marlin

提交图

作者	SHA1	备注	提交日期
Christian Thalhammer	e661578c84	support for GEN7 1.1,1.2 and 1.3	12 年前
Christian Thalhammer	0e3631ff4b	smaller changes	12 年前
Erik van der Zalm	fa2e1be0ca	changed default EXTRUDE_MINTEMP to 170.	12 年前
Erik van der Zalm	154de69c02	Print configuration.h version during startup (thanks hairykiwi)	12 年前
Erik van der Zalm	9173a5713b	Teensylu support.	12 年前
Erik van der Zalm	bdb70c0509	Warning for 10k thermistor	12 年前
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. One for common settings. One for advanced settings.	12 年前
Erik van der Zalm	f9c5333f97	Made "stop heating wait" optional. Default off.	12 年前
Christian Thalhammer	13e2ad2831	- added info for using GEN7 configuration	12 年前
Erik van der Zalm	9f139d6e0e	Added MAX6675 support. (Thanks to gregfrost) Needs some work to remove the blocking in read max6675.	12 年前
Erik van der Zalm	e45e5c68bb	Added support for Gen3+ (Pins file only) Added late z enable. (blddk request) Only calculate look ahead if >2 moves in buffer. Removed some FORCE_INLINE to save memory. Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	12 年前
Michael Moon	ab01658fd2	local configuration stuff- WATCHPERIOD causes breakage, disable. few other misc changes	12 年前
Michael Moon	71dc82e0b4	my local configuration	12 年前
Bernhard	212515148e	added m240 photography support. default off	13 年前
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	13 年前
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	13 年前
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	13 年前
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	13 年前
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	13 年前
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	13 年前
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	13 年前
Bernhard	aa4f9a6474	better values.	13 年前
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	13 年前
Bernhard	1ec0c3b68a	extruder runout prevention.	13 年前
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	13 年前
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 年前
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	13 年前
Erik van der Zalm	af22e9cd38	Some advance modifications	13 年前
Bernhard	4f909963e4	make QUICKHOME configureable	13 年前
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) Advance (not tested)	13 年前
Bernhard	59205ac5fc	preliminiary implementation for the early heating finish. Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed. its kind of not so cool, because you need 6 more ints. Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways. Then it would be much easier. to have the offsets without additional variables.	13 年前
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	13 年前
Erik van der Zalm	aad4b75b94	First parts 2nd extruder	13 年前
Bernhard	a0dc66f7bf	Home retract distance configureable per axis.	13 年前
Bernhard	6d6f323535	make an option if sd-card stop should release the steppers.	13 年前
Bernhard	74d0032e25	cooldown blocking selectable by #define.	13 年前
Erik van der Zalm	c0f8c9fd72	Seperate ENDSTOP_INVERTING for X Y and Z Added simple endstop filter. Corrected M114 count display.	13 年前
Erik van der Zalm	2e43f9c809	Changed min max temperature code.	13 年前
Bernhard Kubicek	8a1e719a3f	overworked config file	13 年前
Bernhard Kubicek	f52e1a9571	autotemp working, default=disabled.	13 年前
Bernhard Kubicek	70650c331d	corrected the ultimaker default values, the previous had a calculation error: see: http://groups.google.com/group/ultimaker/browse_thread/thread/9190678863	13 年前
Bernhard Kubicek	edb5ea7efa	the normal config again..	13 年前
Bernhard Kubicek	64f2121ab1	updated to sdfatlib2010902	13 年前
Erik van der Zalm	b15902d3b5	Fixed bug in configuration.h	13 年前
Erik van der Zalm	e7dca8614b	Advance experiments. Not working yet.	13 年前
Bernhard Kubicek	a9c7da06e3	and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h	13 年前
Bernhard Kubicek	7919a40d06	watchdog,percent done,	13 年前
Erik van der Zalm	805d37f77b	Fixed some small planner bugs	13 年前
Erik van der Zalm	5fd41ae872	Some fixes in planner	13 年前
Erik van der Zalm	95126c09c0	Added slowdown	13 年前

75 次代码提交 (e661578c84052d2fce063a6774a784bd76d627f9)