marlin

Commit Graph

作者	SHA1	備註	提交日期
Michael Moon	ab01658fd2	local configuration stuff- WATCHPERIOD causes breakage, disable. few other misc changes	12 年之前
Michael Moon	42bedb3f60	PROGMEM elements must be const	12 年之前
Michael Moon	a991bde523	enable auto-reset before programming, disable afterwards	12 年之前
Michael Moon	3e575533c5	get M81 working	12 年之前
Michael Moon	2ae2ead97b	help residency not overflow	12 年之前
Michael Moon	71dc82e0b4	my local configuration	12 年之前
Michael Moon	5aadc2f5ca	cardreader needs to include some other files	12 年之前
Michael Moon	8d0916af13	allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications	12 年之前
Bernhard	157aa7f2fd	m115 eol fix	13 年之前
Bernhard	7aeb45303d	small mistake	13 年之前
Bernhard	cee5f9020a	added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.	13 年之前
Bernhard	3814bbb529	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	13 年之前
Bernhard	729cde4475	fix autostart failure if in wrong directory	13 年之前
Bernhard	396270a0de	fix duplicated definition of MOSI MISO pins in case motherboard==33	13 年之前
Bernhard	11f2dafc4e	one step closer to a functional makefile..	13 年之前
Bernhard	8463e39a4a	starting with sanguino arduino 1.0 compatibility	13 年之前
Bernhard	2bc160a978	add wiring.h, that can be used to overwrite: arduino-0023/hardware/arduino/cores/arduino/wiring.h this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino	13 年之前
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	13 年之前
Bernhard	3c1a4aac2b	header file simplification	13 年之前
Bernhard	212515148e	added m240 photography support. default off	13 年之前
Bernhard	6735025428	cooldown	13 年之前
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	13 年之前
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit 651cde8b98.	13 年之前
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	13 年之前
Erik van der Zalm	554cc1718d	Fiexed E_ENABLE_PIN errors	13 年之前
Erik van der Zalm	617968ab76	G92 fix	13 年之前
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	13 年之前
Bernhard	3320a5b37d	make autotemp compatile for use without pid	13 年之前
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	13 年之前
Bernhard	82c99625fa	instant stop of sd prints from the panel.	13 年之前
Bernhard	01001b89d2	repaired nozzle runout prevention to not collide with automatic stepper disabeling.	13 年之前
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	13 年之前
Bernhard	b1d84d879b	st_synchronize back to normal..	13 年之前
Bernhard	dde4b40fa9	disable steppers in runout prevention	13 年之前
Bernhard	2bc5e7ec9e	prevent too long extrudes, or too cold extrudes	13 年之前
Bernhard	aa4f9a6474	better values.	13 年之前
Bernhard	87fd249c43	made runout prevention independent of tempeorarily set esteps	13 年之前
Bernhard	1ec0c3b68a	extruder runout prevention.	13 年之前
Bernhard	5b4625f79c	added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.	13 年之前
Bernhard	cc4a9cdb69	added autostart procedure trigger to the ultralcd menu	13 年之前
Bernhard	61c943b4bf	fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.	13 年之前
Keegi	bae1e422f6	Fix M201 not saving settings in all places, so the changes did not get written into EEPROM	13 年之前
Bernhard	754d2d69b2	z homing sound fix, for now until the actual cause is found..	13 年之前
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	13 年之前
Bernhard	460b788d78	repaired homing position setting.	13 年之前
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 年之前
Bernhard	cf50ba140f	added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.	13 年之前
Erik van der Zalm	89e832c295	Update endstops only for homing. (use less resources when not used)	13 年之前
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	13 年之前
Erik van der Zalm	af22e9cd38	Some advance modifications	13 年之前

首頁上一頁 1 2 3 4 5 下一頁末頁

202 次程式碼提交 (ab01658fd2e93dd4ceff47df9fb6b03c95ea9ebf)