123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- //
- // Prepare a list of protected pins for M42/M43
- //
-
- #if PIN_EXISTS(X_MIN)
- #define _X_MIN X_MIN_PIN,
- #else
- #define _X_MIN
- #endif
- #if PIN_EXISTS(X_MAX)
- #define _X_MAX X_MAX_PIN,
- #else
- #define _X_MAX
- #endif
- #if PIN_EXISTS(X_CS) && AXIS_HAS_SPI(X)
- #define _X_CS X_CS_PIN,
- #else
- #define _X_CS
- #endif
- #if PIN_EXISTS(X_MS1)
- #define _X_MS1 X_MS1_PIN,
- #else
- #define _X_MS1
- #endif
- #if PIN_EXISTS(X_MS2)
- #define _X_MS2 X_MS2_PIN,
- #else
- #define _X_MS2
- #endif
- #if PIN_EXISTS(X_MS3)
- #define _X_MS3 X_MS3_PIN,
- #else
- #define _X_MS3
- #endif
-
- #define _X_PINS X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, _X_MIN _X_MAX _X_MS1 _X_MS2 _X_MS3 _X_CS
-
- #if PIN_EXISTS(Y_MIN)
- #define _Y_MIN Y_MIN_PIN,
- #else
- #define _Y_MIN
- #endif
- #if PIN_EXISTS(Y_MAX)
- #define _Y_MAX Y_MAX_PIN,
- #else
- #define _Y_MAX
- #endif
- #if PIN_EXISTS(Y_CS) && AXIS_HAS_SPI(Y)
- #define _Y_CS Y_CS_PIN,
- #else
- #define _Y_CS
- #endif
- #if PIN_EXISTS(Y_MS1)
- #define _Y_MS1 Y_MS1_PIN,
- #else
- #define _Y_MS1
- #endif
- #if PIN_EXISTS(Y_MS2)
- #define _Y_MS2 Y_MS2_PIN,
- #else
- #define _Y_MS2
- #endif
- #if PIN_EXISTS(Y_MS3)
- #define _Y_MS3 Y_MS3_PIN,
- #else
- #define _Y_MS3
- #endif
-
- #define _Y_PINS Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, _Y_MIN _Y_MAX _Y_MS1 _Y_MS2 _Y_MS3 _Y_CS
-
- #if PIN_EXISTS(Z_MIN)
- #define _Z_MIN Z_MIN_PIN,
- #else
- #define _Z_MIN
- #endif
- #if PIN_EXISTS(Z_MAX)
- #define _Z_MAX Z_MAX_PIN,
- #else
- #define _Z_MAX
- #endif
- #if PIN_EXISTS(Z_CS) && AXIS_HAS_SPI(Z)
- #define _Z_CS Z_CS_PIN,
- #else
- #define _Z_CS
- #endif
- #if PIN_EXISTS(Z_MS1)
- #define _Z_MS1 Z_MS1_PIN,
- #else
- #define _Z_MS1
- #endif
- #if PIN_EXISTS(Z_MS2)
- #define _Z_MS2 Z_MS2_PIN,
- #else
- #define _Z_MS2
- #endif
- #if PIN_EXISTS(Z_MS3)
- #define _Z_MS3 Z_MS3_PIN,
- #else
- #define _Z_MS3
- #endif
-
- #define _Z_PINS Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, _Z_MIN _Z_MAX _Z_MS1 _Z_MS2 _Z_MS3 _Z_CS
-
- //
- // Extruder Chip Select, Digital Micro-steps
- //
-
- // Mixing stepper, Switching stepper, or regular stepper
- #define E_NEEDED(N) (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > N) \
- || (ENABLED(SWITCHING_EXTRUDER) && E_STEPPERS > N) \
- || (NONE(SWITCHING_EXTRUDER, MIXING_EXTRUDER) && EXTRUDERS > N)
-
- #define _E0_CS
- #define _E0_MS1
- #define _E0_MS2
- #define _E0_MS3
-
- #if E_NEEDED(0)
- #if PIN_EXISTS(E0_CS) && AXIS_HAS_SPI(E0)
- #undef _E0_CS
- #define _E0_CS E0_CS_PIN,
- #endif
- #if PIN_EXISTS(E0_MS1)
