marlin

Commit Graph

작성자	SHA1	메시지	날짜
Christian Thalhammer	5edef148fe	-disalbe beeper if BEEPER_PIN = -1	12 년 전
Christian Thalhammer	13e2ad2831	- added info for using GEN7 configuration	12 년 전
Christian Thalhammer	59cc5f889e	- added support for ATMega1284P	12 년 전
Christian Thalhammer	a11f3b2d2f	- Pins for modified GEN7 assigned - Added support for ATMega1284	12 년 전
Bernhard	157aa7f2fd	m115 eol fix	13 년 전
Bernhard	7aeb45303d	small mistake	13 년 전
Bernhard	cee5f9020a	added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.	13 년 전
Bernhard	3814bbb529	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	13 년 전
Bernhard	729cde4475	fix autostart failure if in wrong directory	13 년 전
Bernhard	396270a0de	fix duplicated definition of MOSI MISO pins in case motherboard==33	13 년 전
Bernhard	11f2dafc4e	one step closer to a functional makefile..	13 년 전
Bernhard	8463e39a4a	starting with sanguino arduino 1.0 compatibility	13 년 전
Bernhard	2bc160a978	add wiring.h, that can be used to overwrite: arduino-0023/hardware/arduino/cores/arduino/wiring.h this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino	13 년 전
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	13 년 전
Bernhard	3c1a4aac2b	header file simplification	13 년 전
Bernhard	212515148e	added m240 photography support. default off	13 년 전
Bernhard	6735025428	cooldown	13 년 전
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	13 년 전
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	13 년 전
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	13 년 전
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	13 년 전
Erik van der Zalm	617968ab76	G92 fix	13 년 전
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	13 년 전
Bernhard	3320a5b37d	make autotemp compatile for use without pid	13 년 전
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	13 년 전
Bernhard	82c99625fa	instant stop of sd prints from the panel.	13 년 전
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	13 년 전
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	13 년 전
Bernhard	b1d84d879b	st_synchronize back to normal..	13 년 전
Bernhard	dde4b40fa9	disable steppers in runout prevention	13 년 전
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	13 년 전
Bernhard	aa4f9a6474	better values.	13 년 전
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	13 년 전
Bernhard	1ec0c3b68a	extruder runout prevention.	13 년 전
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	13 년 전
Bernhard	cc4a9cdb69	added autostart procedure trigger to the ultralcd menu	13 년 전
Bernhard	61c943b4bf	fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.	13 년 전
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	13 년 전
Bernhard	754d2d69b2	z homing sound fix, for now until the actual cause is found..	13 년 전
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	13 년 전
Bernhard	460b788d78	repaired homing position setting.	13 년 전
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 년 전
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	13 년 전
Erik van der Zalm	89e832c295	Update endstops only for homing. (use less resources when not used)	13 년 전
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	13 년 전
Erik van der Zalm	af22e9cd38	Some advance modifications	13 년 전
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	13 년 전
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	13 년 전
Bernhard	4f909963e4	make QUICKHOME configureable	13 년 전
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) Advance (not tested)	13 년 전

처음 이전 1 2 3 4 다음 마지막

198 커밋 (5edef148fe8db2e5210c28b5c28997bf33e7c64e)