Apply composite tests

Marlin/src/HAL/AVR/MarlinSerial.h

     static constexpr bool XONOFF            = false;
     static constexpr bool EMERGENCYPARSER   = false;
     static constexpr bool DROPPED_RX        = false;
-    static constexpr bool RX_OVERRUNS       = HAS_DGUS_LCD && ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    static constexpr bool RX_OVERRUNS       = BOTH(HAS_DGUS_LCD, DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
   };

Marlin/src/HAL/AVR/inc/SanityCheck.h

 /**
  * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
  */
-#if HAS_TRINAMIC_CONFIG && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
   #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif
 
-#if HAS_TMC_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
+#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
   #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
 #endif

Marlin/src/HAL/LINUX/spi_pins.h

 #include "../../core/macros.h"
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD && ENABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(HAS_GRAPHICAL_LCD, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use

Marlin/src/HAL/LPC1768/spi_pins.h

 
 #include "../../core/macros.h"
 
-#if ENABLED(SDSUPPORT) && HAS_GRAPHICAL_LCD && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(SDSUPPORT, HAS_GRAPHICAL_LCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use

Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp

 
 #include "../../../inc/MarlinConfig.h"
 
-#if HAS_GRAPHICAL_LCD && ENABLED(FORCE_SOFT_SPI)
+#if BOTH(HAS_GRAPHICAL_LCD, FORCE_SOFT_SPI)
 
 #include "../HAL.h"
 #include <U8glib.h>

Marlin/src/HAL/shared/HAL_ST7920.h

  * (bypassing U8G), it will allow the LIGHTWEIGHT_UI to operate.
  */
 
-#if HAS_GRAPHICAL_LCD && ENABLED(LIGHTWEIGHT_UI)
+#if BOTH(HAS_GRAPHICAL_LCD, LIGHTWEIGHT_UI)
   void ST7920_cs();
   void ST7920_ncs();
   void ST7920_set_cmd();

Marlin/src/MarlinCore.cpp

         if (ENABLED(DISABLE_INACTIVE_Y)) DISABLE_AXIS_Y();
         if (ENABLED(DISABLE_INACTIVE_Z)) DISABLE_AXIS_Z();
         if (ENABLED(DISABLE_INACTIVE_E)) disable_e_steppers();
-        #if HAS_LCD_MENU && ENABLED(AUTO_BED_LEVELING_UBL)
+        #if BOTH(HAS_LCD_MENU, AUTO_BED_LEVELING_UBL)
           if (ubl.lcd_map_control) {
             ubl.lcd_map_control = false;
             ui.defer_status_screen(false);
   SETUP_RUN(ui.init());
   SETUP_RUN(ui.reset_status());       // Load welcome message early. (Retained if no errors exist.)
 
-  #if HAS_SPI_LCD && ENABLED(SHOW_BOOTSCREEN)
+  #if BOTH(HAS_SPI_LCD, SHOW_BOOTSCREEN)
     SETUP_RUN(ui.show_bootscreen());
   #endif
 

Marlin/src/feature/host_actions.cpp

         switch (response) {
 
           case 0: // "Purge More" button
-            #if HAS_LCD_MENU && ENABLED(ADVANCED_PAUSE_FEATURE)
+            #if BOTH(HAS_LCD_MENU, ADVANCED_PAUSE_FEATURE)
               pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE;  // Simulate menu selection (menu exits, doesn't extrude more)
             #endif
             filament_load_host_prompt();                          // Initiate another host prompt. (NOTE: The loop in load_filament may also do this!)
             break;
 
           case 1: // "Continue" / "Disable Runout" button
-            #if HAS_LCD_MENU && ENABLED(ADVANCED_PAUSE_FEATURE)
+            #if BOTH(HAS_LCD_MENU, ADVANCED_PAUSE_FEATURE)
               pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT;  // Simulate menu selection
             #endif
             #if HAS_FILAMENT_SENSOR

Marlin/src/feature/mmu2/mmu2.cpp

 millis_t MMU2::last_request, MMU2::next_P0_request;
 char MMU2::rx_buffer[MMU_RX_SIZE], MMU2::tx_buffer[MMU_TX_SIZE];
 
-#if HAS_LCD_MENU && ENABLED(MMU2_MENUS)
+#if BOTH(HAS_LCD_MENU, MMU2_MENUS)
 
   struct E_Step {
     float extrude;        //!< extrude distance in mm
   planner.synchronize();
 }
 
-#if HAS_LCD_MENU && ENABLED(MMU2_MENUS)
+#if BOTH(HAS_LCD_MENU, MMU2_MENUS)
 
   // Load filament into MMU2
   void MMU2::load_filament(uint8_t index) {

Marlin/src/feature/mmu2/mmu2.h

   static uint8_t get_current_tool();
   static void set_filament_type(uint8_t index, uint8_t type);
 
