This define is not used.

Code wont compile with extruder but without bed runaway protection defined.

Without this fix, the code wont compile with extruder but without bed
runaway protection defined.

removed function step_wait() from stepper.cpp

Add: Board for Vellemann K8200 (derived from 3Drag)

Fixing a build error for melzi and gfx display

Add proper delay in stepper.cpp

removed function step_wait() from stepper.cpp because its used nowhere.

Issue #1385 describes a delay that the compiler is optimizing out and
this solution.

# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391

* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag, too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well

## Add: Board for Vellemann K8200 (derived from 3Drag)

* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78

* language.h.: machine name and firmware URL for new board

* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments

Update Boards.h for Vellemann K8200 - comment only

Remove hardcoded programmer option (-cwiring).

This reverts commit 935ee968a7.

Still not fine tuned but working.

When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.

This is a fix for the issue: now my configuration works.

## Update Boards.h for Vellemann K8200 - comment only

* Boards.h: updated comment for board 3Drag - K8200 uses same board

This reverts commit 5333590ac2.

* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)

* K8200/language.h: updated machine name and URL for K8200

* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch

* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well

Change default value of AVRDUDE_PROGRAMMER to 'wiring'.

Revert "Reduce PROGMEM warnings"

Update printrboard pin assignments

Backported from Printrbot branch, allows the fan to work correctly.

Revert "Move Sd library out into library"

Fixes #1361

Improvement - G29 Option for Not Retracting Servo

Rambo FAN_PIN documentation and servo support

Move Sd library out into library

fix avrdude upload in makefile

Update GCodes.md

Removed remaining angle brackets which are not displayed properly in Github-flavored Markdown.

Independent PID parameters for each extruder

Reduce PROGMEM warnings

Update GCodes.md

Sort Gcodes numerically, other minor formatting changes

G29 E was not retracting the probe on the last probe point when used with ABL grid. Corrected.