Scott Lahteine
f74278b8b1
Add -4 thermocouple to list in configs
6 роки тому
Scott Lahteine
aaaf09bda2
BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION
6 роки тому
Scott Lahteine
4b2f6e3b2b
[2.0.x] Add endstop noise filter (#10796 )
6 роки тому
Scott Lahteine
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it (#10748 )
6 роки тому
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type (#10630 )
6 роки тому
nightdemonx
e911635fb1
Add thermocouple with AD8495 support
6 роки тому
Scott Lahteine
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
6 роки тому
Scott Lahteine
c87b0e21be
Add units to probe speed comments
6 роки тому
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option (#10582 )
6 роки тому
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS (#10483 )
6 роки тому
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing (#10472 )
6 роки тому
KangDroid
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops (#10389 )
6 роки тому
Yunhui Fu
c96412a78f
[2.0.x] UTF-8 language translation support (#10213 )
6 роки тому
Scott Lahteine
82dafbba33
Add Z_PROBE_LOW_POINT to example configs
6 роки тому
Scott Lahteine
dca69efc11
Update Bed PID comments
6 роки тому
Scott Lahteine
5932df7ea1
Add BEZIER_JERK_CONTROL to example configs
6 роки тому
Scott Lahteine
5b3bda1c16
Add Chamber Temp options to example configs
6 роки тому
Scott Lahteine
adcb87f0db
Z Endstop Servo => Z Probe Servo
6 роки тому
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
6 роки тому
Scott Lahteine
c6ff39cc14
Spacing cleanup
6 роки тому
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069 )
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
6 роки тому
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058 )
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
6 роки тому
Scott Lahteine
79e6d890d5
Add UNKNOWN_Z_NO_RAISE to example configs
6 роки тому
Scott Lahteine
a2a672449a
Updated boot screen description
6 роки тому
Scott Lahteine
54c65fc3cb
Standardize LCD buzz defaults
6 роки тому
Scott Lahteine
4953fb1c88
Standardize encoder defaults
6 роки тому
Scott Lahteine
5684beae90
Bring some configs up to speed
6 роки тому
Scott Lahteine
2024775e07
Spanish (UTF8) Language (#9786 )
From #7314 by @MrAmericanMike
6 роки тому
Scott Lahteine
17d984eab3
Add RESTORE_LEVELING_AFTER_G28 to example configs
6 роки тому
Scott Lahteine
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD (#9740 )
6 роки тому
Scott Lahteine
8733d5a296
Add NUM_RUNOUT_SENSORS to example configs
6 роки тому
Scott Lahteine
ca55f2927a
Pulldown pin mode support (#9701 )
Implemented for LPC1768.
6 роки тому
Roxy-3D
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements (#9661 )
6 роки тому
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503 )
6 роки тому
Scott Lahteine
eecb0188c0
Add ULTI_CONTROLLER to example configs
6 роки тому
Scott Lahteine
4925f60cff
Add MALYAN_LCD to configs
6 роки тому
Scott Lahteine
7d6c009104
Add thermistor 15 tuned for JGAurora A5
6 роки тому
Scott Lahteine
348b454401
Probe bounds based on bed size
6 роки тому
Scott Lahteine
c68ce8667d
Fix and improve Creality configs
6 роки тому
Scott Lahteine
57b61491d3
Set FIL_RUNOUT_PIN for Creality CR10-S
Tested with M43 and found to be connected to DIO 2
6 роки тому
Scott Lahteine
4a4d832344
Use standard encoder pulses/steps for CR-10S
6 роки тому
Scott Lahteine
fa432508b0
Followup to Ender config
6 роки тому
Scott Lahteine
a27fa80a7e
More featureful CR-10S configuration
6 роки тому
Scott Lahteine
77c2d810f9
Bring configs up to date
6 роки тому
Scott Lahteine
8ac246162e
Creality CR-10S configurations
Provided by printedsolid.com
6 роки тому
Scott Lahteine
048486390e
Bring some configs up to date
6 роки тому
GMagician
5295b4713d
[2.0.x] add semitec 104NT-4 (#9119 )
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
6 роки тому
Scott Lahteine
0b4a46fa6c
Bring configs up to date with 1.1.x
6 роки тому
Scott Lahteine
7cc2193bce
Add Tronxy X1 example config (#8972 )
6 роки тому
Thomas Moore
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866 )
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
6 роки тому