marlin

Commit Graph

Автор	SHA1	Съобщение	Дата
Scott Lahteine	a2a672449a	Updated boot screen description	преди 6 години
Scott Lahteine	4953fb1c88	Standardize encoder defaults	преди 6 години
Scott Lahteine	5684beae90	Bring some configs up to speed	преди 6 години
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786) From #7314 by @MrAmericanMike	преди 6 години
Scott Lahteine	b2cf253a13	Add RESTORE_LEVELING_AFTER_G28 option	преди 6 години
Marcio Teixeira	716a22498f	Changed temp type from uint8_t to int16_t - Also deleted old implementation files which had been renamed.	преди 6 години
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740)	преди 6 години
Marcio Teixeira	aada1e698f	Removed unused configuration options.	преди 6 години
Studiodyne	d3ca82d8c2	Support for multiple filament runout sensors	преди 6 години
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701) Implemented for LPC1768.	преди 6 години
Scott Lahteine	79272f98fc	Proposed changes to ST7920 lightweight status screen	преди 6 години
Marcio Teixeira	24eb275b99	Added a light-weight status screen for the ST7920 - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	преди 6 години
Scott Lahteine	08d685c97a	Followup to 21e60fd	преди 6 години
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661)	преди 6 години
Marcio Teixeira	4880ac6533	Added a light-weight status screen for the ST7920 - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	преди 6 години
Scott Lahteine	2ec65051fd	Fix serial comment sp.	преди 6 години
Scott Lahteine	2014d38e10	NEOPIXEL_BRIGHTNESS parity	преди 6 години
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503)	преди 6 години
Scott Lahteine	16739264d3	Add UltiController v2.1 support Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)	преди 6 години
Scott Lahteine	4925f60cff	Add MALYAN_LCD to configs	преди 6 години
Scott Lahteine	7d6c009104	Add thermistor 15 tuned for JGAurora A5	преди 6 години
Scott Lahteine	348b454401	Probe bounds based on bed size	преди 6 години
Scott Lahteine	58ed9901d7	Consistent NEOPIXEL_TYPE options	преди 6 години
Scott Lahteine	fa432508b0	Followup to Ender config	преди 6 години
Scott Lahteine	048486390e	Bring some configs up to date	преди 6 години
Thomas Moore	f7efac57b7	Multi-host support	преди 7 години
GMagician	5295b4713d	[2.0.x] add semitec 104NT-4 (#9119) Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	преди 6 години
Scott Lahteine	0b4a46fa6c	Bring configs up to date with 1.1.x	преди 6 години
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	преди 6 години
Scott Lahteine	28fc8741d6	Reduce default jerk. XY by half. Z by 1/4	преди 6 години
Even	ea1a8d1223	add original RADDS LCD + Controller adds setup for the original Radds Display+Controller+SD Card Reader PCB http://doku.radds.org/dokumentation/lcd-display/	преди 6 години
Dan Delaney	b055d8c39c	[2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814) * Adding support for using the MKS_12864OLED with the SSD1306 controller * Update comment for correct controller type	преди 6 години
Scott Lahteine	15d05748df	Adding support for the Tronxy and Zonestar LCD	преди 6 години
Scott Lahteine	69d49a2438	Shorter segments may be better	преди 7 години
Scott Lahteine	ae663a4198	PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING	преди 7 години
Richard Wackerbarth	c1184552ac	Change K1 to required option PID_K1	преди 7 години
Scott Lahteine	aa7efb96bf	Bring configurations up to date	преди 7 години
Scott Lahteine	0154e3480c	New feature: BED_SKEW_CORRECTION	преди 7 години
Scott Lahteine	ef2531558c	Add an option to segment leveled moves	преди 7 години
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	преди 7 години
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	преди 7 години
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	преди 7 години
Scott Lahteine	b76e173205	Move test extrusion options under G26	преди 7 години
Scott Lahteine	81b91b3f9d	Clean up some trailing white-space	преди 7 години
Roxy-3D	967104e1ce	Default Extrusion Settings were off a few lines in some of the example config files. (#8333)	преди 7 години
Roxy-3D	ed62c621d7	Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313) - Fix G26 Circle Drawing. - Add default extrusion settings so machine can print lines on print bed - Yet to be done: Get LCD Menu's to use these settings.	преди 7 години
Scott Lahteine	2c099fd4c2	Update Thermal Protection Documentation	преди 7 години
Scott Lahteine	93ba72ea83	Add SERIAL_PORT -1, set on SBASE, STM32F103RET6	преди 7 години
Scott Lahteine	7e43dd1d23	Fix probes configuration url Based on #8241 by @machaj	преди 7 години
android444	9cc1d8e312	[2.0.x] Support for SilverGate Board	преди 7 години

Първа Предишна 1 2 3 4 5 ... Следваща Последна

832 Ревизии (6b4a9281456175e98ff54be2a0fe6c0ad592b928)