marlin

Commit Graph

작성자	SHA1	메시지	날짜
Christian Thalhammer	0e3631ff4b	smaller changes	12 년 전
Erik van der Zalm	7699f250e3	Fixed small merge bug	12 년 전
Erik van der Zalm	13e185d330	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	12 년 전
daid	2a77c84c8f	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	12 년 전
Erik van der Zalm	f87c80889f	Fixed M109 timer overflow (reported by triffid)	12 년 전
Erik van der Zalm	154de69c02	Print configuration.h version during startup (thanks hairykiwi)	12 년 전
Erik van der Zalm	598eb1d4f1	Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)	12 년 전
Erik van der Zalm	9173a5713b	Teensylu support.	12 년 전
Erik van der Zalm	5113513cb2	RC 1	12 년 전
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. One for common settings. One for advanced settings.	12 년 전
Christian Thalhammer	b5fae1104b	fixed sUICIDE_PIN disable	12 년 전
Erik van der Zalm	e45e5c68bb	Added support for Gen3+ (Pins file only) Added late z enable. (blddk request) Only calculate look ahead if >2 moves in buffer. Removed some FORCE_INLINE to save memory. Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	12 년 전
Michael Moon	3e575533c5	get M81 working	12 년 전
Michael Moon	2ae2ead97b	help residency not overflow	12 년 전
Michael Moon	8d0916af13	allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications	12 년 전
haxar	6cc6029d7a	M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print	12 년 전
Bernhard	157aa7f2fd	m115 eol fix	12 년 전
Bernhard	7aeb45303d	small mistake	12 년 전
Bernhard	cee5f9020a	added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.	12 년 전
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	12 년 전
Bernhard	3c1a4aac2b	header file simplification	12 년 전
Bernhard	212515148e	added m240 photography support. default off	12 년 전
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	12 년 전
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	12 년 전
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	12 년 전
Erik van der Zalm	617968ab76	G92 fix	12 년 전
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	12 년 전
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	12 년 전
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	12 년 전
Bernhard	dde4b40fa9	disable steppers in runout prevention	12 년 전
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	12 년 전
Bernhard	aa4f9a6474	better values.	12 년 전
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	12 년 전
Bernhard	1ec0c3b68a	extruder runout prevention.	12 년 전
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	12 년 전
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	12 년 전
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	12 년 전
Bernhard	460b788d78	repaired homing position setting.	12 년 전
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	12 년 전
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	12 년 전
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	12 년 전
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	12 년 전
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	12 년 전
Bernhard	4f909963e4	make QUICKHOME configureable	12 년 전
Bernhard	b0c3871750	more fixing of the sanguino math round problem	12 년 전
Bernhard	716e89b87c	first homing move diagonal towards home switches.	13 년 전
Bernhard	e4ab0e5982	more inlines	13 년 전
Bernhard	8cb29921a0	possible stepper release after sd printing	13 년 전
Erik van der Zalm	6d95644c0d	Moved M88 into M84. (M84 E)	13 년 전
Erik van der Zalm	7216a12856	Disabled M88 for boards that don't have seperate enable pins.	13 년 전

처음 이전 1 2 3 다음 마지막

124 커밋 (b3fb09a20cc3d01bec34a137b323f16e5bd5fe3f)