marlin

Commit-Graf

Upphovsman	SHA1	Meddelande	Datum
Scott Lahteine	72c15a5cc9	Add --no-track to mfnew git script	6 år sedan
Scott Lahteine	dca69efc11	Update Bed PID comments	6 år sedan
Scott Lahteine	56486c5c0e	Apply const to manage_inactivity	6 år sedan
Scott Lahteine	a6485456df	Fix LIGHTWEIGHT_UI with UBL See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702	6 år sedan
Scott Lahteine	e02fc4f1d6	Better RESTORE_LEVELING_AFTER_G28 sanity-check As suggested by @GMagician	6 år sedan
Scott Lahteine	44a697ab04	Set STM32F1 TEMP_TIMER_FREQUENCY to 1K Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803	6 år sedan
Scott Lahteine	cec6e19099	Add RepRapPro Huxley configuration Based on #10343 by @indazoo	6 år sedan
Scott Lahteine	9ff4e9e1e6	Patch _IS_HW_SPI so defined() works	6 år sedan
Scott Lahteine	cea398849e	Tweak to gcode_line_error/return	6 år sedan
Scott Lahteine	4382f2124d	Merge pull request #10337 from ejtagle/bugfix-2.0.x [2.0.x] 6th-order jerk-controlled motion planning in real-time	6 år sedan
etagle	a29adde5c0	Implement BEZIER_JERK_CONTROL Enable 6th-order jerk-controlled motion planning in real-time. Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)	6 år sedan
Scott Lahteine	5932df7ea1	Add BEZIER_JERK_CONTROL to example configs	6 år sedan
Scott Lahteine	93524c1994	Merge pull request #10045 from Lenbok/2.0.x-monitor_chamber_temperature_and_auto_fan [2.0.x] Monitor chamber temperature, with auto fan control.	6 år sedan
Lenbok	0e8242180d	Chamber temperature monitoring and auto fan control. This is an initial cut for feedback, updated for 2.0.x. Chamber temperature is currently reported along with hot end and bed temperatures to serial. The format is just like that used for hot end and bed temperatures, but using 'C' prefix. As there is no heater, target is always 0. Is this appropriate, is there a better way to report chamber temperatures? Chamber temperatures are not reported on the LCD in any way. When auto chamber fan is enabled, it currently just uses the same temperature threshold as the other auto controlled fans. As the chamber temperature is not connected to any heater, it doesn't undergo mintemp/maxtemp monitoring. This would need to change in the future if chamber heating became a feature.	6 år sedan
Scott Lahteine	5b3bda1c16	Add Chamber Temp options to example configs	6 år sedan
Bob-the-Kuhn	acda4ecb20	Fix DUE Trinamic SW/HW SPI sanity check (#10336)	6 år sedan
Bob-the-Kuhn	ab715c70d1	TMC SPI sanity-check and pins debugging (#10324)	6 år sedan
Scott Lahteine	4dc7e64789	Update Slovak language Based on #10313 by @rmoravcik	6 år sedan
Scott Lahteine	0dccf9ea6a	Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130 [2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro	6 år sedan
Marcio Teixeira	2efc072fdb	Clear progress bar on completion (#10333) Fix #10330	6 år sedan
GMagician	6ce060cfe0	[2.0.x] Update language_it.h (#10322) Updated to #10296	6 år sedan
Marcio Teixeira	9356cf648f	Added support for Einsy Retro http://reprap.org/wiki/EinsyRetro	6 år sedan
Marcio Teixeira	75037493fa	Default active low for TMC2130 DIAG1 (#10294) - Added sanity check to inform users to set the endstop to inverting when using SENSORLESS_HOMING	6 år sedan
Scott Lahteine	e8e60263c8	Scale feedrate (mm/s to deg/s) for SCARA	6 år sedan
Scott Lahteine	051303ad42	Russian language updates From #10311 by @anton-piliugin	6 år sedan
Scott Lahteine	386bc71d57	Merge pull request #10173 from noingwhat/2.0.x-Continuous-Purge [2.0.x] Continuous Purge	6 år sedan
Sean	2fa0a73c2c	Implement filament change continuous purge	6 år sedan
Scott Lahteine	d133ad61f3	Add continuous purge to example configs	6 år sedan
Scott Lahteine	4b25543633	Backtrace formatting cleanup	6 år sedan
Bob-the-Kuhn	902c885782	Switch to TMC2130 compatible hardware SPI & misc (#10299)	6 år sedan
Scott Lahteine	1c36606886	Fix MSG_HEATING_FAILED_LCD_BED macro evaluation	6 år sedan
Scott Lahteine	fe91514395	MBL should add z_offset regardless of fade (#10308)	6 år sedan
Marcio Teixeira	8bc93c6f2b	Improve heating/cooling LCD messages (#10293)	6 år sedan
GMagician	21a47b50f4	Additional tool-change fixes (#10304) Followup to #10257	6 år sedan
Scott Lahteine	e6042a7c52	Tweak platformio debug_server options	6 år sedan
Scott Lahteine	f68b4265a6	Fix a probe pin definition	6 år sedan
Yunhui Fu	a019eebdd6	support utf8 unicode for test language (#10220)	6 år sedan
Scott Lahteine	656219d867	Add configs for Creality CR-8	6 år sedan
Karl Andersson	7cbbc2af7a	[2.0.x] Optional heater signal inversion (#10260)	6 år sedan
Marcio Teixeira	4d1a61335c	[2.0.x] Fixed Makefile for Marlin 2.0 (#10255) (#10281) * Fixed Makefile for Marlin 2.0 (#10255) - Makefile now supports the new Marlin 2.0 directory hierarchy. - RELOC_WORKAROUND is now automatically enabled based on avr-gcc version. * Makefile support for U8glib and TMC2130Stepper - Updated paths for oliver's U8glib 1.19.1 - Added option for teemuatlut's TMC2130Stepper 2.2.1	6 år sedan
Scott Lahteine	241996d5d6	Merge pull request #10257 from thinkyhead/bf2_tool_change_debug	6 år sedan
Scott Lahteine	4c79dc1093	Fix a Serial+EEPROM compile error Fixes #10278	6 år sedan
Scott Lahteine	93305a2d5e	Fix some spellings	6 år sedan
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	6 år sedan
Scott Lahteine	e3bbd70664	Merge pull request #10276 from thinkyhead/bf2_ender_4_cr_8 [2.0.x] Fix Ender 4 compilation, add more AVRs to Makefile	6 år sedan
Scott Lahteine	4f0eafce8f	Add more AVR boards to Makefile	6 år sedan
Scott Lahteine	4a23069de9	Fix Ender 4 / CR-8 compilation - Assign 243 (like EFB) as Ender-4/CR-8 board ID - Add to `Makefile` - Add to `pins.h`	6 år sedan
Scott Lahteine	02f0f95d40	Handle disabled HYBRID_THRESHOLD in EEPROM (#10275)	6 år sedan
Scott Lahteine	9ec2c03c5b	Fix likely error in retract/recover Addressing #10200	6 år sedan
Scott Lahteine	49f384a2ab	Note about MKS_MINI_12864 in sanitycheck	6 år sedan