-  #if HAS_LCD_MENU && ENABLED(MMU2_MENUS)
+  #if BOTH(HAS_LCD_MENU, MMU2_MENUS)
     static bool unload();
     static void load_filament(uint8_t);
     static void load_all();
   static bool get_response();
   static void manage_response(const bool move_axes, const bool turn_off_nozzle);
 
-  #if HAS_LCD_MENU && ENABLED(MMU2_MENUS)
+  #if BOTH(HAS_LCD_MENU, MMU2_MENUS)
     static void load_to_nozzle();
     static void filament_ramming();
     static void execute_extruder_sequence(const E_Step * sequence, int steps);

Marlin/src/gcode/bedlevel/abl/G29.cpp

     ABL_VAR int abl_probe_index;
   #endif
 
-  #if HAS_SOFTWARE_ENDSTOPS && ENABLED(PROBE_MANUALLY)
+  #if BOTH(HAS_SOFTWARE_ENDSTOPS, PROBE_MANUALLY)
     ABL_VAR bool saved_soft_endstops_state = true;
   #endif
 

Marlin/src/gcode/calibrate/G34_M422.cpp

     // Restore the active tool after homing
     TERN_(HAS_MULTI_HOTEND, tool_change(old_tool_index, DISABLED(PARKING_EXTRUDER))); // Fetch previous tool for parking extruder
 
-    #if HAS_LEVELING && ENABLED(RESTORE_LEVELING_AFTER_G34)
+    #if BOTH(HAS_LEVELING, RESTORE_LEVELING_AFTER_G34)
       set_bed_leveling_enabled(leveling_was_active);
     #endif
 

Marlin/src/gcode/control/M17_M18_M84.cpp

     else
       planner.finish_and_disable();
 
-    #if HAS_LCD_MENU && ENABLED(AUTO_BED_LEVELING_UBL)
+    #if BOTH(HAS_LCD_MENU, AUTO_BED_LEVELING_UBL)
       if (ubl.lcd_map_control) {
         ubl.lcd_map_control = false;
         ui.defer_status_screen(false);

Marlin/src/gcode/feature/digipot/M907-M910.cpp

 
 #include "../../../inc/MarlinConfig.h"
 
-#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || HAS_I2C_DIGIPOT || ENABLED(DAC_STEPPER_CURRENT)
+#if ANY(HAS_DIGIPOTSS, HAS_MOTOR_CURRENT_PWM, HAS_I2C_DIGIPOT, DAC_STEPPER_CURRENT)
 
 #include "../../gcode.h"
 
   #endif
 }
 
-#if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
+#if EITHER(HAS_DIGIPOTSS, DAC_STEPPER_CURRENT)
 
   /**
    * M908: Control digital trimpot directly (M908 P<pin> S<current>)

Marlin/src/gcode/gcode.cpp

   | (ar_init.e ? _BV(REL_E) : 0)
 );
 
-#if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE)
+#if EITHER(HAS_AUTO_REPORTING, HOST_KEEPALIVE_FEATURE)
   bool GcodeSuite::autoreport_paused; // = false
 #endif
 
  * When G29_RETRY_AND_RECOVER is enabled, call G29() in
  * a loop with recovery and retry handling.
  */
-#if HAS_LEVELING && ENABLED(G29_RETRY_AND_RECOVER)
+#if BOTH(HAS_LEVELING, G29_RETRY_AND_RECOVER)
 
   #ifndef G29_MAX_RETRIES
     #define G29_MAX_RETRIES 0
         case 191: M191(); break;                                  // M191: Wait for chamber temperature to reach target
       #endif
 
-      #if ENABLED(AUTO_REPORT_TEMPERATURES) && HAS_TEMP_SENSOR
+      #if BOTH(AUTO_REPORT_TEMPERATURES, HAS_TEMP_SENSOR)
         case 155: M155(); break;                                  // M155: Set temperature auto-report interval
       #endif
 
         case 900: M900(); break;                                  // M900: Set advance K factor.
       #endif
 
-      #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || HAS_I2C_DIGIPOT || ENABLED(DAC_STEPPER_CURRENT)
+      #if ANY(HAS_DIGIPOTSS, HAS_MOTOR_CURRENT_PWM, HAS_I2C_DIGIPOT, DAC_STEPPER_CURRENT)
         case 907: M907(); break;                                  // M907: Set digital trimpot motor current using axis codes.
-        #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
+        #if EITHER(HAS_DIGIPOTSS, DAC_STEPPER_CURRENT)
           case 908: M908(); break;                                // M908: Control digital trimpot directly.
           #if ENABLED(DAC_STEPPER_CURRENT)
             case 909: M909(); break;                              // M909: Print digipot/DAC current value

