Scott Lahteine
3a9a3e5ed8
Fix Issue #1356 – remove EXTRUDER1_Z_OFFSET
This define is not used.
hace 9 años
Scott Lahteine
54d5b52a2e
Merge pull request #1399 from beanz/use-bed-defines-not-extruder-ones
Code wont compile with extruder but without bed runaway protection defined.
hace 9 años
Mark Hindess
0ce252ba7a
This ifdef is for bed code so should use bed constants for testing.
Without this fix, the code wont compile with extruder but without bed
runaway protection defined.
hace 9 años
Scott Lahteine
9040446780
Merge pull request #1395 from AnHardt/iss1394
removed function step_wait() from stepper.cpp
hace 9 años
Scott Lahteine
25f79c5010
Merge pull request #1391 from CONSULitAS/Development-newBoard_K8200
Add: Board for Vellemann K8200 (derived from 3Drag)
hace 9 años
Scott Lahteine
9ce75ab7de
Merge pull request #1386 from roglio/Development
Fixing a build error for melzi and gfx display
hace 9 años
Scott Lahteine
99e6ce901b
Merge pull request #1393 from thinkyhead/issue_1385_timing
Add proper delay in stepper.cpp
hace 9 años
Scott Lahteine
15a00a5a7c
Add 1µs delay in other appropriate spots
hace 9 años
AnHardt
23cb899c5a
removed function step_wait() from stepper.cpp
removed function step_wait() from stepper.cpp because its used nowhere.
hace 9 años
Scott Lahteine
d9d4a78e0f
Add proper delay in stepper.cpp
Issue #1385 describes a delay that the compiler is optimizing out and
this solution.
hace 9 años
CONSULitAS
d1322dafc9
Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag , too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
hace 9 años
CONSULitAS
3b50a5e2e6
Add: Board for Vellemann K8200 (derived from 3Drag)
## Add: Board for Vellemann K8200 (derived from 3Drag)
* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78
* language.h.: machine name and firmware URL for new board
* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments
hace 9 años
Scott Lahteine
4f35de991a
Merge pull request #1383 from CONSULitAS/Development
Update Boards.h for Vellemann K8200 - comment only
hace 9 años
Scott Lahteine
91f7cc2e6d
Merge pull request #1380 from chertykov/Development
Remove hardcoded programmer option (-cwiring).
hace 9 años
roglio
22571ca13d
Revert "Configuration for Aurora Z605"
This reverts commit 935ee968a7 .
hace 9 años
roglio
935ee968a7
Configuration for Aurora Z605
Still not fine tuned but working.
hace 9 años
roglio
ccdbeda526
Fixing a build error for melzi and gfx display
When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.
This is a fix for the issue: now my configuration works.
hace 9 años
CONSULitAS
e13f159343
Update Boards.h for Vellemann K8200 - comment only
## Update Boards.h for Vellemann K8200 - comment only
* Boards.h: updated comment for board 3Drag - K8200 uses same board
hace 9 años
CONSULitAS
51c7f2fd5a
Revert "## Add: Example Configuration for Vellemann K8200"
This reverts commit 5333590ac2 .
hace 9 años
CONSULitAS
5333590ac2
## Add: Example Configuration for Vellemann K8200
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)
* K8200/language.h: updated machine name and URL for K8200
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch
* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
hace 9 años
Denis Chertykov
ba3ac40b9d
Remove hardcoded programmer option (-cwiring). Use variable AVRDUDE_PROGRAMMER.
Change default value of AVRDUDE_PROGRAMMER to 'wiring'.
hace 9 años
daid
993bcd370f
Merge pull request #1373 from MarlinFirmware/revert-1350-Development
Revert "Reduce PROGMEM warnings"
hace 9 años
daid
53f971095d
Revert "Reduce PROGMEM warnings"
hace 9 años
Bo Herrmannsen
5c7e38478b
Merge pull request #1369 from PxT/patch-1
Update printrboard pin assignments
hace 9 años
PxT
67b597ad46
Update printrboard pin assignments
Backported from Printrbot branch, allows the fan to work correctly.
hace 9 años
Bo Herrmannsen
88fe6777bf
Update README.md
hace 9 años
galexander1
1a2f796dc7
Merge pull request #1368 from MarlinFirmware/revert-1357-SDlib
Revert "Move Sd library out into library"
hace 9 años
galexander1
d4880a9e60
Revert "Move Sd library out into library"
hace 9 años
Bo Herrmannsen
ccdb086fc8
Merge pull request #1363 from PxT/patch-1
Fixes #1361
hace 9 años
Bo Herrmannsen
5151db5c2f
Merge pull request #1349 from msutas/patch-2
Improvement - G29 Option for Not Retracting Servo
hace 9 años
Bo Herrmannsen
1746b2582b
Merge pull request #1332 from Sniffle/Development
Rambo FAN_PIN documentation and servo support
hace 9 años
Bo Herrmannsen
4b51b5a46d
Merge pull request #1357 from odewdney/SDlib
Move Sd library out into library
hace 9 años
Bo Herrmannsen
f2cb4a3655
Merge pull request #1353 from thawkins/Development
fix avrdude upload in makefile
hace 9 años
Bo Herrmannsen
2d398393bd
Merge pull request #1359 from PxT/patch-2
Update GCodes.md
hace 9 años
PxT
9fd4292923
Fixes #1361
hace 9 años
PxT
d4c8cfe1f2
Update GCodes.md
Removed remaining angle brackets which are not displayed properly in Github-flavored Markdown.
hace 9 años
odewdney
cf50c0eff8
Arduino.h case sensitive include
hace 9 años
odewdney
abdb974d7f
Changed dir sep from windows to unix
hace 9 años
odewdney
db3b4d0c98
Add library to build
hace 9 años
odewdney
f84ff4ba7d
Move SD Fat library out of main src
hace 9 años
Bo Herrmannsen
ab074dac17
Merge pull request #1344 from grob6000/independent_pid
Independent PID parameters for each extruder
hace 9 años
Bo Herrmannsen
d4a665694a
Merge pull request #1350 from odewdney/Development
Reduce PROGMEM warnings
hace 9 años
Bo Herrmannsen
b6623a0d49
Merge pull request #1351 from PxT/patch-1
Update GCodes.md
hace 9 años
odewdney
9d9c859ac1
First move of SdFat library
hace 9 años
Tim Hawkins
5045d17a39
fix avrdude upload in makefile
hace 9 años
PxT
848475a5b0
Update GCodes.md
Sort Gcodes numerically, other minor formatting changes
hace 9 años
msutas
3a5a6f42fb
Corrected the ABL grid option
G29 E was not retracting the probe on the last probe point when used with ABL grid. Corrected.
hace 9 años
odewdney
cd55a93a13
re-add blank line
hace 9 años
odewdney
23bfe30036
moved include themister to temperature.c
hace 9 años
odewdney
538859669d
Removing compiler warnings for progmem
hace 9 años