield
  428. # 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
  429. # Shield - https://github.com/jmz52/Hardware
  430. #
  431. [env:STM32F407VE_black]
  432. platform = ststm32@5.4.3
  433. framework = arduino
  434. board = blackSTM32F407VET6
  435. extra_scripts = pre:buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py
  436. build_flags = ${common.build_flags}
  437. -DSTM32F4 -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\"
  438. lib_deps = ${common.lib_deps}
  439. lib_ignore = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
  440. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
  441. monitor_speed = 250000
  442. #
  443. # Bigtreetech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
  444. #
  445. [env:BIGTREE_SKR_PRO]
  446. platform = ststm32@5.6.0
  447. framework = arduino
  448. board = BigTree_SKR_Pro
  449. extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  450. build_flags = ${common.build_flags}
  451. -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\"
  452. -DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 -DHAVE_HWSERIAL6 -DSS_TIMER=4
  453. lib_deps =
  454. U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/bugfix.zip
  455. LiquidCrystal@1.3.4
  456. TMCStepper@>=0.5.2,<1.0.0
  457. Adafruit NeoPixel
  458. LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip
  459. Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip
  460. SoftwareSerialM=https://github.com/sjasonsmith/SoftwareSerialM/archive/SKR_PRO.zip
  461. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
  462. monitor_speed = 250000
  463. #
  464. # BIGTREE_SKR_BTT002 (STM32F407VET6 ARM Cortex-M4)
  465. #
  466. [env:BIGTREE_BTT002]
  467. platform = ststm32@5.6.0
  468. framework = arduino
  469. board = BigTree_Btt002
  470. extra_scripts = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  471. build_flags = ${common.build_flags}
  472. -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407VE\"
  473. -DTARGET_STM32F4 -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
  474. -DHAVE_HWSERIAL2
  475. -DHAVE_HWSERIAL3
  476. -DPIN_SERIAL2_RX=PD_6
  477. -DPIN_SERIAL2_TX=PD_5
  478. lib_deps = ${common.lib_deps}
  479. lib_ignore = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
  480. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
  481. monitor_speed = 250000
  482. #
  483. # Teensy 3.1 / 3.2 (ARM Cortex-M4)
  484. #
  485. [env:teensy31]
  486. platform = teensy
  487. framework = arduino
  488. board = teensy31
  489. build_flags = ${common.build_flags}
  490. lib_deps = ${common.lib_deps}
  491. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  492. lib_ignore = Adafruit NeoPixel
  493. src_filter = ${common.default_src_filter} +<src/HAL/HAL_TEENSY31_32>
  494. monitor_speed = 250000
  495. #
  496. # Malyan M200 (STM32F103CB)
  497. #
  498. [env:STM32F103CB_malyan]
  499. platform = ststm32@5.6.0
  500. framework = arduino
  501. board = malyanM200
  502. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
  503. -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
  504. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  505. lib_ignore = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL, SPI
  506. #
  507. # Chitu boards like Tronxy X5s (STM32F103ZET6)
  508. #
  509. [env:chitu_f103]
  510. platform = ststm32@5.6.0
  511. framework = arduino
  512. board = genericSTM32F103ZE
  513. extra_scripts = buildroot/share/PlatformIO/scripts/chitu_crypt.py
  514. build_flags = !python Marlin/src/HAL/HAL_STM32F1/build_flags.py
  515. ${common.build_flags} -DSTM32F1xx -std=gnu++14 -DSTM32_XL_DENSITY
  516. build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  517. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  518. lib_deps = ${common.lib_deps}
  519. lib_ignore = Adafruit NeoPixel
  520. #
  521. # Teensy 3.5 / 3.6 (ARM Cortex-M4)
  522. #
  523. [env:teensy35]
  524. platform = teensy
  525. framework = arduino
  526. board = teensy35
  527. build_flags = ${common.build_flags}
  528. lib_deps = ${common.lib_deps}
  529. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  530. lib_ignore = Adafruit NeoPixel
  531. src_filter = ${common.default_src_filter} +<src/HAL/HAL_TEENSY35_36>
  532. monitor_speed = 250000
  533. #
  534. # Espressif ESP32
  535. #
  536. [env:esp32]
  537. platform = espressif32
  538. board = esp32dev
  539. framework = arduino
  540. upload_speed = 115200
  541. monitor_speed = 115200
  542. upload_port = /dev/ttyUSB0
  543. lib_deps =
  544. AsyncTCP=https://github.com/me-no-dev/AsyncTCP/archive/master.zip
  545. ESPAsyncWebServer=https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip
  546. lib_ignore = LiquidCrystal, LiquidTWI2, SailfishLCD, SailfishRGB_LED
  547. src_filter = ${common.default_src_filter} +<src/HAL/HAL_ESP32>
  548. #
  549. # FYSETC F6 V1.3
  550. #
  551. [env:fysetc_f6_13]
  552. platform = atmelavr
  553. framework = arduino
  554. board = fysetc_f6_13
  555. build_flags = ${common.build_flags}
  556. board_build.f_cpu = 16000000L
  557. lib_deps = ${common.lib_deps}
  558. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  559. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  560. monitor_speed = 250000
  561. #
  562. # Native
  563. # No supported Arduino libraries, base Marlin only
  564. #
  565. [env:linux_native]
  566. platform = native
  567. build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined
  568. src_build_flags = -Wall -IMarlin/src/HAL/HAL_LINUX/include
  569. build_unflags = -Wall
  570. lib_ldf_mode = off
  571. lib_deps =
  572. extra_scripts =
  573. src_filter = ${common.default_src_filter} +<src/HAL/HAL_LINUX>
  574. #
  575. # Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4)
  576. #
  577. [env:SAMD51_grandcentral_m4]
  578. platform = atmelsam
  579. board = adafruit_grandcentral_m4
  580. framework = arduino
  581. build_flags = ${common.build_flags} -std=gnu++17
  582. extra_scripts = ${common.extra_scripts}
  583. build_unflags = -std=gnu++11
  584. lib_deps = ${common.lib_deps}
  585. src_filter = ${common.default_src_filter} +<src/HAL/HAL_SAMD51>
  586. debug_tool = jlink
  587. #
  588. # Just print the dependency tree
  589. #
  590. [env:include_tree]
  591. platform = atmelavr
  592. framework = arduino
  593. board = megaatmega2560
  594. build_flags = -c -H -std=gnu++11 -Wall -Os -D__MARLIN_FIRMWARE__
  595. lib_deps = ${common.lib_deps}
  596. TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  597. src_filter = +<src/Marlin.cpp>