Marlin/src/gcode/gcode.h

     process_subcommands_now_P(G28_STR);
   }
 
-  #if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE)
+  #if EITHER(HAS_AUTO_REPORTING, HOST_KEEPALIVE_FEATURE)
     static bool autoreport_paused;
     static inline bool set_autoreport_paused(const bool p) {
       const bool was = autoreport_paused;
 
   TERN_(HAS_COLOR_LEDS, static void M150());
 
-  #if ENABLED(AUTO_REPORT_TEMPERATURES) && HAS_TEMP_SENSOR
+  #if BOTH(AUTO_REPORT_TEMPERATURES, HAS_TEMP_SENSOR)
     static void M155();
   #endif
 
     static void M918();
   #endif
 
-  #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || HAS_I2C_DIGIPOT || ENABLED(DAC_STEPPER_CURRENT)
+  #if ANY(HAS_DIGIPOTSS, HAS_MOTOR_CURRENT_PWM, HAS_I2C_DIGIPOT, DAC_STEPPER_CURRENT)
     static void M907();
-    #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
+    #if EITHER(HAS_DIGIPOTSS, DAC_STEPPER_CURRENT)
       static void M908();
       #if ENABLED(DAC_STEPPER_CURRENT)
         static void M909();

Marlin/src/gcode/temp/M155.cpp

 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(AUTO_REPORT_TEMPERATURES) && HAS_TEMP_SENSOR
+#if BOTH(AUTO_REPORT_TEMPERATURES, HAS_TEMP_SENSOR)
 
 #include "../gcode.h"
 #include "../../module/temperature.h"

Marlin/src/inc/Conditionals_post.h

 #endif
 
 // Linear advance uses Jerk since E is an isolated axis
-#if HAS_JUNCTION_DEVIATION && ENABLED(LIN_ADVANCE)
+#if BOTH(HAS_JUNCTION_DEVIATION, LIN_ADVANCE)
   #define HAS_LINEAR_E_JERK 1
 #endif
 
   #define HAS_TEMP_ADC_CHAMBER 1
 #endif
 
-#if HOTENDS && (HAS_TEMP_ADC_0 || ENABLED(HEATER_0_USES_MAX6675))
+#if HOTENDS && EITHER(HAS_TEMP_ADC_0, HEATER_0_USES_MAX6675)
   #define HAS_TEMP_HOTEND 1
 #endif
 #define HAS_TEMP_BED        HAS_TEMP_ADC_BED
 #endif
 
 // Thermal protection
-#if HAS_HEATED_BED && ENABLED(THERMAL_PROTECTION_BED)
+#if BOTH(HAS_HEATED_BED, THERMAL_PROTECTION_BED)
   #define HAS_THERMALLY_PROTECTED_BED 1
 #endif
 #if ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0
 #if HAS_THERMALLY_PROTECTED_BED && WATCH_BED_TEMP_PERIOD > 0
   #define WATCH_BED 1
 #endif
-#if HAS_HEATED_CHAMBER && ENABLED(THERMAL_PROTECTION_CHAMBER) && WATCH_CHAMBER_TEMP_PERIOD > 0
+#if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER) && WATCH_CHAMBER_TEMP_PERIOD > 0
   #define WATCH_CHAMBER 1
 #endif
 #if  (ENABLED(THERMAL_PROTECTION_HOTENDS) || !EXTRUDERS) \
  * Bed Probe dependencies
  */
 #if HAS_BED_PROBE
-  #if ENABLED(ENDSTOPPULLUPS) && HAS_Z_MIN_PROBE_PIN
+  #if BOTH(ENDSTOPPULLUPS, HAS_Z_MIN_PROBE_PIN)
     #define ENDSTOPPULLUP_ZMIN_PROBE
   #endif
   #ifndef Z_PROBE_OFFSET_RANGE_MIN

Marlin/src/inc/SanityCheck.h

   #elif PROGRESS_MSG_EXPIRE < 0
     #error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0."
   #endif
-#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && !HAS_GRAPHICAL_LCD && DISABLED(EXTENSIBLE_UI)
+#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_GRAPHICAL_LCD, EXTENSIBLE_UI)
   #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Graphical LCD, or EXTENSIBLE_UI."
 #endif
 
 /**
  * Custom Boot and Status screens
  */
-#if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && !(HAS_GRAPHICAL_LCD || ENABLED(TOUCH_UI_FTDI_EVE))
+#if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && NONE(HAS_GRAPHICAL_LCD, TOUCH_UI_FTDI_EVE)
   #error "SHOW_CUSTOM_BOOTSCREEN requires Graphical LCD or TOUCH_UI_FTDI_EVE."
 #elif ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) && !HAS_GRAPHICAL_LCD
   #error "CUSTOM_STATUS_SCREEN_IMAGE requires a Graphical LCD."
   #error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL."
 #endif
 
