marlin

Revīziju grafs

Autors	SHA1	Ziņojums	Datums
Christian Thalhammer	5edef148fe	-disalbe beeper if BEEPER_PIN = -1	12 gadus atpakaļ
Christian Thalhammer	13e2ad2831	- added info for using GEN7 configuration	12 gadus atpakaļ
Christian Thalhammer	59cc5f889e	- added support for ATMega1284P	12 gadus atpakaļ
Christian Thalhammer	a11f3b2d2f	- Pins for modified GEN7 assigned - Added support for ATMega1284	12 gadus atpakaļ
Bernhard	157aa7f2fd	m115 eol fix	13 gadus atpakaļ
Bernhard	7aeb45303d	small mistake	13 gadus atpakaļ
Bernhard	cee5f9020a	added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.	13 gadus atpakaļ
Bernhard	3814bbb529	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	13 gadus atpakaļ
Bernhard	729cde4475	fix autostart failure if in wrong directory	13 gadus atpakaļ
Bernhard	396270a0de	fix duplicated definition of MOSI MISO pins in case motherboard==33	13 gadus atpakaļ
Bernhard	11f2dafc4e	one step closer to a functional makefile..	13 gadus atpakaļ
Bernhard	8463e39a4a	starting with sanguino arduino 1.0 compatibility	13 gadus atpakaļ
Bernhard	2bc160a978	add wiring.h, that can be used to overwrite: arduino-0023/hardware/arduino/cores/arduino/wiring.h this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino	13 gadus atpakaļ
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	13 gadus atpakaļ
Bernhard	3c1a4aac2b	header file simplification	13 gadus atpakaļ
Bernhard	212515148e	added m240 photography support. default off	13 gadus atpakaļ
Bernhard	6735025428	cooldown	13 gadus atpakaļ
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	13 gadus atpakaļ
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	13 gadus atpakaļ
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	13 gadus atpakaļ
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	13 gadus atpakaļ
Erik van der Zalm	617968ab76	G92 fix	13 gadus atpakaļ
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	13 gadus atpakaļ
Bernhard	3320a5b37d	make autotemp compatile for use without pid	13 gadus atpakaļ
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	13 gadus atpakaļ
Bernhard	82c99625fa	instant stop of sd prints from the panel.	13 gadus atpakaļ
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	13 gadus atpakaļ
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	13 gadus atpakaļ
Bernhard	b1d84d879b	st_synchronize back to normal..	13 gadus atpakaļ
Bernhard	dde4b40fa9	disable steppers in runout prevention	13 gadus atpakaļ
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	13 gadus atpakaļ
Bernhard	aa4f9a6474	better values.	13 gadus atpakaļ
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	13 gadus atpakaļ
Bernhard	1ec0c3b68a	extruder runout prevention.	13 gadus atpakaļ
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	13 gadus atpakaļ
Bernhard	cc4a9cdb69	added autostart procedure trigger to the ultralcd menu	13 gadus atpakaļ
Bernhard	61c943b4bf	fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.	13 gadus atpakaļ
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	13 gadus atpakaļ
Bernhard	754d2d69b2	z homing sound fix, for now until the actual cause is found..	13 gadus atpakaļ
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	13 gadus atpakaļ
Bernhard	460b788d78	repaired homing position setting.	13 gadus atpakaļ
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 gadus atpakaļ
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	13 gadus atpakaļ
Erik van der Zalm	89e832c295	Update endstops only for homing. (use less resources when not used)	13 gadus atpakaļ
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	13 gadus atpakaļ
Erik van der Zalm	af22e9cd38	Some advance modifications	13 gadus atpakaļ
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	13 gadus atpakaļ
Bernhard	dfd240b260	overworked autotemp, removed one layer of nesting from the ultralcd.	13 gadus atpakaļ
Bernhard	4f909963e4	make QUICKHOME configureable	13 gadus atpakaļ
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) Advance (not tested)	13 gadus atpakaļ

Pirmā Iepriekšējā 1 2 3 4 Nākamā Pēdējā

198 Revīzijas (5edef148fe8db2e5210c28b5c28997bf33e7c64e)