- #undef _E0_MS1
- #define _E0_MS1 E0_MS1_PIN,
- #endif
- #if PIN_EXISTS(E0_MS2)
- #undef _E0_MS2
- #define _E0_MS2 E0_MS2_PIN,
- #endif
- #if PIN_EXISTS(E0_MS3)
- #undef _E0_MS3
- #define _E0_MS3 E0_MS3_PIN,
- #endif
- #endif
-
- #define _E1_CS
- #define _E1_MS1
- #define _E1_MS2
- #define _E1_MS3
-
- #if E_NEEDED(1)
- #if PIN_EXISTS(E1_CS) && AXIS_HAS_SPI(E1)
- #undef _E1_CS
- #define _E1_CS E1_CS_PIN,
- #endif
- #if PIN_EXISTS(E1_MS1)
- #undef _E1_MS1
- #define _E1_MS1 E1_MS1_PIN,
- #endif
- #if PIN_EXISTS(E1_MS2)
- #undef _E1_MS2
- #define _E1_MS2 E1_MS2_PIN,
- #endif
- #if PIN_EXISTS(E1_MS3)
- #undef _E1_MS3
- #define _E1_MS3 E1_MS3_PIN,
- #endif
- #endif
-
- #define _E2_CS
- #define _E2_MS1
- #define _E2_MS2
- #define _E2_MS3
-
- #if E_NEEDED(2)
- #if PIN_EXISTS(E2_CS) && AXIS_HAS_SPI(E2)
- #undef _E2_CS
- #define _E2_CS E2_CS_PIN,
- #endif
- #if PIN_EXISTS(E2_MS1)
- #undef _E2_MS1
- #define _E2_MS1 E2_MS1_PIN,
- #endif
- #if PIN_EXISTS(E2_MS2)
- #undef _E2_MS2
- #define _E2_MS2 E2_MS2_PIN,
- #endif
- #if PIN_EXISTS(E2_MS3)
- #undef _E2_MS3
- #define _E2_MS3 E2_MS3_PIN,
- #endif
- #endif
-
- #define _E3_CS
- #define _E3_MS1
- #define _E3_MS2
- #define _E3_MS3
-
- #if E_NEEDED(3)
- #if PIN_EXISTS(E3_CS) && AXIS_HAS_SPI(E3)
- #undef _E3_CS
- #define _E3_CS E3_CS_PIN,
- #endif
- #if PIN_EXISTS(E3_MS1)
- #undef _E3_MS1
- #define _E3_MS1 E3_MS1_PIN,
- #endif
- #if PIN_EXISTS(E3_MS2)
- #undef _E3_MS2
- #define _E3_MS2 E3_MS2_PIN,
- #endif
- #if PIN_EXISTS(E3_MS3)
- #undef _E3_MS3
- #define _E3_MS3 E3_MS3_PIN,
- #endif
- #endif
-
- #define _E4_CS
- #define _E4_MS1
- #define _E4_MS2
- #define _E4_MS3
-
- #if E_NEEDED(4)
- #if PIN_EXISTS(E4_CS) && AXIS_HAS_SPI(E4)
- #undef _E4_CS
- #define _E4_CS E4_CS_PIN,
- #endif
- #if PIN_EXISTS(E4_MS1)
- #undef _E4_MS1
- #define _E4_MS1 E4_MS1_PIN,
- #endif
- #if PIN_EXISTS(E4_MS2)
- #undef _E4_MS2
- #define _E4_MS2 E4_MS2_PIN,
- #endif
- #if PIN_EXISTS(E4_MS3)
- #undef _E4_MS3
- #define _E4_MS3 E4_MS3_PIN,
- #endif
- #endif
-
- #define _E5_CS
- #define _E5_MS1
- #define _E5_MS2
- #define _E5_MS3
-
- #if E_NEEDED(5)
- #if PIN_EXISTS(E5_CS) && AXIS_HAS_SPI(E5)
- #undef _E5_CS
- #define _E5_CS E5_CS_PIN,
- #endif
- #if PIN_EXISTS(E5_MS1)
- #undef _E5_MS1
- #define _E5_MS1 E5_MS1_PIN,
- #endif
- #if PIN_EXISTS(E5_MS2)
- #undef _E5_MS2
- #define _E5_MS2 E5_MS2_PIN,
- #endif
- #if PIN_EXISTS(E5_MS3)
- #undef _E5_MS3
- #define _E5_MS3 E5_MS3_PIN,
- #endif
- #endif
-
- #define _E6_CS
- #define _E6_MS1
- #define _E6_MS2
- #define _E6_MS3
-
- #if E_NEEDED(6)
- #if PIN_EXISTS(E6_CS) && AXIS_HAS_SPI(E6)
- #undef _E6_CS
- #define _E6_CS E6_CS_PIN,