-#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !(ENABLED(AUTO_BED_LEVELING_UBL) && HAS_GRAPHICAL_LCD)
+#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_GRAPHICAL_LCD)
   #error "MESH_EDIT_GFX_OVERLAY requires AUTO_BED_LEVELING_UBL and a Graphical LCD."
 #endif
 
   #error "MAX6675_SS_PIN (required for TEMP_SENSOR_0) not defined for this board."
 #elif HOTENDS && !HAS_TEMP_HOTEND
   #error "TEMP_0_PIN (required for TEMP_SENSOR_0) not defined for this board."
-#elif (HAS_MULTI_HOTEND || ENABLED(HEATERS_PARALLEL)) && !HAS_HEATER_1
+#elif EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) && !HAS_HEATER_1
   #error "HEATER_1_PIN not defined for this board."
 #endif
 

Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp

 
   #endif // LCD_PROGRESS_BAR
 
-  #if ENABLED(SDSUPPORT) && HAS_LCD_MENU
+  #if BOTH(SDSUPPORT, HAS_LCD_MENU)
 
     // CHARSET_MENU
     const static PROGMEM byte refresh[8] = {
       #endif
         {
           createChar_P(LCD_STR_UPLEVEL[0], uplevel);
-          #if ENABLED(SDSUPPORT) && HAS_LCD_MENU
+          #if BOTH(SDSUPPORT, HAS_LCD_MENU)
             // SD Card sub-menu special characters
             createChar_P(LCD_STR_REFRESH[0], refresh);
             createChar_P(LCD_STR_FOLDER[0], folder);

Marlin/src/lcd/dogm/dogm_Statusscreen.h

 // Can also be overridden in Configuration_adv.h
 // If you can afford it, try the 3-frame fan animation!
 // Don't compile in the fan animation with no fan
-#if !HAS_FAN0 || (HOTENDS == 5 || (HOTENDS == 4 && BED_OR_CHAMBER) || (ENABLED(STATUS_COMBINE_HEATERS) && HAS_HEATED_CHAMBER))
+#if !HAS_FAN0 || (HOTENDS == 5 || (HOTENDS == 4 && BED_OR_CHAMBER) || BOTH(STATUS_COMBINE_HEATERS, HAS_HEATED_CHAMBER))
   #undef STATUS_FAN_FRAMES
 #elif !STATUS_FAN_FRAMES
   #define STATUS_FAN_FRAMES 2
         ((STATUS_CHAMBER_WIDTH || STATUS_FAN_WIDTH  ||  STATUS_BED_WIDTH) && STATUS_HOTEND_BITMAPS == 4)
     #define STATUS_HEATERS_X 5
   #else
-    #if ENABLED(STATUS_COMBINE_HEATERS) && HAS_HEATED_BED && HOTENDS <= 4
+    #if BOTH(STATUS_COMBINE_HEATERS, HAS_HEATED_BED) && HOTENDS <= 4
       #define STATUS_HEATERS_X 5
     #else
       #define STATUS_HEATERS_X 8 // Like the included bitmaps
 #if HOTENDS && ENABLED(STATUS_HOTEND_ANIM)
   #define ANIM_HOTEND 1
 #endif
-#if DO_DRAW_BED && ENABLED(STATUS_BED_ANIM)
+#if BOTH(DO_DRAW_BED, STATUS_BED_ANIM)
   #define ANIM_BED 1
 #endif
-#if DO_DRAW_CHAMBER && ENABLED(STATUS_CHAMBER_ANIM)
+#if BOTH(DO_DRAW_CHAMBER, STATUS_CHAMBER_ANIM)
   #define ANIM_CHAMBER 1
 #endif
-#if DO_DRAW_CUTTER && ENABLED(STATUS_CUTTER_ANIM)
+#if BOTH(DO_DRAW_CUTTER, STATUS_CUTTER_ANIM)
   #define ANIM_CUTTER 1
 #endif
 #if ANIM_HOTEND || ANIM_BED || ANIM_CHAMBER || ANIM_CUTTER

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

     #elif ANIM_HOTEND && DISABLED(STATUS_HOTEND_INVERTED) && ENABLED(STATUS_HOTEND_NUMBERLESS)
       #define OFF_BMP(N) status_hotend_a_bmp
       #define ON_BMP(N)  status_hotend_b_bmp
-    #elif ANIM_HOTEND && ENABLED(STATUS_HOTEND_INVERTED)
+    #elif BOTH(ANIM_HOTEND, STATUS_HOTEND_INVERTED)
       #define OFF_BMP(N) status_hotend##N##_b_bmp
       #define ON_BMP(N)  status_hotend##N##_a_bmp
     #else

