marlin

Commit Graph

Автор	SHA1	Съобщение	Дата
Christian Thalhammer	4cc8e37bf1	lcd menue "move_axis" added	преди 12 години
Christian Thalhammer	b5fae1104b	fixed sUICIDE_PIN disable	преди 12 години
Christian Thalhammer	25cd8af536	added arduino ide GEN7 support Files	преди 12 години
Christian Thalhammer	14702089ee	-disable TEMP Min MAX Kill while using PS_ON Pin ON GEN7 there is no temperature reading when power is off.. so Marlin would kill itself. There seems to be an update from "Traumflug" on GEN7 using standby VCC for thermistors.	преди 12 години
Christian Thalhammer	b51e8bf7e5	-disabled CARDDETECT if PIN is set to -1 - redo disable Beeper if PIN is set to -1	преди 12 години
Christian Thalhammer	3183a14755	-added Configuration for GEN7 which worked for me	преди 12 години
Christian Thalhammer	5edef148fe	-disalbe beeper if BEEPER_PIN = -1	преди 12 години
Christian Thalhammer	13e2ad2831	- added info for using GEN7 configuration	преди 12 години
Christian Thalhammer	59cc5f889e	- added support for ATMega1284P	преди 12 години
Christian Thalhammer	a11f3b2d2f	- Pins for modified GEN7 assigned - Added support for ATMega1284	преди 12 години
Bernhard	157aa7f2fd	m115 eol fix	преди 13 години
Bernhard	7aeb45303d	small mistake	преди 13 години
Bernhard	cee5f9020a	added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.	преди 13 години
Bernhard	3814bbb529	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	преди 13 години
Bernhard	729cde4475	fix autostart failure if in wrong directory	преди 13 години
Bernhard	396270a0de	fix duplicated definition of MOSI MISO pins in case motherboard==33	преди 13 години
Bernhard	11f2dafc4e	one step closer to a functional makefile..	преди 13 години
Bernhard	8463e39a4a	starting with sanguino arduino 1.0 compatibility	преди 13 години
Bernhard	2bc160a978	add wiring.h, that can be used to overwrite: arduino-0023/hardware/arduino/cores/arduino/wiring.h this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino	преди 13 години
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	преди 13 години
Bernhard	3c1a4aac2b	header file simplification	преди 13 години
Bernhard	212515148e	added m240 photography support. default off	преди 13 години
Bernhard	6735025428	cooldown	преди 13 години
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	преди 13 години
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	преди 13 години
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	преди 13 години
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	преди 13 години
Erik van der Zalm	617968ab76	G92 fix	преди 13 години
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	преди 13 години
Bernhard	3320a5b37d	make autotemp compatile for use without pid	преди 13 години
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	преди 13 години
Bernhard	82c99625fa	instant stop of sd prints from the panel.	преди 13 години
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	преди 13 години
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	преди 13 години
Bernhard	b1d84d879b	st_synchronize back to normal..	преди 13 години
Bernhard	dde4b40fa9	disable steppers in runout prevention	преди 13 години
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	преди 13 години
Bernhard	aa4f9a6474	better values.	преди 13 години
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	преди 13 години
Bernhard	1ec0c3b68a	extruder runout prevention.	преди 13 години
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	преди 13 години
Bernhard	cc4a9cdb69	added autostart procedure trigger to the ultralcd menu	преди 13 години
Bernhard	61c943b4bf	fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.	преди 13 години
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	преди 13 години
Bernhard	754d2d69b2	z homing sound fix, for now until the actual cause is found..	преди 13 години
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	преди 13 години
Bernhard	460b788d78	repaired homing position setting.	преди 13 години
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	преди 13 години
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	преди 13 години
Erik van der Zalm	89e832c295	Update endstops only for homing. (use less resources when not used)	преди 13 години

Първа Предишна 1 2 3 4 5 Следваща Последна

204 Ревизии (4cc8e37bf145031abdb3093b541f162847e30510)