- #endif
- #if PIN_EXISTS(E6_MS2)
- #undef _E6_MS2
- #define _E6_MS2 E6_MS2_PIN,
- #endif
- #if PIN_EXISTS(E6_MS3)
- #undef _E6_MS3
- #define _E6_MS3 E6_MS3_PIN,
- #endif
- #if PIN_EXISTS(E6_MS4)
- #undef _E6_MS4
- #define _E6_MS4 E6_MS4_PIN,
- #endif
- #endif
-
- #define _E7_CS
- #define _E7_MS1
- #define _E7_MS2
- #define _E7_MS3
-
- #if E_NEEDED(7)
- #if PIN_EXISTS(E7_CS) && AXIS_HAS_SPI(E7)
- #undef _E7_CS
- #define _E7_CS E7_CS_PIN,
- #endif
- #if PIN_EXISTS(E7_MS3)
- #undef _E7_MS3
- #define _E7_MS3 E7_MS3_PIN,
- #endif
- #if PIN_EXISTS(E7_MS4)
- #undef _E7_MS4
- #define _E7_MS4 E7_MS4_PIN,
- #endif
- #if PIN_EXISTS(E7_MS5)
- #undef _E7_MS5
- #define _E7_MS5 E7_MS5_PIN,
- #endif
- #endif
-
- //
- // E Steppers
- //
-
- #define _E0_PINS
- #define _E1_PINS
- #define _E2_PINS
- #define _E3_PINS
- #define _E4_PINS
- #define _E5_PINS
- #define _E6_PINS
- #define _E7_PINS
-
- #if EXTRUDERS
- #undef _E0_PINS
- #define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, _E0_CS _E0_MS1 _E0_MS2 _E0_MS3
- #endif
-
- #if ENABLED(SWITCHING_EXTRUDER)
- // Tools 0 and 1 use E0
- #if EXTRUDERS > 2 // Tools 2 and 3 use E1
- #undef _E1_PINS
- #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, _E1_CS _E1_MS1 _E1_MS2 _E1_MS3
- #if EXTRUDERS > 4 // Tools 4 and 5 use E2
- #undef _E2_PINS
- #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, _E2_CS _E2_MS1 _E2_MS2 _E2_MS3
- #endif
- #endif
-
- #elif EITHER(HAS_MULTI_EXTRUDER, MIXING_EXTRUDER)
-
- #undef _E1_PINS
- #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, _E1_CS _E1_MS1 _E1_MS2 _E1_MS3
- #if EXTRUDERS > 2 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 2)
- #undef _E2_PINS
- #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, _E2_CS _E2_MS1 _E2_MS2 _E2_MS3
- #if EXTRUDERS > 3 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 3)
- #undef _E3_PINS
- #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, _E3_CS _E3_MS1 _E3_MS2 _E3_MS3
- #if EXTRUDERS > 4 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 4)
- #undef _E4_PINS
- #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, _E4_CS _E4_MS1 _E4_MS2 _E4_MS3
- #if EXTRUDERS > 5 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 5)
- #undef _E5_PINS
- #define _E5_PINS E5_STEP_PIN, E5_DIR_PIN, E5_ENABLE_PIN, _E5_CS _E5_MS1 _E5_MS2 _E5_MS3
- #if EXTRUDERS > 6 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 6)
- #undef _E6_PINS
- #define _E6_PINS E6_STEP_PIN, E6_DIR_PIN, E6_ENABLE_PIN, _E6_CS _E6_MS1 _E6_MS2 _E6_MS3
- #if EXTRUDERS > 7 || (ENABLED(MIXING_EXTRUDER) && MIXING_STEPPERS > 7)
- #undef _E7_PINS