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp

   }
 
     #ifdef TOUCH_UI_PORTRAIT
-      #if HAS_CASE_LIGHT || ENABLED(SENSORLESS_HOMING)
+      #if EITHER(HAS_CASE_LIGHT, SENSORLESS_HOMING)
         #define GRID_ROWS 9
       #else
         #define GRID_ROWS 8
       #define BACKLASH_POS            BTN_POS(2,7), BTN_SIZE(1,1)
       #define CASE_LIGHT_POS          BTN_POS(1,8), BTN_SIZE(1,1)
       #define TMC_HOMING_THRS_POS     BTN_POS(2,8), BTN_SIZE(1,1)
-      #if HAS_CASE_LIGHT || ENABLED(SENSORLESS_HOMING)
+      #if EITHER(HAS_CASE_LIGHT, SENSORLESS_HOMING)
         #define BACK_POS              BTN_POS(1,9), BTN_SIZE(2,1)
       #else
         #define BACK_POS              BTN_POS(1,8), BTN_SIZE(2,1)

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.cpp

 
 #include "../config.h"
 
-#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_MESH
+#if BOTH(TOUCH_UI_FTDI_EVE, HAS_MESH)
 
 #include "screens.h"
 #include "screen_data.h"
   BedMeshScreen::onMeshUpdate(x, y, 0);
 }
 
-#endif // TOUCH_UI_FTDI_EVE
+#endif // TOUCH_UI_FTDI_EVE && HAS_MESH

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/junction_deviation_screen.cpp

 
 #include "../config.h"
 
-#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_JUNCTION_DEVIATION
+#if BOTH(TOUCH_UI_FTDI_EVE, HAS_JUNCTION_DEVIATION)
 
 #include "screens.h"
 

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp

     case 4:  GOTO_SCREEN(MoveAxisScreen);                             break;
     case 5:  injectCommands_P(PSTR("M84"));                           break;
     case 6:  GOTO_SCREEN(TemperatureScreen);                          break;
-    #if ENABLED(TOUCH_UI_COCOA_PRESS) && HAS_CASE_LIGHT
+    #if BOTH(TOUCH_UI_COCOA_PRESS, HAS_CASE_LIGHT)
     case 7:  GOTO_SCREEN(CaseLightScreen);                            break;
     #else
     case 7:  GOTO_SCREEN(ChangeFilamentScreen);                       break;

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/nozzle_offsets_screen.cpp

 
 #include "../config.h"
 
-#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_MULTI_HOTEND
+#if BOTH(TOUCH_UI_FTDI_EVE, HAS_MULTI_HOTEND)
 
 #include "screens.h"
 

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_bump_sensitivity_screen.cpp

 
 #include "../config.h"
 
-#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_TRINAMIC_CONFIG
+#if BOTH(TOUCH_UI_FTDI_EVE, HAS_TRINAMIC_CONFIG)
 
 #include "screens.h"
 

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp

 
 #include "../config.h"
 
-#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_TRINAMIC_CONFIG
+#if BOTH(TOUCH_UI_FTDI_EVE, HAS_TRINAMIC_CONFIG)
 
 #include "screens.h"
 

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/z_offset_screen.cpp

 
 #include "../config.h"
 
-#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_BED_PROBE
+#if BOTH(TOUCH_UI_FTDI_EVE, HAS_BED_PROBE)
 
 #include "screens.h"
 

Marlin/src/lcd/menu/menu_advanced.cpp

 
 #if HAS_HOTEND
   DEFINE_PIDTEMP_FUNCS(0);
-  #if HAS_MULTI_HOTEND && ENABLED(PID_PARAMS_PER_HOTEND)
+  #if BOTH(HAS_MULTI_HOTEND, PID_PARAMS_PER_HOTEND)
     REPEAT_S(1, HOTENDS, DEFINE_PIDTEMP_FUNCS)
   #endif
 #endif
 
-#define SHOW_MENU_ADVANCED_TEMPERATURE ((ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND) || EITHER(PID_AUTOTUNE_MENU, PID_EDIT_MENU))
+#if BOTH(AUTOTEMP, HAS_TEMP_HOTEND) || EITHER(PID_AUTOTUNE_MENU, PID_EDIT_MENU)
+  #define SHOW_MENU_ADVANCED_TEMPERATURE 1
+#endif
 
 //
 // Advanced Settings > Temperature
     //
     // Autotemp, Min, Max, Fact
     //
-    #if ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND
+    #if BOTH(AUTOTEMP, HAS_TEMP_HOTEND)
       EDIT_ITEM(bool, MSG_AUTOTEMP, &planner.autotemp_enabled);
       EDIT_ITEM(float3, MSG_MIN, &planner.autotemp_min, 0, float(HEATER_0_MAXTEMP) - 15);
       EDIT_ITEM(float3, MSG_MAX, &planner.autotemp_max, 0, float(HEATER_0_MAXTEMP) - 15);
     #endif
 
     PID_EDIT_MENU_ITEMS(0);
-    #if HAS_MULTI_HOTEND && ENABLED(PID_PARAMS_PER_HOTEND)
+    #if BOTH(HAS_MULTI_HOTEND, PID_PARAMS_PER_HOTEND)
       REPEAT_S(1, HOTENDS, PID_EDIT_MENU_ITEMS)
     #endif
 

