| .. |
|
Gen7
|
Fix cast warning in Gen7
|
12 роки тому |
|
Sanguino
|
Fixed compiler warning for Sanguino compile
|
12 роки тому |
|
hardware/tools/avr/etc
|
ATMega1284P support for Arduino IDE replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
|
12 роки тому |
|
.gitignore
|
Add suitable .gitignore to avoid build noise
|
12 роки тому |
|
COPYING
|
first commit
|
13 роки тому |
|
Configuration.h
|
Fixed soft limits when the origin is in the middle. HOME_POS is now always where the endstop is and can be outside the limits. The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH. The Z is axis now homed first if direction is away from the bed.
|
12 роки тому |
|
Configuration_adv.h
|
Support step motor controllers with active low step pins.
|
12 роки тому |
|
EEPROMwrite.h
|
__ header file replace
|
12 роки тому |
|
Makefile
|
Fix Makefile
|
12 роки тому |
|
Marlin.h
|
__ header file replace
|
12 роки тому |
|
Marlin.pde
|
Fixed soft limits when the origin is in the middle. HOME_POS is now always where the endstop is and can be outside the limits. The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH. The Z is axis now homed first if direction is away from the bed.
|
12 роки тому |
|
MarlinSerial.cpp
|
Teensylu support.
|
12 роки тому |
|
MarlinSerial.h
|
Teensylu support.
|
12 роки тому |
|
Sd2Card.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
Sd2Card.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
Sd2PinMap.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdBaseFile.cpp
|
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
|
12 роки тому |
|
SdBaseFile.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdFatConfig.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdFatStructs.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdFatUtil.cpp
|
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
|
12 роки тому |
|
SdFatUtil.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdFile.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdFile.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdInfo.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdVolume.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
SdVolume.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 роки тому |
|
cardreader.cpp
|
made prepare->autostart independent of current folder.
|
12 роки тому |
|
cardreader.h
|
__ header file replace
|
12 роки тому |
|
createTemperatureLookup.py
|
first commit
|
13 роки тому |
|
create_speed_lookuptable.py
|
Added 20MHz support.
|
12 роки тому |
|
fastio.h
|
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
|
12 роки тому |
|
language.h
|
added firmware retract. disabled by default
|
12 роки тому |
|
motion_control.cpp
|
Fixed typo in arc
|
12 роки тому |
|
motion_control.h
|
Removed interrupt nesting in the stepper ISR.
|
13 роки тому |
|
pins.h
|
Fixed soft limits when the origin is in the middle. HOME_POS is now always where the endstop is and can be outside the limits. The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH. The Z is axis now homed first if direction is away from the bed.
|
12 роки тому |
|
planner.cpp
|
Fixed AD595 define
|
12 роки тому |
|
planner.h
|
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
|
12 роки тому |
|
speed_lookuptable.h
|
Added 20MHz support.
|
12 роки тому |
|
stepper.cpp
|
Fixed typo
|
12 роки тому |
|
stepper.h
|
merging
|
13 роки тому |
|
temperature.cpp
|
Limit PID autotune PWM to PID_MAX
|
12 роки тому |
|
temperature.h
|
Added support for 2nd extruder temperature to UltraLCD
|
12 роки тому |
|
thermistortables.h
|
Merge pull request #170 from linagee/Marlin_v1
|
12 роки тому |
|
ultralcd.h
|
__ header file replace
|
12 роки тому |
|
ultralcd.pde
|
Fixed AD595 define
|
12 роки тому |
|
watchdog.h
|
__ header file replace
|
12 роки тому |
|
watchdog.pde
|
simplified the includes, makefile now works with arduino23
|
13 роки тому |
|
wiring.h
|
add wiring.h, that can be used to overwrite: arduino-0023/hardware/arduino/cores/arduino/wiring.h this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
|
13 роки тому |
Chris Palmer
538189cc19
Fixed soft limits when the origin is in the middle.