marlin

Commit Graph

작성자	SHA1	메시지	날짜
Bernhard	4bababf5b0	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	13 년 전
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	13 년 전
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	13 년 전
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	13 년 전
Erik van der Zalm	617968ab76	G92 fix	13 년 전
Erik van der Zalm	84d9cf7339	merging	13 년 전
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	13 년 전
Bernhard	3320a5b37d	make autotemp compatile for use without pid	13 년 전
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	13 년 전
Bernhard	82c99625fa	instant stop of sd prints from the panel.	13 년 전
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	13 년 전
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	13 년 전
Bernhard	b1d84d879b	st_synchronize back to normal..	13 년 전
Bernhard Kubicek	f6fe7143e4	Merge pull request #29 from k-eex/Marlin_v1 Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	13 년 전
Bernhard	dde4b40fa9	disable steppers in runout prevention	13 년 전
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	13 년 전
Bernhard	aa4f9a6474	better values.	13 년 전
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	13 년 전
Bernhard	1ec0c3b68a	extruder runout prevention.	13 년 전
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	13 년 전
Bernhard	cc4a9cdb69	added autostart procedure trigger to the ultralcd menu	13 년 전
Bernhard	61c943b4bf	fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.	13 년 전
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	13 년 전
Bernhard	754d2d69b2	z homing sound fix, for now until the actual cause is found..	13 년 전
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	13 년 전
Bernhard	460b788d78	repaired homing position setting.	13 년 전
Erik van der Zalm	3664ed6aad	Merge branch 'Marlin_v1' of https://github.com/dob71/Marlin into Marlin_v1	13 년 전
Erik van der Zalm	43f5c3e82b	Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	13 년 전
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 년 전
Bernhard	12e8edcac3	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	13 년 전
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	13 년 전
Erik van der Zalm	89e832c295	Update endstops only for homing. (use less resources when not used)	13 년 전
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	13 년 전
Erik van der Zalm	95a0b28acb	Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1	13 년 전
Erik van der Zalm	af22e9cd38	Some advance modifications	13 년 전
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	13 년 전
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	13 년 전
Bernhard	4f909963e4	make QUICKHOME configureable	13 년 전
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) Advance (not tested)	13 년 전
Bernhard	0bc9daa4f7	make it compile with arduino 1.0 ; function is still untested.	13 년 전
Bernhard	b0c3871750	more fixing of the sanguino math round problem	13 년 전
Bernhard	9c57453168	removed stream.h referenece from marlinserial.	13 년 전
Bernhard	59205ac5fc	preliminiary implementation for the early heating finish. Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed. its kind of not so cool, because you need 6 more ints. Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways. Then it would be much easier. to have the offsets without additional variables.	13 년 전
Bernhard	7a4be21b4f	made it compile if arduino decides to include files in a differnt order. DEC HEX and stuff now defined in MarlinSerial.h	13 년 전
Bernhard	716e89b87c	first homing move diagonal towards home switches.	13 년 전
Bernhard	d00b7e5587	repaired compiliation in windows	13 년 전
Bernhard	e4ab0e5982	more inlines	13 년 전
Bernhard	8cb29921a0	possible stepper release after sd printing	13 년 전
Bernhard	044886b4a0	Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1	13 년 전
Bernhard	b19c8b74b9	force inline	13 년 전

처음 이전 1 2 3 4 다음 마지막

197 커밋 (4bababf5b0f339174c1b7f3b6fce14679e1a5e6d) All Branches 검색

197 커밋 (4bababf5b0f339174c1b7f3b6fce14679e1a5e6d)

All Branches