Marlin/src/lcd/menu/menu_backlash.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(BACKLASH_GCODE)
+#if BOTH(HAS_LCD_MENU, BACKLASH_GCODE)
 
 #include "menu.h"
 

Marlin/src/lcd/menu/menu_bed_corners.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(LEVEL_BED_CORNERS)
+#if BOTH(HAS_LCD_MENU, LEVEL_BED_CORNERS)
 
 #include "menu.h"
 #include "../../module/motion.h"

Marlin/src/lcd/menu/menu_cancelobject.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(CANCEL_OBJECTS)
+#if BOTH(HAS_LCD_MENU, CANCEL_OBJECTS)
 
 #include "menu.h"
 #include "menu_addon.h"

Marlin/src/lcd/menu/menu_custom.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(CUSTOM_USER_MENUS)
+#if BOTH(HAS_LCD_MENU, CUSTOM_USER_MENUS)
 
 #include "menu.h"
 #include "../../gcode/queue.h"
 
 void _lcd_user_gcode(PGM_P const cmd) {
   queue.inject_P(cmd);
-  #if ENABLED(USER_SCRIPT_AUDIBLE_FEEDBACK) && HAS_BUZZER
-    ui.completion_feedback();
-  #endif
+  TERN_(USER_SCRIPT_AUDIBLE_FEEDBACK, ui.completion_feedback());
   TERN_(USER_SCRIPT_RETURN, ui.return_to_status());
 }
 

Marlin/src/lcd/menu/menu_filament.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(ADVANCED_PAUSE_FEATURE)
+#if BOTH(HAS_LCD_MENU, ADVANCED_PAUSE_FEATURE)
 
 #include "menu.h"
 #include "../../module/temperature.h"

Marlin/src/lcd/menu/menu_info.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(LCD_INFO_MENU)
+#if BOTH(HAS_LCD_MENU, LCD_INFO_MENU)
 
 #include "menu.h"
 

Marlin/src/lcd/menu/menu_job_recovery.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(POWER_LOSS_RECOVERY)
+#if BOTH(HAS_LCD_MENU, POWER_LOSS_RECOVERY)
 
 #include "menu.h"
 #include "../../gcode/queue.h"

Marlin/src/lcd/menu/menu_led.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(LED_CONTROL_MENU)
+#if BOTH(HAS_LCD_MENU, LED_CONTROL_MENU)
 
 #include "menu.h"
 #include "../../feature/leds/leds.h"

Marlin/src/lcd/menu/menu_main.cpp

       GCODES_ITEM(MSG_SWITCH_PS_ON, PSTR("M80"));
   #endif
 
-  #if HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)
+  #if BOTH(HAS_ENCODER_WHEEL, SDSUPPORT)
 
     // *** IF THIS SECTION IS CHANGED, REPRODUCE ABOVE ***
 

Marlin/src/lcd/menu/menu_media.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(SDSUPPORT)
+#if BOTH(HAS_LCD_MENU, SDSUPPORT)
 
 #include "menu.h"
 #include "../../sd/cardreader.h"

Marlin/src/lcd/menu/menu_mixer.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(MIXING_EXTRUDER)
+#if BOTH(HAS_LCD_MENU, MIXING_EXTRUDER)
 
 #include "menu.h"
 #include "menu_addon.h"

Marlin/src/lcd/menu/menu_mmu2.cpp

 
 #include "../../inc/MarlinConfig.h"
 
-#if HAS_LCD_MENU && ENABLED(MMU2_MENUS)
+#if BOTH(HAS_LCD_MENU, MMU2_MENUS)
 
 #include "../../feature/mmu2/mmu2.h"
 #include "menu_mmu2.h"
   return currentTool;
 }
 
-#endif //  HAS_LCD_MENU && ENABLED(PRUSA_MMU2_MENUS)
+#endif // HAS_LCD_MENU && MMU2_MENUS

Marlin/src/lcd/menu/menu_motion.cpp

   START_MENU();
   BACK_ITEM(MSG_MOTION);
 
-  #if HAS_SOFTWARE_ENDSTOPS && ENABLED(SOFT_ENDSTOPS_MENU_ITEM)
+  #if BOTH(HAS_SOFTWARE_ENDSTOPS, SOFT_ENDSTOPS_MENU_ITEM)
     EDIT_ITEM(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstops_enabled);
   #endif
 

Marlin/src/lcd/menu/menu_ubl.cpp

 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && ENABLED(AUTO_BED_LEVELING_UBL)
+#if BOTH(HAS_LCD_MENU, AUTO_BED_LEVELING_UBL)
 
 #include "menu.h"
 #include "../../gcode/gcode.h"

