123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- #ifndef __STM32F1__
- #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
- #endif
-
- #define DEFAULT_MACHINE_NAME "3D Printer"
-
- #define BOARD_NAME "FYSETC CHEETAH"
- #define BOARD_WEBSITE_URL "https://fysetc.com"
-
- // Ignore temp readings during develpment.
- #define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
-
- //
- // Servos
- //
- #define SERVO0_PIN PA0
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN PA1
- #define Y_STOP_PIN PB4
- #define Z_STOP_PIN PA15
-
- //
- // Filament runout
- //
- #define FIL_RUNOUT_PIN PB5
-
- //
- // Steppers
- //
- #define X_STEP_PIN PB8
- #define X_DIR_PIN PB9
- #define X_ENABLE_PIN PA8
-
- #define Y_STEP_PIN PB2
- #define Y_DIR_PIN PB3
- #define Y_ENABLE_PIN PB1
-
- #define Z_STEP_PIN PC0
- #define Z_DIR_PIN PC1
- #define Z_ENABLE_PIN PC2
-
- #define E0_STEP_PIN PC15
- #define E0_DIR_PIN PC14
- #define E0_ENABLE_PIN PC13
-
- #define X_HARDWARE_SERIAL MSerial2 // Port correct?
- #define Y_HARDWARE_SERIAL MSerial2
- #define Z_HARDWARE_SERIAL MSerial2
- #define E0_HARDWARE_SERIAL MSerial2
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PC6
- #define HEATER_BED_PIN PC7
- #ifndef FAN_PIN
- #define FAN_PIN PC8
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_BED_PIN PC5 // Analog Input
- #define TEMP_0_PIN PC4 // Analog Input
-
- //
- // Misc. Functions
- //
- #define SDSS PA4
-
- //
- // LCD Pins
- //
- #if HAS_SPI_LCD
-
- #define BEEPER_PIN PC9
-
- #if HAS_GRAPHICAL_LCD
- #define DOGLCD_A0 PB14
- #define DOGLCD_CS PB12
- #define DOGLCD_SCK PB13
- #define DOGLCD_MOSI PB15
- //#define LCD_SCREEN_ROT_90
- //#define LCD_SCREEN_ROT_180
- //#define LCD_SCREEN_ROT_270
-
- #if ENABLED(FYSETC_MINI_12864) || ENABLED(U8GLIB_ST7920)
- #define FORCE_SOFT_SPI
- #endif
- #endif
-
- #define LCD_PINS_RS PB12 // CS -- SOFT SPI for ENDER3 LCD
- #define LCD_PINS_D4 PB13 // SCLK
- #define LCD_PINS_ENABLE PB15 // DATA MOSI
-
- // not connected to a pin
- #define SD_DETECT_PIN PC3
-
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN PB0
- #endif
- #ifndef RGB_LED_G_PIN
- #define RGB_LED_G_PIN PB7
- #endif
- #ifndef RGB_LED_B_PIN
- #define RGB_LED_B_PIN PB6
- #endif
-
- //#define LCD_CONTRAST 190
-
- #if ENABLED(NEWPANEL)
- #define BTN_EN1 PC11
- #define BTN_EN2 PC10
- #define BTN_ENC PC12
- #endif
-
- #endif
|