- #define _E7_PINS E7_STEP_PIN, E7_DIR_PIN, E7_ENABLE_PIN, _E7_CS _E7_MS1 _E7_MS2 _E7_MS3
- #endif // EXTRUDERS > 7 || MIXING_EXTRUDER > 7
- #endif // EXTRUDERS > 6 || MIXING_EXTRUDER > 6
- #endif // EXTRUDERS > 5 || MIXING_EXTRUDER > 5
- #endif // EXTRUDERS > 4 || MIXING_EXTRUDER > 4
- #endif // EXTRUDERS > 3 || MIXING_EXTRUDER > 3
- #endif // EXTRUDERS > 2 || MIXING_EXTRUDER > 2
-
- #endif // HAS_MULTI_EXTRUDER || MIXING_EXTRUDER
-
- //
- // Heaters, Fans, Temp Sensors
- //
-
- #ifndef E0_AUTO_FAN_PIN
- #define E0_AUTO_FAN_PIN -1
- #endif
- #ifndef E1_AUTO_FAN_PIN
- #define E1_AUTO_FAN_PIN -1
- #endif
- #ifndef E2_AUTO_FAN_PIN
- #define E2_AUTO_FAN_PIN -1
- #endif
- #ifndef E3_AUTO_FAN_PIN
- #define E3_AUTO_FAN_PIN -1
- #endif
- #ifndef E4_AUTO_FAN_PIN
- #define E4_AUTO_FAN_PIN -1
- #endif
- #ifndef E5_AUTO_FAN_PIN
- #define E5_AUTO_FAN_PIN -1
- #endif
- #ifndef E6_AUTO_FAN_PIN
- #define E6_AUTO_FAN_PIN -1
- #endif
- #ifndef E7_AUTO_FAN_PIN
- #define E7_AUTO_FAN_PIN -1
- #endif
-
- #define _H0_PINS
- #define _H1_PINS
- #define _H2_PINS
- #define _H3_PINS
- #define _H4_PINS
- #define _H5_PINS
- #define _H6_PINS
- #define _H7_PINS
-
- #if HAS_HOTEND
- #undef _H0_PINS
- #define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_0_PIN),
- #if HAS_MULTI_HOTEND
- #undef _H1_PINS
- #define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_1_PIN),
- #if HOTENDS > 2
- #undef _H2_PINS
- #define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_2_PIN),
- #if HOTENDS > 3
- #undef _H3_PINS
- #define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_3_PIN),
- #if HOTENDS > 4
- #undef _H4_PINS
- #define _H4_PINS HEATER_4_PIN, E4_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_4_PIN),
- #if HOTENDS > 5
- #undef _H5_PINS
- #define _H5_PINS HEATER_5_PIN, E5_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_5_PIN),
- #if HOTENDS > 6
- #undef _H6_PINS
- #define _H6_PINS HEATER_6_PIN, E6_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_6_PIN),
- #if HOTENDS > 7
- #undef _H7_PINS
- #define _H7_PINS HEATER_7_PIN, E7_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_7_PIN),
- #endif // HOTENDS > 7
- #endif // HOTENDS > 6
- #endif // HOTENDS > 5
- #endif // HOTENDS > 4
- #endif // HOTENDS > 3
- #endif // HOTENDS > 2
- #endif // HAS_MULTI_HOTEND
- #endif // HOTENDS
-
- //
- // Dual X, Dual Y, Multi-Z
- // Chip Select and Digital Micro-stepping
- //
-
- #if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS)
- #if PIN_EXISTS(X2_CS) && AXIS_HAS_SPI(X2)
- #define _X2_CS X2_CS_PIN,
- #else
- #define _X2_CS
- #endif
- #if PIN_EXISTS(X2_MS1)
- #define _X2_MS1 X2_MS1_PIN,