Marlin/src/lcd/ultralcd.cpp

   constexpr uint8_t MAX_MESSAGE_LENGTH = 63;
 #endif
 
-#if HAS_SPI_LCD || ENABLED(EXTENSIBLE_UI)
+#if EITHER(HAS_SPI_LCD, EXTENSIBLE_UI)
   uint8_t MarlinUI::alert_level; // = 0
   char MarlinUI::status_message[MAX_MESSAGE_LENGTH + 1];
 #endif
 ///////////// Keypad Handling //////////////
 ////////////////////////////////////////////
 
-#if ENABLED(REPRAPWORLD_KEYPAD) && HAS_ENCODER_ACTION
+#if BOTH(REPRAPWORLD_KEYPAD, HAS_ENCODER_ACTION)
 
   volatile uint8_t MarlinUI::keypad_buttons;
 
     if (old_frm != new_frm) {
       feedrate_percentage = new_frm;
       encoderPosition = 0;
-      #if HAS_BUZZER && ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+      #if BOTH(HAS_BUZZER, BEEP_ON_FEEDRATE_CHANGE)
         static millis_t next_beep;
         #ifndef GOT_MS
           const millis_t ms = millis();
       if (encoderPastThreshold || lcd_clicked) {
         if (encoderPastThreshold) {
 
-          #if HAS_LCD_MENU && ENABLED(ENCODER_RATE_MULTIPLIER)
+          #if BOTH(HAS_LCD_MENU, ENCODER_RATE_MULTIPLIER)
 
             int32_t encoderMultiplier = 1;
 
       refresh(LCDVIEW_REDRAW_NOW);
     }
 
-    #if HAS_LCD_MENU && ENABLED(SCROLL_LONG_FILENAMES)
+    #if BOTH(HAS_LCD_MENU, SCROLL_LONG_FILENAMES)
       // If scrolling of long file names is enabled and we are in the sd card menu,
       // cause a refresh to occur until all the text has scrolled into view.
       if (currentScreen == menu_media && !lcd_status_update_delay--) {
           #if HAS_SLOW_BUTTONS
             | slow_buttons
           #endif
-          #if ENABLED(TOUCH_BUTTONS) && HAS_ENCODER_ACTION
-            | (touch_buttons
-              #if HAS_ENCODER_WHEEL
-                & (~(EN_A | EN_B))
-              #endif
-            )
+          #if BOTH(TOUCH_BUTTONS, HAS_ENCODER_ACTION)
+            | (touch_buttons & TERN_(HAS_ENCODER_WHEEL, & ~(EN_A | EN_B)))
           #endif
         );
 
       next_filament_display = ms + 5000UL; // Show status message for 5s
     #endif
 
-    #if HAS_SPI_LCD && ENABLED(STATUS_MESSAGE_SCROLLING)
+    #if BOTH(HAS_SPI_LCD, STATUS_MESSAGE_SCROLLING)
       status_scroll_offset = 0;
     #endif
 

Marlin/src/lcd/ultralcd.h

   #include "../libs/buzzer.h"
 #endif
 
-#if HAS_LCD_MENU || ENABLED(ULTIPANEL_FEEDMULTIPLY)
+#if EITHER(HAS_LCD_MENU, ULTIPANEL_FEEDMULTIPLY)
   #define HAS_ENCODER_ACTION 1
 #endif
 #if (!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTONS_EXIST(EN1, EN2)

Marlin/src/module/configuration_store.cpp

         HOTEND_LOOP() {
           CONFIG_ECHO_START();
           SERIAL_ECHOPAIR_P(
-            #if HAS_MULTI_HOTEND && ENABLED(PID_PARAMS_PER_HOTEND)
+            #if BOTH(HAS_MULTI_HOTEND, PID_PARAMS_PER_HOTEND)
               PSTR("  M301 E"), e,
               SP_P_STR
             #else

Marlin/src/module/motion.cpp

 
       if (TERN0(DELTA, !all_axes_homed())) return;
 
-      #if HAS_HOTEND_OFFSET && ENABLED(DELTA)
+      #if BOTH(HAS_HOTEND_OFFSET, DELTA)
         // The effector center position will be the target minus the hotend offset.
         const xy_pos_t offs = hotend_offset[active_extruder];
       #else
     DEBUG_ECHOLNPGM(")");
   }
 
-  #if HOMING_Z_WITH_PROBE && HAS_HEATED_BED && ENABLED(WAIT_FOR_BED_HEATER)
+  #if ALL(HOMING_Z_WITH_PROBE, HAS_HEATED_BED, WAIT_FOR_BED_HEATER)
     // Wait for bed to heat back up between probing points
     if (axis == Z_AXIS && distance < 0)
       thermalManager.wait_for_bed_heating();
   // Fast move towards endstop until triggered
   if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Home 1 Fast:");
 
