marlin

Commit Graph

Yazar	SHA1	Mesaj	Tarih
Christian Thalhammer	0e3631ff4b	smaller changes	12 yıl önce
Erik van der Zalm	7699f250e3	Fixed small merge bug	12 yıl önce
Erik van der Zalm	13e185d330	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	12 yıl önce
daid	2a77c84c8f	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	12 yıl önce
Erik van der Zalm	f87c80889f	Fixed M109 timer overflow (reported by triffid)	12 yıl önce
Erik van der Zalm	154de69c02	Print configuration.h version during startup (thanks hairykiwi)	12 yıl önce
Erik van der Zalm	598eb1d4f1	Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)	12 yıl önce
Erik van der Zalm	9173a5713b	Teensylu support.	12 yıl önce
Erik van der Zalm	5113513cb2	RC 1	12 yıl önce
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. One for common settings. One for advanced settings.	12 yıl önce
Christian Thalhammer	b5fae1104b	fixed sUICIDE_PIN disable	12 yıl önce
Erik van der Zalm	e45e5c68bb	Added support for Gen3+ (Pins file only) Added late z enable. (blddk request) Only calculate look ahead if >2 moves in buffer. Removed some FORCE_INLINE to save memory. Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	12 yıl önce
Michael Moon	3e575533c5	get M81 working	12 yıl önce
Michael Moon	2ae2ead97b	help residency not overflow	12 yıl önce
Michael Moon	8d0916af13	allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications	12 yıl önce
haxar	6cc6029d7a	M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print	12 yıl önce
Bernhard	157aa7f2fd	m115 eol fix	12 yıl önce
Bernhard	7aeb45303d	small mistake	12 yıl önce
Bernhard	cee5f9020a	added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.	12 yıl önce
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	12 yıl önce
Bernhard	3c1a4aac2b	header file simplification	12 yıl önce
Bernhard	212515148e	added m240 photography support. default off	12 yıl önce
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	12 yıl önce
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	12 yıl önce
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	12 yıl önce
Erik van der Zalm	617968ab76	G92 fix	12 yıl önce
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	12 yıl önce
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	12 yıl önce
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	12 yıl önce
Bernhard	dde4b40fa9	disable steppers in runout prevention	12 yıl önce
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	12 yıl önce
Bernhard	aa4f9a6474	better values.	12 yıl önce
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	12 yıl önce
Bernhard	1ec0c3b68a	extruder runout prevention.	12 yıl önce
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	12 yıl önce
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	12 yıl önce
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	12 yıl önce
Bernhard	460b788d78	repaired homing position setting.	12 yıl önce
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	12 yıl önce
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	12 yıl önce
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	12 yıl önce
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	12 yıl önce
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	12 yıl önce
Bernhard	4f909963e4	make QUICKHOME configureable	12 yıl önce
Bernhard	b0c3871750	more fixing of the sanguino math round problem	12 yıl önce
Bernhard	716e89b87c	first homing move diagonal towards home switches.	13 yıl önce
Bernhard	e4ab0e5982	more inlines	13 yıl önce
Bernhard	8cb29921a0	possible stepper release after sd printing	13 yıl önce
Erik van der Zalm	6d95644c0d	Moved M88 into M84. (M84 E)	13 yıl önce
Erik van der Zalm	7216a12856	Disabled M88 for boards that don't have seperate enable pins.	13 yıl önce

İlk Önceki 1 2 3 Sonraki Son

124 İşlemeler (6a3f8cf23f690618b4608f570a9ef24679220bed)