marlin

Commit-Graf

Upphovsman	SHA1	Meddelande	Datum
Scott Lahteine	6bead0c1b0	Shorter paths to HAL, ExtUI (#17156)	4 år sedan
Scott Lahteine	bfad23d3e2	(c) 2020	4 år sedan
Scott Lahteine	6e658a7c04	Code style and comment tweaks	4 år sedan
Scott Lahteine	e3fd0519b3	Reduce need for UNUSED	4 år sedan
Scott Lahteine	7d8c38693f	Formatting	4 år sedan
Scott Lahteine	75efa3cdac	Reorganize HAL (#14832)	4 år sedan
Scott Lahteine	056efaba91	Clean up section comments	4 år sedan
Scott Lahteine	93cd66ac11	Tweaky change from (C) to (c)	4 år sedan
Bob Kuhn	81ca5a4cd4	Fix and improve FYSETC LCD support (#13767)	5 år sedan
Scott Lahteine	758c6c9464	Very minor SPI speedup	5 år sedan
Scott Lahteine	0feeef2604	Update copyright in headers	5 år sedan
Scott Lahteine	e1587da228	Clean up HAL_spi_Due.cpp (#13087)	5 år sedan
Scott Lahteine	a5911765c3	Tweak some spacing	5 år sedan
Scott Lahteine	e0956bb572	Drop 'register' storage specifier	5 år sedan
Scott Lahteine	bc75eb2c64	Cleanup for HAL_spi_Due.cpp	5 år sedan
Dave Johnson	c64199941e	Compile only selected PIO environment (#11519)	5 år sedan
etagle	9d98a62699	Followup to HAL optimizations and delays - Cleanups, fixes for Due HAL code. - TC_IER is write-only. Use TC_IMR to test ISR state.	6 år sedan
Scott Lahteine	a1062eec5b	Better handling of DELAY_NS and DELAY_US (#10716) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	6 år sedan
Scott Lahteine	0436e16fb2	Apply shorthand Assembler macros	6 år sedan
Scott Lahteine	d1b619be52	Standardize some hexadecimals	6 år sedan
Bob-the-Kuhn	902c885782	Switch to TMC2130 compatible hardware SPI & misc (#10299)	6 år sedan
Bob-the-Kuhn	509227fd80	change to mode 0	6 år sedan
Bob-the-Kuhn	7308ef7809	Add conditional, give DUE SPI a unique name, fix compiler warnings (#10168)	6 år sedan
Scott Lahteine	dd19e74476	Cleanup trailing whitespace @Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.	6 år sedan
Bob-the-Kuhn	0d8c15c01f	restore PR 9661 files & V1 fix	6 år sedan
Bob-the-Kuhn	bf59a4a6df	Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"	6 år sedan
Bob-the-Kuhn	914bb80bde	removed SDSS init added device & comm drivers for shared SPI LCDs mistyped some updates in ultralcd_impl_DOGM.h remove unwanted changes in onfiguration.h still can't type Update HAL_LCD_class_defines.h include USB mass storage & misc	6 år sedan
Scott Lahteine	ca577c1638	Fix up various spacing, comments, and typos	6 år sedan
Bob-the-Kuhn	ab709ccac1	add USEABLE_HARDWARE_PWM & clear up some compiler warnings	6 år sedan
Scott Lahteine	1c41de16d4	Trailing whitespace clean	6 år sedan
revilor	959a2d2527	Add beginTransaction to HAL SPI (#9019)	6 år sedan
etagle	729a9f55fc	Improved Sw SPI on DUE HAL a bit more. Now the USB MSD can transfer at 750k/s. Previously, it was 500k/s. I think this is the maximum achievable speed using Sw SPI.	6 år sedan
etagle	d8a4db72ac	Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds)	6 år sedan
Eduardo José Tagle	ac168a03c8	Fixes for the Arduino DUE HAL (Serial Port, Graphics Display, EEPROM emulation) (#8651) * Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port * Improving the Fast IO port access implementation on Arduino DUE * Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling) * Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it. * Fixing the case where the serial port selected is the USB device * Adding configuration for the Makerparts 3D printer (www.makerparts.net) * Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration * Fine tuned Maximum acceleration for MakerParts printer * Style cleanup * Style cleanup (2) * Style fixes (3) * Fixing the DUE serial port assignments: Now -1 means the SAM3x USB Device emulating a serial port, and 0 means the USB to serial adapter included as a programming port * Improving the Fast IO port access implementation on Arduino DUE * Implemented EEPROM emulation on Due by storing data on the internal FLASH (with wear leveling) * Implemented a Software SPI for the ST7920 graphics display for the Arduino RAMPS for DUE, as the default one in u8glib is clocking data too fast on ARM, and the display does not understand it. * Fixing the case where the serial port selected is the USB device * Adding configuration for the Makerparts 3D printer (www.makerparts.net) * Tuned MakerParts acceleration on X and Y axis so it never loses steps. Also adjusted pulses per mm to match default hw configuration * Fine tuned Maximum acceleration for MakerParts printer * Style cleanup * Style changes to u8g_dev_st7920_128_64_sw_spi.cpp * Even more improvements to the FastIO HAL for DUE. Now WRITE() is 2 ASM instructions, if value is constant, and 5 cycles if value is not constant. Previously, it was 7..8 cycles * After some problems and debugging, seems we need to align the interrupt vector table to 256 bytes, otherwise, the program sometimes stops working * Moved comments out of macro, otherwise, token pasting does not properly work sometimes * Improved Software SPI implementation on DUE: Now it honors the selected speed passed to spiInit(). This allows much faster SDCARD access, improving SDCARD menus and reducing latency * Update u8g_dev_st7920_128_64_sw_spi.cpp * Disabling EEPROM over FLASH emulatiion if an I2C or SPI EEPROM is present	6 år sedan
Scott Lahteine	c2b1d51f16	HAL whitespace and style cleanup	6 år sedan
Scott Lahteine	54326fb06a	HAL updates	6 år sedan
Christopher Pepper	cfef925559	HAL for DUE architecture	6 år sedan

1 Incheckningar (fa48fbb9b8825ac0e51a43b931e6637a9f25b52c)