marlin

Graphique des révisions

Auteur	SHA1	Message	Date
Christian Thalhammer	3183a14755	-added Configuration for GEN7 which worked for me	il y a 12 ans
Christian Thalhammer	13e2ad2831	- added info for using GEN7 configuration	il y a 12 ans
Bernhard	212515148e	added m240 photography support. default off	il y a 13 ans
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	il y a 13 ans
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	il y a 13 ans
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	il y a 13 ans
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	il y a 13 ans
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	il y a 13 ans
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	il y a 13 ans
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	il y a 13 ans
Bernhard	aa4f9a6474	better values.	il y a 13 ans
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	il y a 13 ans
Bernhard	1ec0c3b68a	extruder runout prevention.	il y a 13 ans
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	il y a 13 ans
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	il y a 13 ans
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	il y a 13 ans
Erik van der Zalm	af22e9cd38	Some advance modifications	il y a 13 ans
Bernhard	4f909963e4	make QUICKHOME configureable	il y a 13 ans
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) Advance (not tested)	il y a 13 ans
Bernhard	59205ac5fc	preliminiary implementation for the early heating finish. Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed. its kind of not so cool, because you need 6 more ints. Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways. Then it would be much easier. to have the offsets without additional variables.	il y a 13 ans
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	il y a 13 ans
Erik van der Zalm	aad4b75b94	First parts 2nd extruder	il y a 13 ans
Bernhard	a0dc66f7bf	Home retract distance configureable per axis.	il y a 13 ans
Bernhard	6d6f323535	make an option if sd-card stop should release the steppers.	il y a 13 ans
Bernhard	74d0032e25	cooldown blocking selectable by #define.	il y a 13 ans
Erik van der Zalm	c0f8c9fd72	Seperate ENDSTOP_INVERTING for X Y and Z Added simple endstop filter. Corrected M114 count display.	il y a 13 ans
Erik van der Zalm	2e43f9c809	Changed min max temperature code.	il y a 13 ans
Bernhard Kubicek	8a1e719a3f	overworked config file	il y a 13 ans
Bernhard Kubicek	f52e1a9571	autotemp working, default=disabled.	il y a 13 ans
Bernhard Kubicek	70650c331d	corrected the ultimaker default values, the previous had a calculation error: see: http://groups.google.com/group/ultimaker/browse_thread/thread/9190678863	il y a 13 ans
Bernhard Kubicek	edb5ea7efa	the normal config again..	il y a 13 ans
Bernhard Kubicek	64f2121ab1	updated to sdfatlib2010902	il y a 13 ans
Erik van der Zalm	b15902d3b5	Fixed bug in configuration.h	il y a 13 ans
Erik van der Zalm	e7dca8614b	Advance experiments. Not working yet.	il y a 13 ans
Bernhard Kubicek	a9c7da06e3	and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h	il y a 13 ans
Bernhard Kubicek	7919a40d06	watchdog,percent done,	il y a 13 ans
Erik van der Zalm	805d37f77b	Fixed some small planner bugs	il y a 13 ans
Erik van der Zalm	5fd41ae872	Some fixes in planner	il y a 13 ans
Erik van der Zalm	95126c09c0	Added slowdown	il y a 13 ans
Erik van der Zalm	331e82dcd3	Buffer size > 16	il y a 13 ans
Erik van der Zalm	1d0452f10c	250000 baud	il y a 13 ans
Bernhard Kubicek	c57906b627	fixed bug with adjusting ki in realtime.	il y a 13 ans
Erik van der Zalm	65934eee9c	A lot of changes in the planner code	il y a 13 ans
Bernhard Kubicek	36958ee305	minor changes and first not-well working version of autotemp	il y a 13 ans
Bernhard Kubicek	27361e7cd0	beautified the config. ordered it into thematic sections.	il y a 13 ans
Erik van der Zalm	d3bfffcb6e	Corrected thermistor naming	il y a 13 ans
Bernhard Kubicek	87aaf0f70a	static'ified Marlin.pde.	il y a 13 ans
Erik van der Zalm	76b3f805c0	Added teensylu pins	il y a 13 ans
Bernhard Kubicek	1d171e9e52	reformating and some minor bugs/things found on the way.	il y a 13 ans
Bernhard Kubicek	2afb7bd4cf	refactured temperature.cpp so that there are now abstract functions to access temperatures.	il y a 13 ans

1 Révisions (3183a14755dbcdac8a3a0a7f66737895a953ad41)