marlin

Wykres commitów

Autor	SHA1	Wiadomość	Data
Marcio Teixeira	9356cf648f	Added support for Einsy Retro http://reprap.org/wiki/EinsyRetro	6 lat temu
Marcio Teixeira	75037493fa	Default active low for TMC2130 DIAG1 (#10294) - Added sanity check to inform users to set the endstop to inverting when using SENSORLESS_HOMING	6 lat temu
Scott Lahteine	e8e60263c8	Scale feedrate (mm/s to deg/s) for SCARA	6 lat temu
Scott Lahteine	051303ad42	Russian language updates From #10311 by @anton-piliugin	6 lat temu
Scott Lahteine	386bc71d57	Merge pull request #10173 from noingwhat/2.0.x-Continuous-Purge [2.0.x] Continuous Purge	6 lat temu
Sean	2fa0a73c2c	Implement filament change continuous purge	6 lat temu
Scott Lahteine	d133ad61f3	Add continuous purge to example configs	6 lat temu
Scott Lahteine	4b25543633	Backtrace formatting cleanup	6 lat temu
Bob-the-Kuhn	902c885782	Switch to TMC2130 compatible hardware SPI & misc (#10299)	6 lat temu
Scott Lahteine	1c36606886	Fix MSG_HEATING_FAILED_LCD_BED macro evaluation	6 lat temu
Scott Lahteine	fe91514395	MBL should add z_offset regardless of fade (#10308)	6 lat temu
Marcio Teixeira	8bc93c6f2b	Improve heating/cooling LCD messages (#10293)	6 lat temu
GMagician	21a47b50f4	Additional tool-change fixes (#10304) Followup to #10257	6 lat temu
Scott Lahteine	e6042a7c52	Tweak platformio debug_server options	6 lat temu
Scott Lahteine	f68b4265a6	Fix a probe pin definition	6 lat temu
Yunhui Fu	a019eebdd6	support utf8 unicode for test language (#10220)	6 lat temu
Scott Lahteine	656219d867	Add configs for Creality CR-8	6 lat temu
Karl Andersson	7cbbc2af7a	[2.0.x] Optional heater signal inversion (#10260)	6 lat temu
Marcio Teixeira	4d1a61335c	[2.0.x] Fixed Makefile for Marlin 2.0 (#10255) (#10281) * Fixed Makefile for Marlin 2.0 (#10255) - Makefile now supports the new Marlin 2.0 directory hierarchy. - RELOC_WORKAROUND is now automatically enabled based on avr-gcc version. * Makefile support for U8glib and TMC2130Stepper - Updated paths for oliver's U8glib 1.19.1 - Added option for teemuatlut's TMC2130Stepper 2.2.1	6 lat temu
Scott Lahteine	241996d5d6	Merge pull request #10257 from thinkyhead/bf2_tool_change_debug	6 lat temu
Scott Lahteine	4c79dc1093	Fix a Serial+EEPROM compile error Fixes #10278	6 lat temu
Scott Lahteine	93305a2d5e	Fix some spellings	6 lat temu
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	6 lat temu
Scott Lahteine	e3bbd70664	Merge pull request #10276 from thinkyhead/bf2_ender_4_cr_8 [2.0.x] Fix Ender 4 compilation, add more AVRs to Makefile	6 lat temu
Scott Lahteine	4f0eafce8f	Add more AVR boards to Makefile	6 lat temu
Scott Lahteine	4a23069de9	Fix Ender 4 / CR-8 compilation - Assign 243 (like EFB) as Ender-4/CR-8 board ID - Add to `Makefile` - Add to `pins.h`	6 lat temu
Scott Lahteine	02f0f95d40	Handle disabled HYBRID_THRESHOLD in EEPROM (#10275)	6 lat temu
Scott Lahteine	9ec2c03c5b	Fix likely error in retract/recover Addressing #10200	6 lat temu
Scott Lahteine	49f384a2ab	Note about MKS_MINI_12864 in sanitycheck	6 lat temu
Scott Lahteine	2672120a97	Do a small raise for all move-back	6 lat temu
Scott Lahteine	5acccbacc1	Simplified leveling-based tool change	6 lat temu
Scott Lahteine	1a75165f35	For set_z_fade_height use set_bed_leveling_enabled	6 lat temu
Scott Lahteine	d1734a089a	Split up tool_change for some setups	6 lat temu
Scott Lahteine	a9f94f260a	Some RADDS pin updates	6 lat temu
Scott Lahteine	31df43212c	Use lcd_printPGM_utf in more places Fix #10256	6 lat temu
Scott Lahteine	7d8a46519f	Output ABC for delta stepper counts	6 lat temu
Scott Lahteine	6098efcc59	Use float62 for LCD edit of Z Fade	6 lat temu
Scott Lahteine	f6d13e2295	Allow Z_SAFE_HOMING sanity checks to handle floats	6 lat temu
Scott Lahteine	889fd5f71f	Backtrace minor cleanup	6 lat temu
Scott Lahteine	53f0c7522a	Symmetrical FWRETRACT Z Hop Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.	6 lat temu
Scott Lahteine	ac7e97f4fe	Change order of inactive stepper disable/enable This ensures that steppers that share an enable pin will only be disabled for a miniscule time.	6 lat temu
Scott Lahteine	55e9b85ad6	Clear the "Wait for user" message set by M0/M1 See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936	6 lat temu
Scott Lahteine	b6a55f0891	Temporary workaround for tool-change compile error Pending a more complete solution to tool-change Z deviation.	6 lat temu
Scott Lahteine	b852781eba	Fix BLTOUCH compile error Followup to #10250	6 lat temu
AnHardt	c1f58a238d	No delay in sensorless quick homing (#10254)	6 lat temu
Scott Lahteine	1be955e52a	Alert users about low Z jerk values	6 lat temu
Scott Lahteine	9e4c037cef	Wait before turning off PRINTER_EVENT_LEDS at print end (#10248)	6 lat temu
Scott Lahteine	568ae094f4	Merge pull request #10250 from thinkyhead/bf2_homing_move_adjustments [2.0.x] Improvements to general and delta homing	6 lat temu
Scott Lahteine	8b7381b626	Clear sensorless homing in home_delta after first move-to-top	6 lat temu
Scott Lahteine	dbe2b6f7b0	Do moves towards endstops differently in do_homing_move	6 lat temu