- #else
- #define _X2_MS1
- #endif
- #if PIN_EXISTS(X2_MS2)
- #define _X2_MS2 X2_MS2_PIN,
- #else
- #define _X2_MS2
- #endif
- #if PIN_EXISTS(X2_MS3)
- #define _X2_MS3 X2_MS3_PIN,
- #else
- #define _X2_MS3
- #endif
- #define _X2_PINS X2_STEP_PIN, X2_DIR_PIN, X2_ENABLE_PIN, _X2_CS _X2_MS1 _X2_MS2 _X2_MS3
- #else
- #define _X2_PINS
- #endif
-
- #if ENABLED(Y_DUAL_STEPPER_DRIVERS)
- #if PIN_EXISTS(Y2_CS) && AXIS_HAS_SPI(Y2)
- #define _Y2_CS Y2_CS_PIN,
- #else
- #define _Y2_CS
- #endif
- #if PIN_EXISTS(Y2_MS1)
- #define _Y2_MS1 Y2_MS1_PIN,
- #else
- #define _Y2_MS1
- #endif
- #if PIN_EXISTS(Y2_MS2)
- #define _Y2_MS2 Y2_MS2_PIN,
- #else
- #define _Y2_MS2
- #endif
- #if PIN_EXISTS(Y2_MS3)
- #define _Y2_MS3 Y2_MS3_PIN,
- #else
- #define _Y2_MS3
- #endif
- #define _Y2_PINS Y2_STEP_PIN, Y2_DIR_PIN, Y2_ENABLE_PIN, _Y2_CS _Y2_MS1 _Y2_MS2 _Y2_MS3
- #else
- #define _Y2_PINS
- #endif
-
- #if NUM_Z_STEPPER_DRIVERS >= 2
- #if PIN_EXISTS(Z2_CS) && AXIS_HAS_SPI(Z2)
- #define _Z2_CS Z2_CS_PIN,
- #else
- #define _Z2_CS
- #endif
- #if PIN_EXISTS(Z2_MS1)
- #define _Z2_MS1 Z2_MS1_PIN,
- #else
- #define _Z2_MS1
- #endif
- #if PIN_EXISTS(Z2_MS2)
- #define _Z2_MS2 Z2_MS2_PIN,
- #else
- #define _Z2_MS2
- #endif
- #if PIN_EXISTS(Z2_MS3)
- #define _Z2_MS3 Z2_MS3_PIN,
- #else
- #define _Z2_MS3
- #endif
- #define _Z2_PINS Z2_STEP_PIN, Z2_DIR_PIN, Z2_ENABLE_PIN, _Z2_CS _Z2_MS1 _Z2_MS2 _Z2_MS3
- #else
- #define _Z2_PINS
- #endif
-
- #if NUM_Z_STEPPER_DRIVERS >= 3
- #if PIN_EXISTS(Z3_CS) && AXIS_HAS_SPI(Z3)
- #define _Z3_CS Z3_CS_PIN,
- #else
- #define _Z3_CS
- #endif
- #if PIN_EXISTS(Z3_MS1)
- #define _Z3_MS1 Z3_MS1_PIN,
- #else
- #define _Z3_MS1
- #endif
- #if PIN_EXISTS(Z3_MS2)
- #define _Z3_MS2 Z3_MS2_PIN,
- #else
- #define _Z3_MS2
- #endif
- #if PIN_EXISTS(Z3_MS3)
- #define _Z3_MS3 Z3_MS3_PIN,
- #else
- #define _Z3_MS3
- #endif
- #define _Z3_PINS Z3_STEP_PIN, Z3_DIR_PIN, Z3_ENABLE_PIN, _Z3_CS _Z3_MS1 _Z3_MS2 _Z3_MS3
- #else
- #define _Z3_PINS
- #endif
-
- #if NUM_Z_STEPPER_DRIVERS >= 4
- #if PIN_EXISTS(Z4_CS) && AXIS_HAS_SPI(Z4)
- #define _Z4_CS Z4_CS_PIN,
- #else
- #define _Z4_CS
- #endif
- #if PIN_EXISTS(Z4_MS1)
- #define _Z4_MS1 Z4_MS1_PIN,
- #else
- #define _Z4_MS1
- #endif
- #if PIN_EXISTS(Z4_MS2)
- #define _Z4_MS2 Z4_MS2_PIN,
- #else
- #define _Z4_MS2
- #endif
- #if PIN_EXISTS(Z4_MS3)
- #define _Z4_MS3 Z4_MS3_PIN,
- #else
- #define _Z4_MS3
- #endif
- #define _Z4_PINS Z4_STEP_PIN, Z4_DIR_PIN, Z4_ENABLE_PIN, _Z4_CS _Z4_MS1 _Z4_MS2 _Z4_MS3
- #else
- #define _Z4_PINS
- #endif
-
- //
- // Generate the final Sensitive Pins array,
- // keeping the array as small as possible.