-  #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH)
+  #if BOTH(HOMING_Z_WITH_PROBE, BLTOUCH)
     if (axis == Z_AXIS && bltouch.deploy()) return; // The initial DEPLOY
   #endif
 
 
   do_homing_move(axis, 1.5f * max_length(TERN(DELTA, Z_AXIS, axis)) * axis_home_dir);
 
-  #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) && DISABLED(BLTOUCH_HS_MODE)
+  #if BOTH(HOMING_Z_WITH_PROBE, BLTOUCH) && DISABLED(BLTOUCH_HS_MODE)
     if (axis == Z_AXIS) bltouch.stow(); // Intermediate STOW (in LOW SPEED MODE)
   #endif
 
     // Slow move towards endstop until triggered
     if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Home 2 Slow:");
 
-    #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) && DISABLED(BLTOUCH_HS_MODE)
+    #if BOTH(HOMING_Z_WITH_PROBE, BLTOUCH) && DISABLED(BLTOUCH_HS_MODE)
       if (axis == Z_AXIS && bltouch.deploy()) return; // Intermediate DEPLOY (in LOW SPEED MODE)
     #endif
 
     do_homing_move(axis, 2 * bump, get_homing_bump_feedrate(axis));
 
-    #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH)
+    #if BOTH(HOMING_Z_WITH_PROBE, BLTOUCH)
       if (axis == Z_AXIS) bltouch.stow(); // The final STOW
     #endif
   }

Marlin/src/module/probe.cpp

 bool Probe::probe_down_to_z(const float z, const feedRate_t fr_mm_s) {
   if (DEBUGGING(LEVELING)) DEBUG_POS(">>> Probe::probe_down_to_z", current_position);
 
-  #if HAS_HEATED_BED && ENABLED(WAIT_FOR_BED_HEATER)
+  #if BOTH(HAS_HEATED_BED, WAIT_FOR_BED_HEATER)
     thermalManager.wait_for_bed_heating();
   #endif
 

Marlin/src/module/stepper.cpp

 
 // public:
 
-#if HAS_EXTRA_ENDSTOPS || ENABLED(Z_STEPPER_AUTO_ALIGN)
+#if EITHER(HAS_EXTRA_ENDSTOPS, Z_STEPPER_AUTO_ALIGN)
   bool Stepper::separate_multi_axis = false;
 #endif
 
   TERN_(HAS_X2_DIR, X2_DIR_INIT());
   #if HAS_Y_DIR
     Y_DIR_INIT();
-    #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_DIR
+    #if BOTH(Y_DUAL_STEPPER_DRIVERS, HAS_Y2_DIR)
       Y2_DIR_INIT();
     #endif
   #endif
   #if HAS_Y_ENABLE
     Y_ENABLE_INIT();
     if (!Y_ENABLE_ON) Y_ENABLE_WRITE(HIGH);
-    #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_ENABLE
+    #if BOTH(Y_DUAL_STEPPER_DRIVERS, HAS_Y2_ENABLE)
       Y2_ENABLE_INIT();
       if (!Y_ENABLE_ON) Y2_ENABLE_WRITE(HIGH);
     #endif

Marlin/src/module/stepper.h

 
   public:
 
-    #if HAS_EXTRA_ENDSTOPS || ENABLED(Z_STEPPER_AUTO_ALIGN)
+    #if EITHER(HAS_EXTRA_ENDSTOPS, Z_STEPPER_AUTO_ALIGN)
       static bool separate_multi_axis;
     #endif
 
       static void microstep_readings();
     #endif
 
-    #if HAS_EXTRA_ENDSTOPS || ENABLED(Z_STEPPER_AUTO_ALIGN)
+    #if EITHER(HAS_EXTRA_ENDSTOPS, Z_STEPPER_AUTO_ALIGN)
       FORCE_INLINE static void set_separate_multi_axis(const bool state) { separate_multi_axis = state; }
     #endif
     #if ENABLED(X_DUAL_ENDSTOPS)

Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h

 //
 // Z Probe (when not Z_MIN_PIN)
 //
-#if !defined(Z_MIN_PROBE_PIN) && !(HAS_CUTTER && ENABLED(BOARD_REV_1_0))
+#if !defined(Z_MIN_PROBE_PIN) && !BOTH(HAS_CUTTER, BOARD_REV_1_0)
   #define Z_MIN_PROBE_PIN              Z_MAX_PIN
 #endif
 
 #define Z_DIR_PIN                             39
 #define Z_ENABLE_PIN                          35
 
-#if HAS_CUTTER && ENABLED(BOARD_REV_1_1_TO_1_3) && EXTRUDERS == 1
+#if BOTH(HAS_CUTTER, BOARD_REV_1_1_TO_1_3) && EXTRUDERS == 1
   // Move E0 to the spare and get Spindle/Laser signals from E0
   #define E0_STEP_PIN                         49
   #define E0_DIR_PIN                          47