- //
-
- #if PIN_EXISTS(PS_ON)
- #define _PS_ON PS_ON_PIN,
- #else
- #define _PS_ON
- #endif
-
- #if HAS_BED_PROBE && PIN_EXISTS(Z_MIN_PROBE)
- #define _Z_PROBE Z_MIN_PROBE_PIN,
- #else
- #define _Z_PROBE
- #endif
-
- #if PIN_EXISTS(FAN)
- #define _FAN0 FAN_PIN,
- #else
- #define _FAN0
- #endif
- #if PIN_EXISTS(FAN1)
- #define _FAN1 FAN1_PIN,
- #else
- #define _FAN1
- #endif
- #if PIN_EXISTS(FAN2)
- #define _FAN2 FAN2_PIN,
- #else
- #define _FAN2
- #endif
- #if PIN_EXISTS(FAN3)
- #define _FAN3 FAN3_PIN,
- #else
- #define _FAN3
- #endif
- #if PIN_EXISTS(FAN4)
- #define _FAN4 FAN4_PIN,
- #else
- #define _FAN4
- #endif
- #if PIN_EXISTS(FAN5)
- #define _FAN5 FAN5_PIN,
- #else
- #define _FAN5
- #endif
- #if PIN_EXISTS(FAN6)
- #define _FAN6 FAN6_PIN,
- #else
- #define _FAN6
- #endif
- #if PIN_EXISTS(FAN7)
- #define _FAN7 FAN7_PIN,
- #else
- #define _FAN7
- #endif
- #if PIN_EXISTS(CONTROLLER_FAN)
- #define _FANC CONTROLLER_FAN_PIN,
- #else
- #define _FANC
- #endif
-
- #if TEMP_SENSOR_BED && PINS_EXIST(TEMP_BED, HEATER_BED)
- #define _BED_PINS HEATER_BED_PIN, analogInputToDigitalPin(TEMP_BED_PIN),
- #else
- #define _BED_PINS
- #endif
-
- #if TEMP_SENSOR_CHAMBER && PIN_EXISTS(TEMP_CHAMBER)
- #define _CHAMBER_TEMP analogInputToDigitalPin(TEMP_CHAMBER_PIN),
- #else
- #define _CHAMBER_TEMP
- #endif
- #if TEMP_SENSOR_CHAMBER && PINS_EXIST(TEMP_CHAMBER, HEATER_CHAMBER)
- #define _CHAMBER_HEATER HEATER_CHAMBER_PIN,
- #else
- #define _CHAMBER_HEATER
- #endif
- #if TEMP_SENSOR_CHAMBER && PINS_EXIST(TEMP_CHAMBER, CHAMBER_AUTO_FAN)
- #define _CHAMBER_FAN CHAMBER_AUTO_FAN_PIN,
- #else
- #define _CHAMBER_FAN
- #endif
-
- #ifndef HAL_SENSITIVE_PINS
- #define HAL_SENSITIVE_PINS
- #endif
-
- #define SENSITIVE_PINS { \
- _X_PINS _Y_PINS _Z_PINS _X2_PINS _Y2_PINS _Z2_PINS _Z3_PINS _Z4_PINS _Z_PROBE \
- _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS _E5_PINS _E6_PINS _E7_PINS \
- _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS _H5_PINS _H6_PINS _H7_PINS \
- _PS_ON _FAN0 _FAN1 _FAN2 _FAN3 _FAN4 _FAN5 _FAN6 _FAN7 _FANC \
- _BED_PINS _CHAMBER_TEMP _CHAMBER_HEATER _CHAMBER_FAN HAL_SENSITIVE_PINS \
- }
|